Vacuum Aspirator

…easy and continuous aseptic vacuum aspiration of a variety of liquids, including tissue culture media, supernatants, and chemical wastes. To use, simply insert a pipette tip, Pasteur pipette or serological pipette into the collection tube and connect vacuum line to vacuum source. Chemical…

The Accuris ASPIRE Laboratory Aspirator incorporates a quiet, maintenance-free pump inside a sturdy, yet compact base. The vacuum is fully adjustable, with a pressure gauge that displays the vacuum level, allowing full control of aspirating speed. The ASPIRE is an ideal choice for a wide range of…

…portable system is ideal for vacuum aspiration of a variety of liquids, including tissue culture media, supernatants, and chemical wastes and is available with the original strength or HiFlow pump. Self-contained system with 1.0 gallon bottle, tubing and vacuum pump is lightweight, compact…

…ergonomic, hand-held aspirator can be used with Pasteur pipettes, plastic aspiration pipettes or a variety of adapters for specific applications. A pressure-sensitive button on the top of the unit controls the specific amount of vacuum applied. This prevents the accidental aspiration of cells or…

The Vacuum Bottle Trap is a useful tool for easy and continuous liquid aspiration with vacuum when aspirating tissue culture media, wash solutions, supernatant fluids after centrifugation, chemical waste, etc. The Aspirator Bottle safely retains up to 1600 mL (54 oz) of fluids while the…

…most advanced vacuum trap system. Ideal for protection of vacuum lines and scientists alike, Vactrap safely contains waste from supernatant removal, chemical separation, and cell or tissue culture media aspiration. Best of all, Vactrap comes ready to use--simply attach to your vacuum and begin your…

…including bottle top aspirating filter units, plastic vacuum bottles, glass Erlenmeyer flasks, or any device that accepts vacuum. The rechargeable lithium ion battery allows for use where an inline vacuum source is not available, outside of the laboratory setting where a vacuum is required, or when…

… The use of an aspirator is preferential to using a generic laboratory vacuum line as it restricts the possibility of contamination and can be used exactly where the operator is located i.e. no need for a dedicated position in the laboratory to perform the aspirator. Applications :…

…with hydrophobic microbiological filter Vacuum pressure: -200 to -800mbar (adjustable) Overflow protection - liquid level sensor detects excess liquid and prevents overflow The use of an aspirator is preferential to using a generic laboratory vacuum line as it restricts the possibility of…

High-density polyethylene aspirator pump operates on water pressure above 11psi (7584 N/m2). Integral check valve resists corrosive filtrates and fumes Quick-disconnect hose fitting accepts 6.4 to 9.5mm (1/4 to 3/8") I.D. tubing Male thread faucet connection is 9.5mm (3/8")…

Sterile aspirating pipettes are completely transparent and designed for the transfer and mixing of liquids. They are also used in a wide variety of applications such as vacuum or pipettor aspirating procedures. Material: Polystyrene (PS) Transparent, no graduation marks Non-plugged …

…Aspiration System Comfort and flexibility Quiet operation – motor starts only when vacuum pressure drops Compact design and small footprint allows for efficient use of space in laminar flow cabinets Adjustable aspiration speed allows for quick aspiration …

Our PVC deluxe vacuum pressure bulb is ideal for gas aspirating duties. Length: 111mm without valves; diameter 57mm.

Humboldt Aspirator Filter Pumps offer excellent performance for vacuum filtrations under both high and low water pressure conditions. The pumps feature a ball-type, positive-action valve in the suction tube which prevents water backflow if the pressure is reduced.

The Costar® Aspirator is a device using vacuum to safely and aseptically dispose of supernatant from a variety of laboratory vessels. Includes a hand piece to which disposable pipet tips are attached during use Grommet for accessory attachment and single-channel adapter for disposable…

…Adjustable Vacuum / Pressure Use these affordable oil-free pumps to provide convenient vacuum throughout the lab. Welch WOB-L piston pumps provide adjustable vacuum for filtration, SPE, vacuum ovens, and more. These pumps are an efficient alternative to water aspirators. Select vacuum range…

… Replace water aspirator Aspiration Degassing Vacuum drying Fume suction The PILOT3000 is equipped with a 1/7 hp motor and provides a maximum 20 L/min (115V/60Hz) of free air displacement and 22 in-Hg of maximum vacuum. The pump features a vacuum regulator with gauge…

…aspirating aqueous solutions including buffers but are not recommended for acidic, basic or organic vapors and gases. 1233K55 features a high flow (34 lpm), WOB-L piston pump. Vaccum is 27.2 Hg (70 Torr) and the unit has a 115V, 60 Hz power requirement. 1233K56 features a 28 lpm capacity, vacuum…

This is an 8-channel adapter that fits on the Costar® Aspirator (No. 4930) so that it can be used to remove media and solutions from 8 wells simultaneously on a 96 well plate.

Costar® aspirating pipets are sterile, without graduations and unplugged for aseptically aspirating liquid by using vacuum suction. Features: One piece polystyrene construction Sterile and certified nonpyrogenic

The Vacu/Trol Water-Aspirator efficiently generates full vacuum with standard laboratory faucets (10 liters of air to Length: 24.15 cm (9.51 in.); Weight: 315 g

Works best between 10 to 28 in. Hg Prevents back pressure with aspirator-type vacuum pumps Made of high-density polyethylene with gum rubber flap Serrated connectors on inlet and outlet take 1/4- to 5/16-inch-bore tubing Useful for vacuum systems Not for use with liquids

Costar® aspirating pipets are sterile, without graduations and unplugged for aseptically aspirating liquid by using vacuum suction.

…moisture. Units are suitable for aspirating aqueous solutions including buffers but are not recommended for acidic, basic or organic vapors and gases. Units feature pressure capacity to 33 psig (3.3 x 105 pascal). 1233K57 has a pumping capacity of 11 lpm and vacuum to 21.3 Hg (292 mbar). Power…

QuickTrap Systems are for the aspiration of standard, radioactive or pathogenic cell culture supernatants.  Housed in acrylic cabinets for protection from beta radioiostopes. Primary and secondary traps. Tygon vacuum tubing with in-line ABS quick disconnect fittings. Hydrophobic PTFE filter…

Fits faucet with 3/ 8 inch internal pipe thread Usable for pump-off of corrosive vapors which attack metal Operates efficiently with water pressures as low as 7.5 psi for minimum water consumption Maximum free air pumping capacity of 11.5 liters per minute at a water flow rate of 6.5 liters per…

Thick-walled polypropylene Nalge 2126 Wide mouth Polypropylene bottle and closure TPE gasket for leakproof vacuum Sizes range from 1 to 5 liters Durable bottle for extra-rugged service. Polypropylene bottle with white polypropylene closure and TPE gasket provide…

…and doesn’t require an external vacuum or power source. No Vacuum Required The QuikSip works without any external vacuum source, allowing it to be easily transferred between workstations. Each plunger stroke powers up to 25mL of aspiration. Easy to Use The QuikSip includes…

Costar® aspirating pipets are sterile, without graduations and unplugged for aseptically aspirating liquid by using vacuum suction. One piece polystyrene construction Sterile and certified nonpyrogenic

…a range from -250 mm to -650 mm Hg. Once target vacuum is reached, pump automatically switches off. Pump automatically switches on when vacuum pressure is applied allowing it to maintain a constant vacuum pressure - perfect for gentle aspiration of small plates and dishes, as well as rapid emptying…

Aspirating pipettes are sterile, individually wrapped plastic serological pipettes that are supplied without filter plugs and graduations for vacuum aspirating applications. They are very useful in tissue culture applications when aspirating larger volumes from dishes, flasks, or roller bottles.

Capacity 6 liters With size 53 polyethylene screw cap, polyethylene spigot and overflow tube which takes 3/8” i.d. tubing Height 16 1/4”; as furnished with Thomas number 3915G20 Water Still