Wire Test Tube Racks

Compare Tool

Select up to 3 products

Wire Test Tube Racks
1 - 32 of 36
Sort
View
Show
  • Wireless Tube Racks, Half Size

    Globe Scientific

    racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat endplates for labeling and easy sample identification Dense nylon material will not float in water bath 15mL conical tubes fit 20mm racks and 50mL conical tubes fit 30mm racks

  • Scienceware® Poxygrid® Test Tube Racks

    Bel-Art Products

    Choice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…

  • Wireless Tube Racks, Full Size

    Globe Scientific

    …stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat endplates for labeling and easy sample identification  Dense nylon material will not float in water bath 15mL conical tubes fit 20mm racks and 50mL conical tubes fit…

  • Scienceware® No-Wire™ Test Tube Half Racks

    Bel-Art Products

    Compact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods. Available in 5 grid sizes to accommodate the full range of laboratory test tubes Steam autoclavable at 121°C (250°F) Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")

  • Epoxy-Coated Wire Test Tube Rack

    United Scientific Supplies

    Heavy wire test tube rack includes a durable epoxy coating. Holds up to 36 tubes.

  • Poxygrid® 50mL Centrifuge Tube Racks

    Bel-Art Products

    50mL Multiple Tube Holders Made of epoxy-coated steel wire, these racks hold up to thirty-six 50mL centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223°C…

  • Poxygrid® "Rack and a Half" Test Tube Racks

    Bel-Art Products

    For High Volume Work High quality epoxy-coated wire racks in convenient extra-long sizes for volume test tube work. Epoxy coated steel wire is chemical and corrosion resistant Steam autoclavable at 121°C (250°F)

  • Scienceware® Rack Slanted for 50ml Centrifuge Tube

    Bel-Art Products

    …pellets. Each rack holds eight 50 mL conical tubes or other vessels up to 30 mm in diameter. To keep samples off the bench but still immediately available, the rack can be attached to the underside of a shelf using built-in mounting points. Racks’ epoxy-coated steel wire construction…

  • Poxygrid® 96-Place Test Tube Racks

    Bel-Art Products

    Maintain the 96-Place Format of High Throughput Applications with Large, 15mL Test Tube Capacity Ideal for mimicking the 96-place format used in microplates, deep-well plates and other tools configured for drug discovery and robotic applications. Flow-through design allows rapid…

  • Rack 16mm 60 Place Blue

    Scienceware®

    …The rack can sink in a water bath and remain stable even in agitated water. Each rack features end plates for labeling as well as numbered and lettered rows for tube identification. Assembly takes only seconds with fold up sides and end bars that lock into rack tops. Great alternative to wire racks,

  • Poxygrid® 60 & 150-Place Test Tube Racks

    Bel-Art Products

    …steel wire test tube rack is coated with heat-cured epoxy for long life and easy cleaning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range: -223°C (-369°F) to 121°C (250°F); autoclavable All racks have square…

  • Scienceware® Poxygrid® 15mL Conical Tube Rack

    Bel-Art Products

    Epoxy-coated steel wire rack holds 15 conical bottom 15mL centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes. Generously spaced for easy handling Heat-cured epoxy coating is unaffected by organic…

  • No-Wire Test Tube Grip Racks

    Bel-Art Products

    Test Tubes ‘Hang in There’ in Any Position, Even Inverted! Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work. Special blend of autoclavable polypropylene plastic is heavier than water…

  • Poxygrid® "Half-Size" Test Tube Racks

    Bel-Art Products

    …limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy Unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a temperature range of…

  • Scienceware® No-Wire™ Bottle & Vial Racks

    Bel-Art Products

    Small enough to hold in one hand and enough choices to accommodate most vials and small bottles. Offered in 5 grid configurations Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70") Polypropylene; autoclavable

  • 1-Well Racks

    Heathrow

    …steel wire racks, friction-fit polystyrene racks, or interlocking polypropylene racks. The autoclavable, epoxy-coated steel wire rack provides more friction with the benchtop for more secure positioning. The friction-fit polystyrene rack slides smoothly across the benchtop and snugly fits tubes

  • Draining Rack

    Accurate Wirecraft

    Can be used upright or flat on table, in sink or hung on wall Spot-welded steel wire coated with Neoprene, with removable, galvanized iron drain pan Has 18 nylon-coated pegs 127 mm long x 11 mm o.d., spaced 76 mm apart and 72 pegs 76 mm long x 9.5 mm o.d., spaced 38 mm apart. Pegs…

  • Wire Drying Rack

    Heathrow

    …and dry test tubes, beakers, flasks, and other labware. Place selfstanding rack on a table or near a sink. Or, use hooks to hang rack on the wall. Holds up to 90 pieces of labware on eighteen 127 mm pins and seventy-two 76 mm pins. Constructed of spot-welded, vinyl-coated steel wire for durability.…

  • Spill Containment Tray with Grid

    Bel-Art Products

    Large, deep, polypropylene tray protects users by capturing accidental hazardous spills. Epoxy coated wire support grid holds numerous vessels or racks of test tubes. Steam autoclavable at 121ºC (250ºF). Outstanding chemical resistance. Volume: 7.0 liter (237oz) Outside Dimensions: 36.5 X 30.8 X…

  • Poxygrid® Labware Drain Stand

    Bel-Art Products

    Dry Test Tubes, Beakers, Flasks, and Other Labware For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting. Three rows of epoxy-coated hairpin-loop supports (14 in all) hold…

  • Rack 16mm 60 Place White

    Scienceware®

    …The rack can sink in a water bath and remain stable even in agitated water. Each rack features end plates for labeling as well as numbered and lettered rows for tube identification. Assembly takes only seconds with fold up sides and end bars that lock into rack tops. Great alternative to wire racks,

  • Scienceware® No-Wire™ Test Tube Racks

    Bel-Art Products

    Great alternative to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit…

  • Scienceware® Color-Coded No-Wire Polypropylene Test Tube Racks

    Bel-Art Products

    …of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x 4.1”…

  • EZ-Clamp Test Tube Racks

    LabStrong

    …universal test tube rack clamp. All of the LabStrong Test Tube Half Racks can be placed in the EZ-Clamp Test Tube Rack Clamp. The test tube rack clamp features finger-tightening knobs on each end of the clamp that allow for variable tilting of attached test tube racks. By tilting the test tube racks

  • Switch-Grid™ Test Tube Racks

    Bel-Art Products

    …as needed. Each rack frame includes a set of grids in one size. Grid sets in alternate sizes can be purchased separately. 10mm to 30mm diameter test tubes fit in 5 colored coded grid inserts Three tier rack holds tubes securely in place Rubber feet keep racks from sliding on benchtop,…

  • Rack 13mm 90 Place Blue

    Scienceware®

    …The rack can sink in a water bath and remain stable even in agitated water. Each rack features end plates for labeling as well as numbered and lettered rows for tube identification. Assembly takes only seconds with fold up sides and end bars that lock into rack tops. Great alternative to wire racks,

  • Rack 16mm 60 Place Red

    Scienceware®

    …The rack can sink in a water bath and remain stable even in agitated water. Each rack features end plates for labeling as well as numbered and lettered rows for tube identification. Assembly takes only seconds with fold up sides and end bars that lock into rack tops. Great alternative to wire racks,

  • Rack 13mm 90 Place Red

    Scienceware®

    rack can sink in a water bath and remain stable even in agitated water. Each rack features end plates for labeling as well as numbered and lettered rows for tube identification. Assembly takes only seconds with fold up sides and end bars that lock into rack tops. Great alternative to wire racks,

  • OSMETTE™ Automatic High Sensitivity Osmometer

    Precision Systems

    …reusable or disposable tubes Probes last 2 to 4 times as long as comparable models Comes with instruction manual, 24 2.0 mL sample tubes, 12 0.2 mL sample tubes, 100 & 500 mOsm/kg calibration standards, bath liquid, spare stirring wires, and a test tube rack. Power: 115v 50/60 Hz. …

  • CRYETTE A™ Automatic High Sensitivity Milk Cryoscope

    Precision Systems

    …disposable tubes Probes last 2 to 4 times as long as comparable models Comes with instruction manual, 24 2.0 mL sample tubes, 250 mL each of 7% & 10% sucrose-equivalent salt calibration standards (-.422°H & -.621°H), spare stirring wires, bath liquid, and test tube rack.

  • CRYETTE A™ Automatic High Sensitivity Dual Range Petroleum Cryoscope

    Precision Systems

    …environment during sample isolation Comes with instruction manual, 24 2.0 mL sample tubes, spare stirring wires, 125 mL each of two standards, 250 mL of bath fluid, test tube rack, and spare stirring wires. Power: 115V 50/60 Hz. Dual Range CRYETTE A™ is shipped assembled and…

  • Multi-Tube Vortex Mixers

    Ohaus

    …allow the operator to view both settings simultaneously (digital models) Operation Detachable 3-wire cord and plug (included) Construction Stainless steel foam rack for (50) 12 mm diameter tubes (included), interchangeable foam racks for vortexing tubes from 10 - 29 mm in diameter

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.