Autoclavable Jar

…1,000 mL jars have recessed tops for stacking. 125 and 250 mL sizes fit Osterizers and other blenders with Mason jar threads. They also accept regular Mason jar closures. Temperature range: -135°C to 135°C. Not recommended for shipping liquids. Before autoclaving, set closure on top of jar without…

Nalge 2118 Polypropylene with polypropylene screw closure. Translucent jars are repeatedly autoclavable, with excellent chemical resistance.

Nalge 5300 jars with covers Completely transparent, multipurpose containers with high-impact strength Excellent for use as water baths, aquaria, terraria or freeze-drying chambers Autoclavable Usable at temperatures up to +135°C Walls are 3 mm thick; can be…

Autoclavable at 121°C Heavy walled, with standard Mason threaded neck Polypropylene screw cap has sealing ring and grip lugs

…available lined or unlined Autoclavable General storage containers are suitable for use with powders and solids.  The large surface area on these jars makes it easy to label, either on the wide-mouth cap or directly on the side of the jar. Unlike glass jars, plastic jars will not break easily…

Store and transport solids with Thermo Scientific™ Nalgene™ Polypropylene Jars. These jars are chemically compatible with a wide range of lab materials. Straight sides and no neck making access and retrieval easy Larger sizes make excellent waste crocks Autoclavable

This anaerobic jar is specially formulated for temperature stability and durability. It’s unbreakable, lightweight, transparent and, of course, autoclavable. Double screw clamp, coupled with the patented Quad Ring, ensures a more positive seal, superior to conventional O-rings. It also doubles…

…cap. Thick, heavy-duty construction. Autoclavable with wide temperature range of -270°C to 250°C. Walls are translucent with ribs on four sides. Knurled cap has molded inner ring which seals against mouth of jar. Stackable. When heating or autoclaving, top should be removed or loosely set upon…

…waste sampling, long term storage and a variety of laboratory uses. Standard 70mm, G-threaded necks, and screw caps with unique grip lugs and removable leakproof silicone rubber ring seal Cap and jar are steam autoclavable at 121ºC (250ºF); loosen cap when autoclaving

Large opening for easy placement and removal of slides Screw-on cap prevents evaporation and contamination Five slots hold up to ten slides back-to-back for staining Made from durable, autoclavable polypropylene (PP)

Nalge 2115 Autoclavable leakproof With 70 mm neck which fits fixtures or closures having Mason jar threads, such as Osterizer blending assemblies. Molding ring in polypropylene cap seals against mouth of jar to prevent breakage.

Nalge 2117 Autoclavable jars offer glass-like clarity with good chemical resistance Polymethylpentene with polypropylene screw cap Straight sides Excellent museum jars; formaldehyde loss is only ≈2% a year 125 and 250 mL sizes have Mason jar threads and are useable with Osterizer…

White Polypropylene Available in an assortment of sizes FDA approved Excellent for storing liquid or dry stock Can be used for samples Jars are autoclavable at 121°C (250°F) Caps have PE foam lining and are not autoclavable

… Slide Staining Jar to minimize spill and evaporation. A handle is permanently attached to the rack for easy insertion and removal of slides without your fingers touching the solution. Available in dark gray only. Will resist temperatures between -170 °C and +121 °C. Autoclavable. Dimensions: 60 x…

Glass jars with stainless steel lid. Non autoclavable.

…following chemicals or their vapors: amines, aldehydes, esters, aromatic hydrocarbons and ketones. WARNING: do not autoclave when used for vacuum service. Not usable with most organic solvents. Contact with unsaturated or partially halogenated hydrocarbons may cause immediate failure of jar.

These autoclavable caps are designed to ensure the ultimate in product safety. The liners are white styrene-butadiene faced with Teflon.

Coplin Staining Jar with flat cap is made of polypropylene and can hold 10 slides (75mm x 25mm) back to back. The interior is grooved to hold the slides in an upright position. Flat cap features large milled edge for easy hand grip and has a built-in plug. Autoclavable.

…knurled edge, deep thread and a seal ring to prevent leaks. Five internal slots hold up to 10 standard 25 x 75mm (1 x 3") slides back to back Base diameter: 6cm (2-3/8"); Height: 11.4cm (4-1/2") Steam autoclavable at 121°C (250°F); remove cap when autoclaving

…waste sampling, long term storage and a variety of laboratory uses. They have standard 70mm, G-threaded necks, and screw caps with unique grip lugs and removable leak proof silicone rubber ring seal. Cap and jar are steam autoclavable at 121ºC (250ºF). Loosen cap when autoclaving.

…a standard blending assembly (8670). Fits Waring power units 1224E41: Blender Base for Wide Mouth or Mason Jars. Comes with one Borosilicate glass wide mouth 250 ml jar and small size blending assembly. Also available with Centrifugal Flow Blending Assembly, Order No. 8497. Fits Waring…

Resistant to moisture vapor Chemical barrier Autoclavable Caps have excellent properties of resilience. The 14B white rubber lining material consists of homogeneous sulfur cured styrene-butadiene rubber. FDA Status complies with 21CFR 177.26, "Rubber articles intended for repeated…

…sample material are autoclavable Perfect adaptation to application requirements by variable speed from 500 to 4000 min-1 with an increment of 100 min-1 Optional gravitation lid for automatic reduction of the grinding chamber volume 10 SOPs can be stored Grinding jar in plastic and…

…and alcohols. Compliance: Graduated Cylinders Meet CFR 21, Part 177.1520 and ASTM* E 1272 Class B accuracy requirements as well as ISO Standard 6706. Beakers meet ISO/DIN 7056 International Standards for Laboratory Plasticware Accuracy. Remove jar closure and autoclave separately.

…cover airtight even without applying a vacuum Recessed rim keeps grease off benchtop when cover is set down Desiccator takes any standard 230mm desiccator plate (sold separately) Note: Desiccator is not autoclavable. Includes: Cover, Stopcock Requires: 230mm plate

…Fluid transfer closure is composed of polypropylene and is made for fluid transfer in the lab or field Autoclavable closure fits Nalgene® Mason jars or 125mL and 250mL straight-sided jars with 70mm closures Top of closure has 2 external male vent ports allowing for external connection to a…