Cast iron ring with black enamel finish. Detachable zinc plated legs. Legs are interchangeable, features removeable rings with 3.5", 4.75", 6.5" Ring O.D., 9" Height.

These support stands feature a heavy cast iron base with black enamel finish. Each base includes a removable zinc plated rod.

Strong, excellent quality laboratory support jack, made of aluminum and stainless steel. Vertical height to 26cm;15cm x 12cm top and base plates. Also available with removable 20cm x 20cm platform and a 45cm long support rod.

Connect this clamp to any support rod and set up to three separate pendulum demonstrations. Includes individual cord clamps.

Thermometer Clamp features adjustable 360° rotating jaw for suspending thermometers. The clamp attaches to rods up to 13mm (1/2") O.D.

Cast iron ring with black enamel finish. Detachable zinc plated legs. Legs are interchangeable.

Self closing brass test tube clamp with finger grips and without finger grips

Excellent for holding small objects, The jaws on these burette clamps open from 15mm to 45mm (0.5" to 1.75"). The clamp attaches to rods up to 13mm (0.5"). O.D. Jaws can be rotated and locked at any angle. Available with the jaws coated or uncoated.

Chrome plated steel double clamp. Accepts rods up to 0.75" (19mm) in diameter. One clamp can be rotated 360° about long axis and clamped in any position.

These clamps are molded in polypropylene, making them completely corrosion proof. The spring loaded jack in the middle provides a vice-like grip to the burette and prevents in from slipping. Two tapered wedges are provided to ensure firm grip on the rods having diameter 0.5" or3/8".…

Clamps are die casted from aluminum and feature black rubber sleeves for firm gripping of burettes.  The adjustable clamps hold up to 30mm OD burettes which are held in place by the pressure created by the springs.  For use with rods up to 19mm diameter.

Suspend two funnels simultaneously using this polypropylene holder. These corrosion-resistant holders can be used with 3" to 6" diameter funnels, and include an extra plate to accommodate 1" to 3" diameter funnels. Two tapered wedges are provided to ensure firm grip on rods measuring 1/2" or 3/8" diameter.

Cast aluminum clamp holder for use with rods up to 19mm in diameter. For use when clamping at 90° is required. This clamp features a min to max grip range of 0-21mm and a v-grove bearing length of 55mm.

Hook Collar clamps are ideal for suspending pulleys, balances, etc from support rods or cross members. Available for rods up to 0.5" or 0.75".

3 pronged extension clamp is 10" long and has rubber tubing covering the prongs Extention Clamp with cork covered jaws, 8" total length 3 Pronged clamp with aluminum rod, 10" long

This apparatus is useful for holding objects that are too large for standard clamps, such as glass distillation columns and odd shaped glassware. Chain and support band are made of strong chrome-plated brass, and support rod is constructed of stainless steel. Chain is 21” long and can be adjusted…

Each set contains a stamped steel base and rod along with 2, 3, 4, or 5 cast iron rings with clamps. Sets are shipped in specially designed boxes.

This Lattice Lab System features an assortment of aluminum rods frup to 72" long.  Assembly is easy and requres only a screwdriver.  Support rods are made of hard aluminum and foot plates and hook connectors are made of cast alloy.  Please note: must be shipped by motor…

Clamp features vinyl coated three pronged jaws that open to 2.25" wide. Includes fiberglass sleeves and a clamp holder that can be rotated 360°.

Clamp with Hook can be rotated and locked in any position. Ideal for supporting suspended thermometers, drying tubes, etc. The clamp attaches to rods up to 13mm (1/2") O.D.

Laboratory support jacks are constructed of chemically resistant anodized aluminum and stainless steel. The scissor jack design enables height adjustment with a simple turn of the knob. LBJK44 has a 4" x 4" platform that can be vertically adjusted fro

Heavy cast iron triangular bases with black enamel finish include a zinc plated steel rod.

This line of 3-prong extenstion clamps are constructed of pressure die casted zinc alloy and are chrome plated. Clamps open to about 3", have a recommended maximum grip size of about 2.25", and feature double keyed spring-type adjustment screws. Available with an extension rod 8.25"…

Test tube clamp for all sizes of test tubes. Available with and without finger grips in both Brass Wire and Steel wire with a brass finish. Note: Wooden test tube holder can accommodate test tubes from 12mm to 25mm in diameter.

Mohr's Pinchcock tubing Clamp is made of steel wire and nickel plated. Available for tubing diameters of 10mm, 13mm, and 16mm.

Made of steel wire, zinc plated. Stand has a heavy wire gauze top. Overall height is 5" to accommodate all sizes of burners. Available with or without a ceramic center on wire gauze top.

These support stands with rods come complete with a stamped steel base with black enamel finish and a removeable zinc plated steel rod.

The A-shaped base is made of rugged cast iron for extra stability. It has 22cm long legs and features a baked on black chemical resistant finish. The rod is zinc plated steel, 61cm long and 12mm in diameter.

This deluxe set includes a support stand (5” x 8”) with support rod (20”), support ring (3”), a 2-prong extension clamp with cork lined jaws and a clamp holder. The support rod includes a 3” long rod to provide more torque when securing the rod to the base plate.

Molded in Polypropylene, this flask stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point of contact. This flask stand can hold round bottom flasks up to 10,000ml capacity. This stackable flask stand can also be autoclaved.

This Lattice Lab System features an assortment of aluminum rods from 18" to 48" long.  Assembly is easy and requres only a screwdriver.  Support rods are made of hard aluminum and foot plates and hook connectors are made of cast alloy.  Please note: must be shipped by motor…

These stamped steel bases feature 2 tapped holes for the rods. Hole at the center of the shorter side is for standard ring stand use. Hole at the center of the longer side is for titrations, specific gravity determinations, etc. Each base includes a zinc plated steel rod.