Syringe Needle, Stainless Steel OD: 1.2 or 1.6mm available Length: 180, 200, and 300mm available Long needle used for solvent retrieval.

With Vigreux Indentations, used with 25mm immersion thermometer, and D27 distillation receiver.

High Vacuum Valve Plug, Synthware, Size: 0-4, 0-8, and 0-12mm available, Stem Material: PTFE,O-rings Material: Viton.

Liebig Condenser Jacket Length: 100, 120, 180, 200, 250, 300, 400, and 500mm Joints: 14/20, 19/22 and 24/40 available Hose Connection: 8 or 10mm With outer joint at the top and inner joint at the bottom.

SYNTHWARE round bottom, heavy wall, two neck flasks with standard taper outer joints on both the center neck and the angled side neck. All sizes are hand blown from tubing to ensure uniform wall thickness.

Buchner Funnel, Fritted Disc Capacity: Multiple capacities available ranging from 2-600mL Disc OD: 10-90mm available Porosity: Xtra Course, Coarse, Medium, and Fine available Not recommended for filtration where pressure will exceed 15 psi

Joint Clamp, Standard Taper, Plastic, Synthware, Various Joint Sizes Available.

Coil Reflux Condensor, Microscale, Synthware, Joint: 14/10, for low boiling solvents, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

Stopcock, High Vacuum, Double Oblique, Synthware, Bore: 4mm, Plug Size: 17.35/50, Stem OD: 10mm, With solid glass plug, Precision ground with corresponding numbers on the barrel and the plug.

Synthware distillation adapter with sealed in drip tip. Adapter is bent at 105 degrees. Standard taper top outer joint and lower inner joints. 

Synthware vacuum take-off adapter with drip tip. The upper outer and lower inner standard taper joints are the same size. 

Synthware Vigreux distillation connecting adapter. Indenstations in lower section improve liquid/vapor contact. The standard taper top outer joint accomodates a 76mm immersion thermometer. Bottom and side joints are standard taper inner joints.

High Vacuum Valve, Three Way, Synthware, Size: 0-8 or 0-12mm available, Side Arm OD: 9mm.

1164V90-V91 Double Manifold, Hollow Glass Stopcocks, Spherical Joints, 4 and 5 port manifold available, Joint Size: 35/20, Connections front-left right and rear-right, Overall Width: 365 and 450mm available. 1164V92 Double Manifold, Hollow Glass Stopcocks, Spherical Joints, Ports: 4, Joint…

Solvent Still, Built-In Condenser Capacity: 125mL Joints: 24/40 Threaded Side Port: 14/10

Trap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. With upper outer and lower inner standard taper joints.

Column length is measured from the highest to lowest indent in the column.

Adapter, #15 O-ring joint to 14/20, 19/22 or 24/40 inner joint

Pinch Clamp, Stainless Steel, Synthware, Various sizes available.

Kemtech America Cover Glass in White Glass. Cover Glass available many dimensions and come in either 1mm or 1.5mm thickness. Individually wrapped by Aluminum vacumm pack with desiccant.

SYNTHWARE round bottom, heavy wall, four neck flasks with standard taper outer joints on both the center neck and the angled side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.

Allihn Condenser Jacket Length: 120, 200, 300 or 400mm available Joints: 14/20, 19/22 or 29/42 available Hose Connection OD: 8 or 10mm With outer joint at the top and inner joint at the bottom.

Vacuum Takeoff Adapter, Microscale, Synthware, Joint: 14/10, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

Conical Reaction Vial, Heavy Wall, Graduated, Synthware, Multiple Sizes available, Joint: 5/5, 7/10, or 14/10 available.

Synthware vacuum adapter has a standard taper outer joint and a serrated hose connection. Ideal for use as a vent or for the introduction of pressure/vacuum.

Air Reflux Condensor, Synthware, Joints: 14/20, Overall Length: 143mm, Length Between Joints: 96mm.

With the outer and inner joint at 135° angle, used with short-path.

Penny-Head Stopper, Glass, Hollow, Synthware, Various Joint Sizes Available, heavy wall design.

Addition Funnel, High Vacuum Valves, Synthware, Capacity: 100 or 250mL available, Joints: 14/20 or 24/40, High vacuum valve has PTFE O-ring at tip and PTFE wiper to protect Viton O-ring on shaft.

Backlit LCD Display Temperature Range: Room Temp-340°C 5" Heating Plate Speed Range: 100-1500rpm

Penny-Head Stopper, Flask Length, Synthware, Various Joint Sizes Available.

Dewar Flask, Tall Form, Metal Housing Capacity: 350, 665, 1000, 1900, 3500, and 4300mL available Interior Depth: 125, 195,190, 302 and 305mm available Interior Diameter: 70mm Flask has weighted base for stability and a full length aluminum housing which extends to the top rim. *Due…