Mechanical Stirrer

Compare Tool

Select up to 3 products

Mechanical Stirrer
1 - 32 of 34
Sort
View
Show
  • RW 28 Digital Overhead Stirrer

    IKA Works

    Powerful, mechanically controlled laboratory stirrer designed for highly viscous applications for quantities up to 80 l (H2O). It is suitable for intensive mixing for use in laboratories and pilot plants. The stirrer comes equipped with a protection for overheating of the motor by means of…

  • RZR Overhead Stirrers, Model RZR1

    Heidolph

    …wasting or heat generating rheostat Infinitely variable mechanical speed control Quiet, safe and vibration-free performance Operates in any desired position or angle Quick and easy assembly with clamp and stand This compact, rugged stirrer is user-friendly and designed for continuous use.…

  • EXTRACT APP/STIR 6W 250ML 110V

    Techne (Bibby Scientific US)

    … Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching Three 12.7mm diameter support rods are included Round bottom flask capacity of 250ml at all 6 positions Top cover is…

  • FP4 Portable Flocculators

    VELP

    The FP4 is a multiple stirrers with reproducible stirring speeds allowing standard conditions to be met during analysis, a basic requirement in order to obtain reliable and repeatable results. It is a portable model with four stirring places, designed to be used on-site, as it can be powered by…

  • Multi (Extraction) Mantles: 3 Recess Model

    Electrothermal (Bibby Scientific US)

    …models Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching Three 12.7mm diameter support rods are included Round bottom flask capacity from 100ml to 1000ml at all 3 positions Top cover…

  • Stainless Steel Support Jacks

    BrandTech®

    Rugged stainless steel deck and lift mechanism for long life in corrosive environments Ideal for use in fume hoods, solution-baths, marine and industrial laboratories Support miniflasks, jars, columns, large baths, magnetic stirrers, heaters and more Resistant to sanitizing agents…

  • Rotary Evaporators, Diagonal Condensers

    Techne (Bibby Scientific US)

    Simple, counterbalanced lift mechanism PTFE/glass liquid pathway for chemical inertness Sparkless induction motor Long life graphite impregnated PTFE vacuum seal Efficient flask and vapour tube ejection system Rotary evaporators are distillation units that incorporate an…

  • Rotary Evaporators, Vertical Condensors

    Techne (Bibby Scientific US)

    Simple, counterbalanced lift mechanism PTFE/glass liquid pathway for chemical inertness Sparkless induction motor Long life graphite impregnated PTFE vacuum seal Efficient flask and vapour tube ejection system Rotary evaporators are distillation units that incorporate an…

  • JLT Series Flocculators

    VELP

    The JLT Series is a multiple stirrers with reproducible stirring speeds allowing standard conditions to be met during analysis, a basic requirement in order to obtain reliable and repeatable results. JLT Series is available in two configurations: JLT 4, with 4 positions JLT 6, with 6…

  • ESP Ultraflat Magnetic Stirrers

    VELP

    The ESP is an ultraflat magnetic stirrer with no moving mechanical components, it is therefore maintenance-free. The stirring system consists of coils that induce a rotating magnetic field. A gentle start-up ensures optimum progression of the stirring speed whilst its modern, ergonomic structure is…

  • Magnetic Stirrers

    Crystal Technologies

    …maintenance-free unit. Each stirrer has a wide range of speed and magnetic strengths which are adjustable to meet the demands of stirring solutions with different volumes and viscosities. Elegant design with digital control and display Motorless driven mechanism for quiet and…

  • Scienceware® Lattice Support Stand

    Bel-Art Products

    …added Rigid, solid aluminum rods provide extra support for small lightweight items such as glassware as well as heavy items such as mechanical stirrers. Sturdy polypropylene base provides maximum stability and is stan and chemical resistant. Rods measure 72.5 H x 1.25 D cm (28.5 H x 0.5 D…

  • Stirring Shaft, Glass, 19mm, Precision Ground

    Ace Glass

    …8091,8092,8093,8100 agitators and can be used in all 19mm ID Trubore 8059, 8060, 8061 and 8065 bearings. Compatible with our 8050 mechanical seal and 13445 PTFE Debris-free bearings. Join to stirrer motor using 8124 series chucks. Heavy duty design intended for use with large flasks up to 72 liters.

  • Scienceware® Orbital Shaker Attachments

    Bel-Art Products

    …culture flasks Magnetic stirrer provides the driving force necessary for operation. Magnetic stirrer with a top plate of 6” x 6” is required. Speed control is achieved by setting magnetic stirrer to desired speed. NOTE: manufacturer does not recommend use with heated stirrers.

  • Cimarec i Maxi 5L Stirrer

    Thermo Scientific

    Use stirrers anywhere; can be submerged With powerful magnets and no moving parts, these inductive-drive stirrers are designed to go into water baths and incubators. Standard Telemodul controller features space-saving design. Outstanding mechanical, physical, thermal and chemical…

  • Stirring Shaft, Glass, 19mm, Precision Ground

    Ace Glass

    Precision ground glass stirring shafts, 19mm OD, hollow. Button type shafts accept 8085 blades and can be used in all 19mm ID Trubore 8059, 8060, 8061 and 8065 bearings. Compatible with our 8050 mechanical seal and 13445 PTFE Debris-free bearings. Join to stirrer motor using 8124 series chucks.

  • IKA® Mechanical Accessories - Stands

    IKA Works

    …Provides optimum stability required for larger, heavier instruments and attachments, for example with rheological measurements using overhead stirrers. The stand has an adjustment screw which can be used to compensate for an uneven laboratory table surface. Diameter of support rod: 34 mm …

  • Reaction Assembly, Spherical Flask, 12L thru 72L

    Ace Glass

    Complete reaction assembly available in 12L, 22L, 50L and 72L spherical flask capacities. Unit is complete with heating mantle and controls, mechanical stirrer and controls, pressure equalizing funnel and pilot plant condenser.

  • 2.5-Gallon Capacity Heated Magnetic Stirrer

    Across International

    …that magnetic stirrers can only be used for relatively small (under 4 liters) experiments. They also have difficulty dealing with viscous liquids or thick suspensions. For larger volumes or more viscous liquids, some sort of mechanical stirring is typically needed. Magnetic stirrers are often…

  • Pensky-Martens Closed Cup Flash Tester

    Koehler

    …of hazardous waste samples. Smooth operating cover mechanism slides shutter open and applies test flame at the turn of a knob. Cover fits over brass test cup and includes pilot flame, test flame reference bead, built-in stirrer and plated brass thermometer ferrule. Electrically heated…

  • Stirring Shaft, Glass, 10mm, Precision Ground

    Ace Glass

    …a 45/50 joint and are contoured for use with our 9448 and 9456 series Mini-Lab flasks. Use with Trubore bearings 8036, 8038, 8039, 8040, 8042, 8043, 8047, 8051, 8053 and 8055. Compatible with our 8050 mechanical seal and 13443 collet type bearings. Join to stirrer motor using 8124 series chucks.

  • Precision High-Performance Incubators

    Thermo Scientific

    Mechanical or gravity convection with advanced microprocessor controls ideal for applications requiring excellent temperature distribution or gentle sample heating between 5°C above ambient to 75°C . Uniform heating, precise temperature control and fast drying Blower circulates…

  • Slip Stop 6"X16" Piece

    Dynalon

    … This contributes to safety by reducing breakages and easing stress at the workbench. In laboratories, Slip Stop can be used on shakers and stirrers to hold flasks, test tubes etc. safe and secure without the need for clamps. The mats can also be used to provide added product stability and…

  • EXTRACTION APP/STIR 6WAY 500ML

    Techne (Bibby Scientific US)

    … Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching Three 12.7mm diameter support rods are included Round bottom flask capacity of 500ml at all 6 positions Top cover is…

  • Precision™ High Performance Refrigerated Incubators

    Thermo Scientific

    …are available with mechanical or gravity convection for your most important applications that require excellent temperature distribution or gentle sample heating between 5°C above ambient to 75°C. Choice of Mechanical or Gravity Convection Mechanical convection provides…

  • Bearing, Trubore, Vacuum, 10mm

    Ace Glass

    …applications. Using the graphite-impregnated PTFE packing and ACE Stir-Lube, pressures down to 7 microns have been obtained at 170rpm using only a mechanical pump. Speeds over 1000rpm are not advisable due to heat generated. Indefinite packing life. Frequent tightening of the packing box is…

  • 2.5-Gallon Capacity Digital Heated Magnetic Stirrer

    Across International

    …that magnetic stirrers can only be used for relatively small (under 4 liters) experiments. They also have difficulty dealing with viscous liquids or thick suspensions. For larger volumes or more viscous liquids, some sort of mechanical stirring is typically needed. Magnetic stirrers are often…

  • Saint-Gobain Chemware® PTFE Policeman Stirrers

    Saint Gobain

    …PTFE material Non-stick, easy-to-clean surface Low- and high-temperature resistant Saint-Gobain Chemware® PTFE policeman-style stirrers are ideal for scraping precipitates and residues. A chisel tip on one end and a diagonal cut on other end permits use in confined vessels. Chemically…

  • Stirring Shaft, Glass, Crescent type, 10mm

    Ace Glass

    …Code -19, 3 liter size will fit a 2 liter flask, but closely. Flask opening must be 29/42 or larger. Use with Trubore bearings 8036,8038,8039,8040,8043,8047,8051,8053 and 8055. Compatible with our 8050 mechanical seal and 13443 collet type bearings. Join to stirrer motor using 8124 series chucks.

  • Stirring Shaft, Glass, 19mm, Polished

    Ace Glass

    …and in various lengths. Join 8085 blades to button type shafts, Join 8091,8092,8093 and 8100 agitators to either knob or drilled style shafts. Join all shafts to stirrer motor using 8124 series chucks. Recommended for use with our 8050 mechanical seal, 8067 PTFE and 13445 PTFE Debris-free bearings.

  • FC S Series Flocculators with Independent Positions

    VELP

    The FC S Series is a multiple stirrers with reproducible stirring speeds allowing standard conditions to be met during analysis, a basic requirement in order to obtain reliable and repeatable results. FC S Series is available in two configurations: FC4S, with 4 independent positions FC6S,…

  • Extraction Apparatus

    Electrothermal (Bibby Scientific US)

    …EME30100/CEBX1 Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching Three 12.7mm diameter support rods are included Round bottom flask capacity of 100ml at all 3 positions Top cover is…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.