Stirrers
-
Stirring Shaft, Unground, 9mm
Ace GlassUnground, 9mm OD shaft for use in liquid seal bearings and our debris free 8098 and 8099 stirrer assemblies. Code -25 is a button type shaft which accepts our 8083, 8084, 8085 and 8086 blades. Shaft length accomodates flasks from 500ml to 5000ml.
-
Hei-TORQUE Overhead Stirrers
HeidolphThe Heidolph overhead stirrers of the Hei-TORQUE series are perfectly designed for powerful stirring, in order to achieve best mixing results even for very challenging applications. Hei-TORQUE Value These stirrers are ideal for standard stirring tasks. They are designed to mix and…
-
Stirrer Accessories, Blades
DynalonShaft Stirrers/Blades Unaffected by virtually all chemicals PTFE construction Unbreakable and will not scratch vessels Usable to 260°C Of virgin PTFE, immune to most chemical attacks (except molten alkali metals). Excellent anti-adhesion properties promote thorough…
-
Precision PTFE covered stainless steel stirring shafts, 19mm OD. Drilled type shafts accept 8091,8092,8093,8100 agitators and can be used in 19mm Trubore bearings (8059, 8060, 8061 & 8065). Not recommended for PTFE bearings 8050, 8067 and 13445. Join to stirrer motor using 8124 series chucks.
-
RT2 Advanced Hotplate Stirrers and Accessories
Thermo ScientificRT2 Advanced Hotplate Stirrer Experience precision with our low-profile digital display hotplate stirrer, equipped with PT100 sensor for precise temperature measurements for sensitive experimental procedures. FEATURES Digital control Overheat prevention circuit turns off…
-
Pass-Thru Rod, Flexible shaft
Ace GlassPass-thru rod for use with Caframo 13565 & 13566 stir motors attached to our 8081 flexible stirring shaft.
-
Features: Adjustable safety temperature cut-out: safety cut-out within the 100-580 oC temperature range is adjustable Accurate temperature and speed control: the microprocessor control technology effectively monitors the temperature and speed precision Features of digital models: Heat…
-
Stirring Shaft, Unground, 9mm
Ace GlassUnground, 9mm OD stirring shaft design for use with our 9528 vacuum and debris free stirrer assembly. 380mm straight section, 416mm overall length. Use our 9530-08 blade.
-
10mm Semi-Micro Stirrer Assembly
ChemglassSemi-micro stirrer has a 10mm OD x 440mm long precision ground button style shaft and a 15 x 46mm TFE blade. Lower end of shaft has a reduced diameter to allow passage through a 19/22 outer joint. The 15 x 46mm blade can be used in flasks having a capacity of 100mL and above. Complete stirrer…
-
Stirrer, Polypropylene
DynalonCome in three different configurations -Two fixed blades, U shape blade and Centrifugal blades. The blades are made of chemically resistant polypropylene and are fixed to a PVC covered steel rod with a diameter of 8 mm (approx. 5/16") x 350 mm (approx. 13 3/4") long. Clockwise…
-
RO Magnetic Stirrers
IKA WorksAdjustable reverse operation Wear free magnetic coils Error code display Easy operation with touch keypad Suitable for continuous operation Adjustable speed in increments of 10 rpm Digital magnetic stirrer without heating, designed for synchronous stirring. The magnetic coil…
-
G.K.H. Stir Systems
Glas-ColDesigned to meet mixing requirements for varying viscosities and volumes Feedback circuitry to maintain speed when viscosity changes Reference circuitry to maintain speed even with voltage fluctuations of ±10% Cord connections between drive motors and controls Stirrers filter the drive…
-
Multi Position Stirrers
CorningReliable DC motors Available in 4, 5 and 9 position models Stirs at speeds up to 2,000 rpm Stir up to 9 vessels at the same time with these Multi Position Stirrers. The stirrers' magnets and DC motors provide smooth well-coupled stirring up to 2,000 rpm. The speed of all positions on the units…
-
The MICROSTIRRER is a magnetic stirrer with epoxy painted metal structure that ensures a high resistance to chemical agents. A small, simple and efficient stirrer specially designed for microtitrations. The MICROSTIRRER remains cold even after several days of continuous use, a feature that is…
-
3/8HP Brushless DC motor for use on pilot plant reactors up ²to 200L. May be used with either the 120V or 240V BLDC ²motor controllers. Supplied with 6ft removable cable and ²mounting hardware.
-
5 Pos Proc CPT Stir Comp,230V
Bellco GlassBell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in…
-
Laboratory Shakers/Roller/Rotator & Accessories
Oxford Lab ProductsThe Benchmate orbital shaker is a platform shaker that allows you to shake liquids and semi liquids to 7.5 kg in total weight.It may be used to to mix liquids in bottles, flasks, test tubes, and bowls with a variety of attachments. The Oxford Lab Products Digital tube rotator is ideal for a variety…
-
The state-of-the-art digital multi-position magnetic stirrer with 6 or 15 positions, that remains cold even after several days of continuous use. Reliable & Precise Setting Bright digital display for accurate speed monitoring Exclusive, on-board timer for unattended operation …
-
OBOD/BOD probe power stirrer adapter for MultiLab with input for up to 3 stirrers. Allows connection of multiple OBOD/BOD probes to multi-channel MultiLab instruments.
-
C-MAG HS digital Magnetic Stirrers
IKA WorksMagnetic stirrer with heating and ceramic heating plate which offers excellent chemical resistance. Powerful motor for stirring quantities of up to 10 l (H2O) Simultaneous digital display of target and actual temperatures via LCD dispaly Directly connection for a PT 1000 temperature…
-
Mini Magnetic Stirrer
labForce® (powered by Thomas Scientific)An economical solution made for ultimate function The Mini Magnetic Stirrer by labForce® is an economical solution made for ultimate function with optimal magnetic coupling to ensure dependable stirring efficiency. A powerful magnetic coupling of the high-quality stir bar and the…
-
Mixing Shafts
OaktonShafts are 316 stainless steel. All 3/8" (9.5 mm) dia shafts are machined on one end to accept a 5/16" (8 mm) bore diameter propeller.
-
Short width stainless steel folding impeller assembly for standard bioreactor vessels 8l 316 l stainless steel Ra finish 32 micro inch or better (wxl) 3? x 6"
-
Stirrer, Laboratory, Solid State
Ace GlassTotally enclosed, 1/40hp DC permanent magnet motor with dual 8 mm (5/16") armature and gear shafts with milled flats. Armature shaft with maximum speed of 4000rpm.; 18:1 ratio gear shaft rated 3.6in-lb torque, up to 333rpm. Motor supplied with 1.5 meter 3-wire cable for controller connection.…
-
PTFE Shafts and Propellers
Arrow EngineeringMUST BE ORDERED AS AN ASSEMBLY. A PTFE Propeller must be ordered together with a PTFE Shaft (each purchased separately).
-
Precision ground glass stirring shafts, 19mm OD, hollow. Button type shafts accept 8085 blades and can be used in all 19mm ID Trubore 8059, 8060, 8061 and 8065 bearings. Compatible with our 8050 mechanical seal and 13445 PTFE Debris-free bearings. Join to stirrer motor using 8124 series chucks.
-
Angled Stirrer Blades
ChemglassAgitators are made entirely of PTFE and glass filled PTFE and are for use with 19mm or 25.4mm OD stirrer shaft CG-2097 and are available in 45°, 60° and 90° impeller angles. The 45° and 60° impellers are set up to stir downwards in a clockwise direction and upwards when rotated…
-
Chem-Stir™ 10mm Stirring Shafts
ChemglassEliminates Flask Breakage: PTFE is the only contact in the lower radius of the flask, therefore breakage due to dropping the stirrer shaft has been eliminated. Eliminates the Frustration of Assembly: Unique design permits the proper amount of tension to be applied to the blade,…
-
Agitator, PTFE, Large scale, Turbine
Ace GlassA turbine type agitator, available for 19mm and 28mm shafts. 19mm six blade agitators are open in the center to allow custom positioning on drilled type or knob type 8076, 8078 & 8079 shafts. 28mm four blade agitators are supplied with a PTFE nut & bolt set for securing to 8080 shafts. Shaft is not included.
-
Offset gearbox and motors complete with right angle drive unit for pilot plant systems. Motors with right-angle drive save headspace and work well where height is restricted. Available for standard or hazardous duty applications. Available in either 1/4hp or 1/2hp with a digital 115/230v 50/60Hz…
-
Magstir & Multimagstir Genie Magnetic Stirrers
Scientific IndustriesProgrammable Single position or four position models High/Low speed stirring MagStir Genie is a single position magnetic stirrer. It may be used with any regular flask/beaker or spinner flask and a maximum sample weight of 5.0 kg. MultiMagStir Genie is a multi-position digital…