Overhead Stirrer Accessories

Compare Tool

Select up to 3 products

Overhead Stirrer Accessories
1 - 27 of 27
Sort
View
Show
  • Swivel Blade Paddles

    Troemner

    Mixes the contents of narrow-mouthed vessels. Creates radial flow. Constructed of durable stainless steel. Swivel blade is attached to the shaft. The blade measures 2"W x 0.5H" (51 x 13mm).

  • LCD & LED Digital Overhead Stirrers & Accessories

    Scilogex

    …digital overhead stirrer models for the safe and effective mixing of large volumes of liquids. LCD and LED Digital overhead stirrer models offer considerable functionality that would not be available on a standard analog overhead stirrer. For example, the Scilogex LCD digital lab stirrers allow…

  • Overhead Stirrers

    Troemner

    …Each mixer maintains constant speed even when the viscosity changes. Mixers are fitted with an adjustable Jacobs style chuck that accepts any accessory shaft . Mixers include adjustable chuck and 8" (20.3cm) mounting rod with carriage bolt and wrench for mounting motor to support stands. …

  • Stands & Clamps for Caframo Overhead Stirrers

    Caframo

    Thomas No. 1177M31 Sturdy stand in a smaller bench footprint, for Caframo compact stirrer models BDC2002 and BDC2010. The unique offset design accommodates Caframo clamp so stirrer locates impeller in centre of vessel. The cast zinc-aluminum alloy base is coated for protection from corrosion and…

  • Adjustable Chuck

    Troemner

    Should be ordered based on the diameter of the motor shaft you are using. Each adjustable Jacobs style chuck can accomodate accessory shafts from 1/16" to 3/8" diameter. These products include a chuck key.

  • Digital Stir-Tester Accessories

    Glas-Col

    Stirrer Shafts, with 4-Blade Propeller Shaft diameter 6.4 mm, with stainless steel, 4-blade propeller on one end Listings show shaft length x propeller diameter Stirrer Shaft, with 3-Blade Propeller 8 mm-diameter shaft has stainless steel propeller and includes coupling Shaft length 222…

  • Stirrer Accessories

    Thermo Scientific Nalgene

    Impellers made of stainless steel (8592H39 through H48) or glass-filled propylene (8592H36) Autoclavable 8592H36 Lower Assembly/Shaft and Impeller; shaft length x diameter: 13-1/2" x 3/8"; impeller diameter: 4". 8592H39 Lower Assembly is for use with the Nalgene 30-gallon,…

  • LT/LR Laboratory Stirrer Accessories

    Thomas®

  • Overhead Stirrer Accessories, Stands and Paddles

    Techne (Bibby Scientific US)

    …with H-pattern base for stability and robust support rod. Both versions include bosshead. Heavy duty stand recommended for use with SS30 overhead stirrer.   Paddle Rods Made from high grade stainless steel, there is a choice of five paddle heads and two lengths of 8mm diameter…

  • Stirrer Accessories, Stirrer Blades

    Dynalon

    Stirrer Blades PTFE construction Fit all standard shafts Will not scratch glassware Hole diameter: 6.5 mm Model 8596G58 to G70 shafts are for use with 8596G18 to G50 blades.

  • Heidolph RZR 1 Stirrer, Universal S2 Stand

    Ace Glass

    Heidolph RZR 1 overhead stirrer with tools and accessories features 2 gears delivering 280 to 2200rpm with analog control. 115v 60Hz input motor is high torque, up to 100Ncm. Use code -32 stir shaft for slow speed, up to 250rpm and code -34 shaft for speeds up to 2200rpm. Universal stand and clamp…

  • Stirrer Accessories, Blades

    Dynalon

    …not scratch or harm glass vessels Usable with most overhead stirrers. Virtually unbreakable Operate at medium to high vacuum Fit standard ground glass joints May be used with all types of standard shaft stirrers in PTFE, glass or stainless steel with 6 or 9.5 mm diameter…

  • Collet Chuck

    Troemner

    Stainless steel precision collet type chuck is used when the motor shaft and accessory shaft are the same diameter. It is true running and is the preferred choice when running at high speeds.

  • IKA® Mechanical Accessories - Stands

    IKA Works

    …backwards. Provides optimum stability required for larger, heavier instruments and attachments, for example with rheological measurements using overhead stirrers. The stand has an adjustment screw which can be used to compensate for an uneven laboratory table surface. Diameter of support rod: 34…

  • Clamping Systems

    Arrow Engineering

    …applications Will hold any stirrer with mounting rod from 3/8” to 5/8” diameter (9.5 to 16 mm). Swivel Clamp (8583L44) Ability to set the stirrer to any compound angle for best stirring action One knob enables lowering or raising of the stirrer, one knob locks stirrer on support rod and one…

  • RZR Overhead Stirrer Accessories

    Heidolph

    Blades Stainless steel with 400 mm shafts

  • Thomas Overhead Stirrer Accessories

    Thomas®

  • Overhead Stirrers Accessories

    IKA Works

    Thomas No. 1203B76 Stirrer diameter: 55 mm Thomas No. 1203B77 Stirrer diameter: 45 mm Thomas No. 1203B78 Stirrer diameter: 42 mm Thomas No. 1183U39 Stirrer diameter: 50 mm

  • Accessories for Caframo Overhead Stirrers

    Caframo

    …for removal from stirrer’s output shaft for cleaning or replacement. Thomas No. 1177M33 Chuck compatible for High Torque and Compact Caframo stirrers, accepting impeller shafts up to 10 mm (3/8”) diameter. Chuck key includes tool for removal from stirrer’s output shaft for…

  • Stirrer Accessories

    Scilogex

    Accessory for OS20-Pro LCD, OS40-Pro LCD, OS20-S LED and OS40-S LED Digital Overhead Stirrers. Blade stirrer Gentle processing samples, used at low and medium speeds Polytetrafluoroethylene (PTFE) coating has low coefficient of friction against a solid

  • Stirrer Accessories

    Scilogex

    Accessory for OS20-Pro LCD, OS40-Pro LCD, OS20-S LED and OS40-S LED Digital Overhead Stirrers. Blades open with increasing speed for stirring in a round vessel with a narrow neck, used at medium and high speeds Polytetrafluoroethylene (PTFE) coating

  • Stirrer Accessories

    Arrow Engineering

    …(10 mm) diameter motor shafts Keyless Chuck, Nylon-bodied Fits 3/8” (10 mm) diameter motor shafts Adjusts to accept stirrers from 1.5 mm to 10 mm o.d. Couplings Flexible coupling with PTFE sleeve for use with glass stirring shaft The 4"…

  • Stir-Pak® and Servodyne™ Mixer Accessories

    Oakton

    Tank clamp lets you mount a mixer head and a controller support (either model 04552-70 or 04552-75) directly onto an open top drum or container (maximum 1-1/2" [38 mm] wall thickness) Support stand has an electropolished cast steel base and 303 stainless steel support rod measuring 29"H x 5/8"…

  • Propeller Shafts

    Troemner

    All stainless steel 303/304 are constructed with 15° pitched blades which creates an axial flow. Various shaft lengths and diameters with permanent 2" or 3.5" 3-blade propeller for every mixing need available. PTFE coating available.

  • Rotary Evaporators, Diagonal Condensers

    Techne (Bibby Scientific US)

    …a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation that is effected by heating from the accessory waterbath. The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum. This reduces the boiling point…

  • Rotary Evaporators, Vertical Condensors

    Techne (Bibby Scientific US)

    …a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation that is effected by heating from the accessory waterbath. The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum. This reduces the boiling point…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.