Made of cast iron aluminum, these lab clamps are ideal for many applications on the bench or latticework. Heavy-duty 90 degree clamp designed to be more user friendly Larger knobs make hand tightening easier and provide sufficient pressure to hold rods securely Can be used on…

Cast iron ring with black enamel finish. Detachable zinc plated legs. Legs are interchangeable, features removeable rings with 3.5", 4.75", 6.5" Ring O.D., 9" Height.

One piece pinchcocks molded of autoclavable white polycarbonate Release by thumb pressure 2848W26 Mini Clamp is single position on-off clamp; for use with thin-wall tubing less than 3/16” o.d. 2848W30 Clamp is 15-position ratchet- type for one-hand, stepwise flow control…

Heavy Duty Bosshead, Chrome Plated, Fits Rods up to 20mm Diameter Heavy duty bosshead Die casted alloy with chrome plated  or black finish Accepts rods measuring up to 20mm in diameter Large thumb screws and grooved knobs for easy adjustments (1) Boss head This…

Stainless steel electro-polished finish or nickel-plated zinc construction. Double Buret Clamp holds any size buret from micro to 100mL capacity. Simply compress the scissor-like mechanism, insert buret and gently release to grip. Numbers and graduation on buret remain easy to read. For height…

With heavy, rectangular base of plate steel, finished in hard enamel Zinc-plated steel rod is machined at lower end with U.S. National coarse thread 508 mm rod is 9.5 mm in diameter with 3/8-16 thread; 610 and 914 mm, 13 mm in diameter with 1/2-13 thread 8835B50 support is furnished…

These stands have nickel-plated rods, and heavy, corrosion-resistant bases for stability. They come as a set with support rings included. Stamped Steel Base #4-SSS66-R2 : Base [4" x 6"], Rod [18" x 5/16"], 2 Rings [diameter 3", 4"] #4-SSS67-R3 :…

For anchoring of 1/2" lattice frame.

3-Prong Univeral Clamp with Extra Large Bosshead INDUSTRIAL QUALITY High performance, die casted metal retort clamp, suitable for holding irregular shaped items. The clamp features three, vinyl coated prongs that are specifically designed for maximum traction and grip DOUBLE…

Double Burrete Clamp Support with Rod and Stand. Alloy jaws are suitable for all burettes up to 100mL. Cast iron blue base measuring 7" wide and 13" long. 12mm diameter stainless steel support rod measuring 24" long. Great for any science or home laboratory. Double Burrete Clamp Support with…

Support Jack provide for stable height adjustment and support for items in the lab such as flasks, baths or hot plate stirrers. Top and bottom plates are constructed of stainless steel while the support mechanism is made of chrome plated steel.

Aldrich benchclamp clamps have a nickel-plated finish and are corrosion resistant. The clamps come with slip-on fiberglass finger covers. The Grippy Knob design has a round nut which is easy to turn making tightening the clamps around glassware fast and convenient. Synonyms: bench clamps …

1/2" diameter rod can swing on one plane 22 1/2 degrees in each direction

150°C Max. Temp. Limit for Filter Base. 

HIGH QUALITY Rod made of high quality steel STABILITY   Provides superb stability for experiments & setups THREADED Threaded end (10 x 1.5mm) fits in all Eisco bases GREAT FOR CLASSROOM & HOME LABORATORIES The durable and sturdy construction of this set makes it an…

Heidolph RZR 1 overhead stirrer with tools and accessories features 2 gears delivering 280 to 2200rpm with analog control. 115v 60Hz input motor is high torque, up to 100Ncm. Use code -32 stir shaft for slow speed, up to 250rpm and code -34 shaft for speeds up to 2200rpm. Universal stand and clamp…

Thermometer Clamp, Synthware, Extension Rod Diameter: 10mm, Overall length: 200mm.

Test tube clamp for all sizes of test tubes. Available with and without finger grips in both Brass Wire and Steel wire with a brass finish. Note: Wooden test tube holder can accommodate test tubes from 12mm to 25mm in diameter.

DIE CAST ALLOY Die cast alloy construction is strong and corrosion-resistant WIDE JAWS 3-finger jaws on clamp open to 3.5” (90mm) wide for holding a wide range of glassware sizes and volumes PVC COATED PRONGS PVC-coated prongs provide a strong, slip-free hold that won’t scratch objects.…

Rugged stainless steel deck and lift mechanism for long life in corrosive environments Ideal for use in fume hoods, solution-baths, marine and industrial laboratories Support miniflasks, jars, columns, large baths, magnetic stirrers, heaters and more Resistant to sanitizing…

A cast iron clamp with nickel plated steel set screws. Sold individually. Available in the following sizes: 2" OD 3" OD 4" OD 5" OD 6" OD

KF/NW25 aluminum wing nut flange quick clamp. Compatible with the following products from Across International AccuTemp series vacuum ovens AI 9.5, 11.3, 13.5 cfm Edwards RV8, E2M28 and nXDS vacuum pumps TF series vacuum tube furnaces with KF25 connections GC2 and GC3 vacuum…

With rack on shank for breaking off single or double strength glass, extra large natural diamond for durability.

Clamp Bosshead, Synthware, For rods up to 15mm diameter, chrome plated finishwith plastic headed screws.

3 Prong Adjustable Universal Clamp with a 10" overall length and 0.375 diameter rod Perfect for holding both regular and irregular shaped glassware Accommodates objects up to 2.5" Adjustable thumb screws on both sides allows for a wider range of accommodation Non-slip vinyl coated rubber prongs…

Clamps are die casted from aluminum and feature black rubber sleeves for firm gripping of burettes.  The adjustable clamps hold up to 30mm OD burettes which are held in place by the pressure created by the springs.  For use with rods up to 19mm diameter.

This cast-aluminum double burette clamp can attach to a support stand and hold up to two burettes securely. It has rubber grips to improve the grip on the burettes. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene and lead, which are known to the…

SUPPORT BASES, RECTANGULAR SHAPED Base is made of cast iron with a black baked finish. Dimensions are 140 x 200mm. Base has two holes, one centered and one at the end of the short side. Rod is 10mm O.D. x 600mm (24”) in height. Total assembled weight is 1Kg. SUBLIMATION APPARATUS,Two-piece…

CLAMPS, BURET, Clamp will hold two burets from micro to 100mL. Spring loaded mechanism adjusts simply by squeezing, yet hold buret firmly in place. Mounts directly to standard support rod with built in hook connector. Constructed of epoxy coated aluminum with vinyl jaws. CHEMGLASS LAB CLAMPS,…

Ring and rod are integrated with boss head clamp Boss head clamps rods up to 5/8" in diameter with metal thumb screw

Flow control adapter for use with CG-1198 and CG-1199 chromatography columns along with CG-1200 reservoir. Adapter has a 0-4mm Chem-Cap® metering plug.

With a full 360° jaw rotation, this fully adjustable clamp is ideal for attaching to rods up to 3/4" (19mm) in diameter. The clamp has an aluminum muff with steel thumbscrew and phosphor bronze jaws. The maximum distance from the jaw to the muff is 4-3/8" (111mm) and the overall length is 5-1/2" (140mm).