SP Bel-Art, Supplies
-
Sterileware® Long Handle Sampling Spoons
SP Bel-ArtDesigned to gather small amounts of sample material, especially in hard to reach containers. Long handle reaches into jars, bottles and other confined areas Minimizes the potential of personal contact with sampled material Sterile, FDA grade polystyrene safe for food, drug and…
-
Scienceware® Screw Cap Jars
SP Bel-ArtWhite Polypropylene Available in an assortment of sizes FDA approved Excellent for storing liquid or dry stock Can be used for samples Jars are autoclavable at 121°C (250°F) Caps have PE foam lining and are not autoclavable
-
Scienceware® Stack Rack® Test Tube Racks
SP Bel-ArtMatch Rack Material to Lab Use These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121°C (250°F). …
-
Sterileware Upright Handle Dippers / Ladles
SP Bel-ArtAvailable in blue or white to allow for effective sample contrast, these sterile ladles are useful for sampling liquids and creams. Upright handle allows for sampling from above container Curved handle end provides secure withdrawal of sample Fits into 2” openings such as a 45-gallon…
-
Scienceware® Polypropylene Micro Funnels
SP Bel-ArtPerfect for micro work, filling burettes, manometers and small bottles. Polypropylene plastic Steam autoclavable at 121°C (250°F)
-
Sterileware Flat Bottom Scoop
SP Bel-ArtThese sterile scoops are used by pharmaceutical, food, cosmetic and chemical companies for general production or laboratory work. Handle bump acts as thumb rest to help keep the hand away from the scoop; reduces contamination risks Flat bottom allows for use as a weigh boat Approximate…
-
Scienceware® Tubing Clamps
SP Bel-ArtScrew Clamp Offers on/off and fine control so accurate it replaces stopcocks in many applications Can be installed without disconnecting tubing Molded of Delrin® plastic Clamp is autoclavable and resistant to acids, alkalis and organic solvents Accepts flexible tubing up to 14mm…
-
Right-to-Know Safety-Labeled Wash Bottles feature a wide mouth 53mm (2") for easy refilling. Bottles are pre-printed with the Chemical name and formula, the National Fire Protection Association (NFPA) Section 704 Four-color Diamond, health hazards, Chemical Abstract System (CAS) number, and…
-
Poxygrid® "Half-Size" Test Tube Racks
SP Bel-ArtExcellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy …
-
These autoclavable/disposable plastic pestles are excellent for re-suspending bacterial cells, precipitates of nucleic acids or proteins and pellets of other materials. Supplied with 1.5mL microcentrifuge tubes of the same shape for optimal grinding Length: 8.5cm (3½") …
-
Scienceware® Pipet Controller, Vinyl
SP Bel-ArtEconomical pipet controller provides a safe and easy alternative to mouth pipetting Tapered polyethylene chuck allows for quick removal when pipet is filled
-
Six different, small size, double-ended tools (150mm long) and a pair of tweezers (145mm long) suit small sample handling needs. Each double-ended tool has two different end shapes providing 12 implements to better match user needs. Two small spoons ends for transferring and collecting both…
-
Scienceware® Stainless Steel Spoons
SP Bel-ArtDouble-Ended with Two Bowl Sizes These double-ended, 304 stainless steel sampling spoons have a solid, rounded shaft. Available in plain polished stainless steel or coated with Fluo-Kem® Teflon® FEP FEP complies with FDA regulations governing direct food contact applications
-
Scienceware® Floating Centrifuge Tube Racks
SP Bel-ArtAllows Superior Temperature Control of Samples Open style floating rack provides tubes with maximum contact with the water and better circulation of the water bath around the tubes, allowing superior temperature control of samples. Work on the benchtop, float in the water bath …
-
Scienceware® Pinch Valves
SP Bel-ArtControl Fluid Flow without Drips Pinch valve allows control of fluid flow without drips. Squeeze soft silicone body to permit flow Release pressure to suspend flow Withstands approximately 16 lbs. of pressure Made of Teflon®, stainless steel and polypropylene for maximum…
-
Eyeware Dispenser
SP Bel-ArtKeep Safety Glasses within Reach. Holds boxed or loose glasses. Features large flip-up door for removing glasses and open top for easy filling. Made from clear acrylic. Predrilled holes on back for wall mounting (hardware not included). Overall dimensions: 483 x 203 x 102mm (19" x 8" x 4")
-
Labeled with bold, eye-catching letters for safe and positive identification of common laboratory solutions Standard diamond alert symbols indicate the type of hazards the contents may present; CAS numbers are included where appropriate Permanent, colorful silk-screened labels put an end to…
-
Scienceware® Holdfast Graduated Cylinders
SP Bel-ArtMakes pouring liquids from large cylinders into other vessels easier Polypropylene-molded cylinders have a double scale with raised numerical graduations for easy reading Hexagonal base makes the cylinder stable and roll proof Chemically resistant and steam autoclavable at 250°F (121°C) Hand…
-
Wide Mouth Wash Bottles
SP Bel-ArtLow-density polyethylene wash bottles have color-coded polypropylene closures for easy identification and wide mouths for easy filling. Choose from: Natural, Red, Yellow, Blue, and Green in 250, 500 or 1,000mL Natural also available in 125mL
-
Polygon Spinbar® Magnetic Stirring Bars
SP Bel-ArtThese stirbars have polygon multifaceted surfaces that add turbulence relative to similar smooth size cylindrical bars. Center molded pivot ring minimizes the contact area between the bar and the vessel; reduces friction and chattering Marring of plastic containers is diminished …
-
Buttress Cap Bottles
SP Bel-ArtLow density buttress screw caps Polyethylene PE caps have 38/430 finish.
-
Scienceware® Spinbar® Restrainer
SP Bel-ArtHolds on to magnetic stirring bar Easily retrieve magnetic stirring bars from vessels with the handheld Spinbar® Restrainer. Don’t lose magnetic stir bars down lab drains and eliminate the splashing hazard when pouring out of mixing containers. The tool fits comfortably…
-
Sterileware® Sampling Spatulas
SP Bel-ArtThese V-shaped spatulas are ideal for every type of powdered or granulated material. Sterileware Spatulas (9” and 14”) are made of high-impact polystyrene, individually packaged, sterilized by gamma irradiation, lot stamped, and shipped with a Certificate of Processing. Non-sterile…
-
Bel-Art Automatic Burets
SP Bel-ArtAutomatic self-zeroing glass buret ensures non-contamination Easy-to-read blue graduations against a white background 10 mL buret readable to 0.05 mL; other burets readable to 0.1 mL Delivery end fitted into plastic push-button stopcock permitting drop-by-drop delivery Small screw…
-
Scienceware® Quick Disconnects
SP Bel-ArtConnect same or different size tubing with these polyethylene plastic connectors. Ideal for vacuum applications, water lines, manometers, and more 1226C59 & 9583M13 (F19730 series) connects same size tubing 9583M43 (F19731-0552) connects different size tubing
-
Precisionware® Wide Mouth HDPE Bottles
SP Bel-ArtRigid high-density polyethylene, laboratory/pharmaceutical grade bottles have matched polypropylene closures and leakproof design. FDA compliant material Wide mouth design simplifies packaging and storing of liquids and powders Bottles 250ml (8oz) and larger feature recycling code molded…
-
Polyethylene Carboy Bottles with Spigots
SP Bel-ArtThese carboys have a screw in dispensing spigot that can be replaced with a plug (included) when the vessels are used for long-term storage. Heavy knurling on the cap provides excellent grip for opening and closing. The smooth sides accept adhesive labels and can be marked with most indelible…
-
Lessen environmental impact with these PLA (polylactic acid) resin sampling sticks. The production of 100% plant-based PLA contributes less greenhouse gasses and uses less nonrenewable energy from source to resin than its petroleum-based counterparts, and the plants used are an annually renewable…
-
Scienceware® Radioactive Indicator Dots
SP Bel-Art1,000 dots supplied on a tape roll Color-coding complies with OSHA regulations Dots are 1/4” (6.35 mm) in diameter with the radiation symbol on a yellow background. Stick on polypropylene microcentrifuge tubes for quick identification of “hot” tubes.
-
One Reservoir, Three Layouts Ideal for use when filling multi-tube blocks or microwell plates, this two-sided polypropylene reservoir is actually three reservoirs in one. Graduated single reagent reservoir with graduations at 10, 25, 40 and 50ml is on one side One reservoir with 8…
-
Scienceware® No-Wire™ Test Tube Racks
SP Bel-ArtGreat alternative to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions…
-
Scienceware® Vacuum Aspirator Bottle
SP Bel-ArtThe Vacuum Bottle Trap is a useful tool for easy and continuous liquid aspiration with vacuum when aspirating tissue culture media, wash solutions, supernatant fluids after centrifugation, chemical waste, etc. The Aspirator Bottle safely retains up to 1600 mL (54 oz) of fluids while the…
![Site Search powered by SLI Systems](http://assets.resultspage.com/logos/sli_logo_2014.png)