Stirring Motors

Compare Tool

Select up to 3 products

Stirring Motors
1 - 32 of 125
Sort
View
Show
  • Stirring Motor & Controller, Brushless DC, Pilot Plant

    Ace Glass

    3/8HP Brushless DC motor for use on pilot plant reactors up ²to 200L. May be used with either the 120V or 240V BLDC ²motor controllers. Supplied with 6ft removable cable and ²mounting hardware.

  • Reversing Digital Overhead Stirrer, Model BDC2010

    Caframo

    … Features Clockwise and counterclockwise stirring Timer Stirlight™ Sealed housing Brushless DC motor Digital display Through shaft Electronic digital control Benefits Stirring versatility Repeatability to process Allows monitoring…

  • Stirrer, Model 101, Single Shaft

    Talboys

    Small, economical stirrer, perfect for stirring up to five gallons of water 1/75 HP motor provides a maximum torque of .15 in-lbs Recommended for light duty stirring only Electronic speed control and single shaft motor provide speeds from 500 - 7,500 rpm 1/4” diameter motor shaft

  • Stir-Pak® Dual-Shaft Mixers

    Oakton

    …control Two motor axles give you two mixers in one! The direct-drive axle provides high-speed, low-viscosity mixing; switch to the gear-reduction axle for your low-speed, high-viscosity mixing needs. Rugged, permanent-magnet, totally enclosed nonventilated (TENV) motor has permanently…

  • Stir-Pak® Heavy-Duty Mixers

    Oakton

    …Note: High-torque models include keyless chuck. Low-torque models include collet. Mixer Heads Heads feature a TENV, permanent-magnet DC motor with permanently lubricated ball bearing construction. Choose from four models depending on your desired speed and torque ranges. All mixer heads…

  • Corning Scholar™ 171 Magnetic Stirrer

    Corning

    Economical Compact design Stirring range: 100-1600 rpm Rugged construction The unit’s 5” x 5” top size saves valuable bench space. Alternating current motor and strong magnet provide longer life and vigorous stirring. Top is constructed of plastic. Stirrer has a one-year…

  • LS Overhead Stirrers

    VELP

    …technopolymer structure ensures optimum chemical resistance and enhanced handling, preventing any possible rust and being extremely light. The robust motor ensures years of continuous operation, with no extra costs for maintenance. Easy, quick set-up and slim casting, with minimum requirements in…

  • Stirring Shaft, Glass, 19mm, Polished

    Ace Glass

    Polished glass stirring shafts, 19mm OD. Available in solid and hollow styles and in various lengths. Join 8085 blades to button type shafts, Join 8091,8092,8093 and 8100 agitators to either knob or drilled style shafts. Join all shafts to stirrer motor using 8124 series chucks. Recommended for use…

  • Digital Stir-Testers

    Glas-Col

    …permanent magnet DC motor Direct-drive, with rpm/torque readout and X-Y output Maximum rpm: 2,500 Torque: 1.5 lbs.-in. (1.73 kg-cm) Direct drive provides 20 to 2,500 rpm and 1.5 lb.-in. torque. Available for 120 or 240 V, 50/60 Hz operation. Includes drive motor, mounting bracket, controller,…

  • Air-Driven Stirrers

    Arrow Engineering

    …200 to 10,000 rpm Compact and quiet; operates on compressed air at pressures from 30 to 100 psi (210 to 690 kPa) Sturdy, smooth-running motor develops 1/6 hp (120 W) at 80 psi (550 kPa) input Speed is variable by adjustment of valve which controls air intake Air inlet is 11 mm long…

  • Hei-TORQUE Overhead Stirrers

    Heidolph

    …ease of operation Constant speed even under changing loads Safe start and stop of operation via slide touch panel to avoid unintended stirring Newest motor generation for maximum power at minimum noise level Hei-TORQUE Precision These stirrers are ideal for demanding tasks which…

  • Stir-Pak® General-Purpose Mixers

    Oakton

    …Speed ramps to set speed. Brushed DC motor has a compact speed controller integrated by a custom anodized aluminum potentiometer, which controls both on/off and variable-speed settings for single-direction mixing. LED light indicates when motor is turned on, or when an overload, over-temperature…

  • LCD & LED Digital Overhead Stirrers & Accessories

    Scilogex

    …Stirrer Features: Analog speed control is displayed on the LED display High torque for viscous medium stirring Over torque protection automatically stops the motor A through-shaft design allows for easy adjustment of the impeller position Large chuck diameter for many shaft…

  • Stirring Shaft Coupling

    Ace Glass

    …metal stir shafts to the adjustable chuck on an overhead stir motor. Compression connection is secured to various OD shafts via an Allen screw coupling. The Codes -22 and -24 are complete pass-thru assemblies that enable height adjustment on stir shafts when using overhead stir motors with pass-thru…

  • G.K.H. Stir Systems

    Glas-Col

    …drive motors and controls Stirrers filter the drive current to eliminate the pulsing action common with unfiltered DC current. The filtering also reduces motor heating and allows the use of a smaller motor for the same power rating; ensures smooth rotation for precise stirring; lengthens motor

  • Stir-Pak® and Servodyne™ Mixer Accessories

    Oakton

    …or use with tank clamp 04552-65 Replacement collet set including nut and key Replacement keyless chucks, include adapter and key Replacement motor brush set (set of two brushes) Heavy-duty clamp holds rods up to 1-1/8" dia. Made of SS with chemical-resistant epoxy coating.

  • Flexible Stirring Shaft, Isolate the Stir Motor

    Ace Glass

    …for use with 8mm (5/16in) motor shaft. Purchase the optional code -27 adapter for motors with 9.5mm (3/8in) shafts. Reactor end consists of a detachable, hand-held or clamped handpiece with a 1/4in collet and 8mm pin adapter for use with our 8124 family of stirring shaft chucks. Order separately…

  • Offset Stir Motor & Gearbox, Standard and Hazard Duty

    Ace Glass

    Offset gearbox and motors complete with right angle drive unit for pilot plant systems. Motors with right-angle drive save headspace and work well where height is restricted. Available for standard or hazardous duty applications. Available in either 1/4hp or 1/2hp with a digital 115/230v 50/60Hz…

  • Stirring Motor/Controller, Digital, Hazmat Series

    Ace Glass

    Motor, AC variable, hazardous duty, 1/2hp,230/460v 60Hz²3 phase, complete with controller, 115v 50/60Hz input, CE and ²cULus rated. Control box cord to motor is 12ft long, control²box cord to electrial source is 24ft long.

  • Stir Shaft, Retreat Agitator, PTFE

    Ace Glass

    PTFE covered stainless steel shaft with a solid PTFE retreat curve agitator. Featuring a retreat angle of 30 degrees and, for a better grip by the stir motor chuck,50mm of exposed stainless.

  • Stirring Shaft, PTFE Coated Glass, 10mm

    Ace Glass

    …permits higher stirring speeds with Trubore bearings. If used unlubricated, 500 rpm max with water-cooled 8040 bearing. Compatible with 8036, 8038, 8039, 8043, 8047, 8051, 8055 and 13443 bearings. Button type shafts accept 8083, 8085, 8086, 8087 and 8096 stir baldes. Join to stirrer motor using 8124…

  • Stirring Shaft, Glass, Polished, 10mm

    Ace Glass

    Polished glass stirring shafts, 10mm OD. Recommended for use with only our 8050,8066,13443 and 13445 bearings. Join 8083,8085,8086,8087,8096 blades to button type shafts. Join 8088, 8089, 8090 & 8091 agitators to bead type shafts. Plain shafts will accept 8094 & 8095 agitators secured with a…

  • Stir Shaft, 4 Blade Propeller, PTFE

    Ace Glass

    PTFE covered stainless steel shaft with solid PTFE, 4 blade screw propeller. Blades are pitched 45 degrees. For a better grip by the stir motor chuck, 50mm of stainless is left exposed.

  • Motor Controller, Solid State

    Ace Glass

    …such as rheostat or transformer. AC output: 120 volts, 10 amps. DC motors give better all- around performance than most other solid state controllers because rectification is balanced full-wave instead of half-wave power. DC output: 0-120 volts, 6 amps. Features top Fwd-Off-Rev. motor switch.

  • Stirring Shaft, Hollow Glass, 5mm, Precision Ground

    Ace Glass

    …hollow, 5mm glass stirring shaft. Button type shaft accepts 9542 blades and can be used in matching 9524 and 9527 bearings. Holes are provided in the side of the shaft for material introduction and at the bottom for emission into the flask contents. Join to stirrer motor using 8124 series chucks.

  • Stirring Shaft, Glass, 10mm, Precision Ground

    Ace Glass

    Precision ground glass stirring shaft, 10mm OD, attached vanes. Vanes will fit through a 45/50 joint and are contoured for use with our 9448 and 9456 series Mini-Lab flasks. Use with Trubore bearings 8036, 8038, 8039, 8040, 8042, 8043, 8047, 8051, 8053 and 8055. Compatible with our 8050 mechanical…

  • Stirring Shaft, Glass, 19mm, Precision Ground

    Ace Glass

    Precision ground glass stirring shafts, 19mm OD, hollow. Button type shafts accept 8085 blades and can be used in all 19mm ID Trubore 8059, 8060, 8061 and 8065 bearings. Compatible with our 8050 mechanical seal and 13445 PTFE Debris-free bearings. Join to stirrer motor using 8124 series chucks.

  • Stirring Shaft, PTFE covered stainless, 19mm, Precision

    Ace Glass

    Precision PTFE covered stainless steel stirring shafts, 19mm OD. Drilled type shafts accept 8091,8092,8093,8100 agitators and can be used in 19mm Trubore bearings (8059, 8060, 8061 & 8065). Not recommended for PTFE bearings 8050, 8067 and 13445. Join to stirrer motor using 8124 series chucks.

  • Stirring Shaft, Glass, 19mm, Precision Ground

    Ace Glass

    …ground glass stirring shafts, 19mm OD, hollow, heavy duty. Knob type shafts accept 8091,8092,8093,8100 agitators and can be used in all 19mm ID Trubore 8059, 8060, 8061 and 8065 bearings. Compatible with our 8050 mechanical seal and 13445 PTFE Debris-free bearings. Join to stirrer motor using 8124…

  • Stirring Shaft, 10mm, Precision Ground Glass

    Ace Glass

    Precision ground glass stirring shafts, 10mm OD, paddled, button type and bead type. Button type shafts accept 8083, 8085, 8086, 8087 & 8096 stir blades. Beaded shafts accept 8088, 8089, 8090 & 8091 agitators. Use with Trubore bearings 8036, 8038, 8039, 8040, 8042, 8043, 8047, 8051, 8053 & 8055. Use…

  • Stirring Shaft, Glass, Crescent type, 10mm

    Ace Glass

    Precision ground glass stirring shafts,10mm OD, crescent type. Useful for stirring viscous materials at low rpm. Available for round bottom flasks of 1, 3 and 5 liters. Code -19, 3 liter size will fit a 2 liter flask, but closely. Flask opening must be 29/42 or larger. Use with Trubore bearings…

  • Stirring Shaft, Precision Ground, Gas Dispersion, 10mm

    Ace Glass

    Precision ground glass stirring shaft with attached vanes, 10mm. For use when agitation and gas introduction are desired at the same time. Agitator will fit through a 45/50 joint. Designed for use with our 9523 Trubore bearing and 9443 or 9446 mini-lab flask heads. Introduced gas exits the hollow…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.