Reflux Condenser

Compare Tool

Select up to 3 products

Reflux Condenser
1 - 32 of 53
Sort
View
Show

United Sci Supplies

  • Coil-Type Reflux Condensers with Two Upper Hose Barbs

    Kimble

    Tightly wound coil provides enough surface area to condense high vapor pressure solvents like hexane. With an internal, coil-type cold finger Standard Taper outer joint at the top, Standard Taper inner drip joint at the bottom 283000 does not have a drip joint Two hose connectors at…

  • SYNTHWARE Air Reflux Condenser with 14/20 Joint

    Kemtech America

    Air Reflux Condensor, Synthware, Joints: 14/20, Overall Length: 143mm, Length Between Joints: 96mm.

  • SYNTHWARE Large Cooling Capacity Reflux Condensers

    Kemtech America

    Jacket has an O.D. of 40mm while coil O.D. is 8mm to provide maximum cooling capacity.

  • PYREX® Cold Finger Condensers, with 24/40 Standard Taper Inner Joints

    Corning

    This simple PYREX® cold finger condenser, of relatively low efficiency, is often used to regulate refluxing by adjusting the flow of air or water through it (dephlegmation). The tubulation O.D. is approximately 10mm. This condenser has a 24/40 inner Standard Taper joint and is a replacement part…

  • Splitter, Distillation, Reflux

    Ace Glass

    Large, reflux splitter installed between the boil-up pot or column and the condenser. A 0-20mm PTFE stopcock valve allows take-off when closed and reflux return when open. The take-off terminus is a 35/25 o-ring ball joint. The overall height is 350mm. 45/50 top and bottom joints. All o-rings are…

  • SYNTHWARE Air Reflux Condenser

    Kemtech America

    Air Reflux Condensor,Microscale, Synthware, Joint: 14/10, Effective Length: 100mm, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

  • Kem-Kit Semi-Micro 14/20

    Kimble

    …extraction, reflux, reflux with addition, fractionation, and distillation (steam, atmospheric and vacuum), as well as for other organic preparations. Fourteen components are supplied: Bleed Adapter, Claisen Adapter, Connecting Adapter, Outlet Adapter, Vacuum Adapter Condenser, West,…

  • Condenser, Jacketed Reflux, Threaded

    Ace Glass

    Microscale, water-jacketed condenser used in reflux experiments. With outer joint at top externally threaded to allow an O-RING-CAP-SEAL connection with mating male joints and inner joint at bottom, with drip tip. I.D. of inner tube on code -23 is sufficiently large enough to accept regular size…

  • SYNTHWARE Allihn Reflux Condensers

    Kemtech America

    Allihn Reflux Condenser with a water cooled inner drip tip at the bottom for Soxhlet Extractors. Joint Size: Available in 34/45, 45/50, and 55/50 Jacket Length: Available in 190, 260, and 300mm.

  • West Condenser with Medium Length Joints

    Kimble

    Useful for refluxing and distillation assemblies. The narrow annular space of the West design provides high cooling efficiency due to the increased flow rate of the cooling medium Medium length Standard Taper joints Condensate is not restricted with this design Manufactured from 33…

  • PYREX Liebig Condensers

    Corning

    Suitable for refluxing, extracting and distilling operations With Standard Taper 24/40 drip tip joint at bottom All sizes take stopper size 3

  • Allihn Condensers with Full Length Water-Cooled Joints

    Kimble

    For use in many refluxing operations, including Soxhlet extractions. Straight outlet tube at top Water-cooled Standard Taper inner drip joint at bottom Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A…

  • Reflux Cold Finger Type Condenser

    Thomas®

    Of borosilicate glass All sizes have a flange on which they are suspended without use of stopper Total height of 6 3/4” Size A finger is 15 x 75 mm long; flange diameter 50 mm.

  • PYREX® Jacketed Reflux Condensers

    Corning

    This Jacketed Reflux Condenser is a replacement part for the 6949M series of PYREX® microchemistry kits.

  • PYREX® Air Reflux Condenser, Standard Taper

    Corning

    This Air Reflux Condenser is a replacement part for the 6949M series of PYREX® microchemistry kits.

  • Deluxe Microchemistry Kit

    Corning

    …of the kit or to reorder replacement parts, refer to the specific catalog numbers. -Jacketed Condenser (2405-7). -Jacketed Condenser (2405-14). -Air Reflux Condenser (2850-7). -Air Reflux Condenser (2850-14). -Hickman Still Head (3570-14). -10mL Erlenmeyer Flask (4980-10). -Claisen Head (9055-14).…

  • Heating/Insulating Tops

    Glas-Col

    …prevent vapor condensation in the upper half of a flask during distillation of high-boiling materials. The tops are designed for use with Series M, TM, or STM mantles. They protect the flask, the solutions, and the laboratory from drafts, which would disturb the reflux ration during fractionation,…

  • Spiral Reflux Condenser

    Ace Glass

    Spiral reflux condenser with inlet and outlet hose barbs located on the same side at the top of the condenser body for easy hose connections. These condensers are available in multiple lengths which allow for greater surface area dependant on the appli

  • SYNTHWARE Coil Reflux Condenser

    Kemtech America

    Coil Reflux Condensor, Microscale, Synthware, Joint: 14/10, for low boiling solvents, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

  • SYNTHWARE Air Reflux Condenser

    Kemtech America

    Vigreux Distilling Column, Microscale, Synthware, Joint: 14/10, Overall Length: 122mm, Length Indented Section: 75mm, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

  • SYNTHWARE Reflux Condensers

    Kemtech America

    Coil style reflux condenser with tightly wrapped coil providing maximum cooling. Excellent for use with volatile solvents. Condenser has a top outer standard taper joint and lower inner drip tip joint. Hose connections have an O.D. of 8mm or 10mm at the middle serration.

  • SYNTHWARE Reflux Condensers with Removable Hose Connections

    Kemtech America

    Coil style reflux condenser with tightly wrapped coil providing maximum cooling. Excellent for use with volatile solvents. Condenser has a top outer standard taper joint and lower inner drip tip joint.

  • SYNTHWARE Reflux Condensers with Angled Top Joints

    Kemtech America

    Top outer joint is angled 75 degrees to the condenser body. Coil section is 100mm in height.

  • SYNTHWARE Large Cooling Capacity Reflux Condensers with Removable Hose…

    Kemtech America

    Jacket has an O.D. of 40mm while coil O.D. is 8mm to provide maximum cooling capacity.

  • Condenser, Air Reflux

    Ace Glass

    Microscale air condenser normally used in reflux experiments. When packed with desiccant material, condenser becomes a drying tube. With inner joint at bottom, outer joint at top. Codes -10, -14 and -17 supplied with drip tip for use with 9595 Spinning Band Column. Effective length, approximately…

  • Condenser, Reflux, Spiral

    Ace Glass

    Spiral coil, reflux condenser with angled top outer joint and two equal side arms with size C hose connections.

  • Condenser, Reflux, Bulb

    Ace Glass

    Bulb style condenser with drip-tip bottom joint. Provides high efficiencies in a compact size.

  • Condenser, Coil Reflux, Microscale

    Ace Glass

    High efficiency coil condenser especially suited for vacuum applications. Coil length is 70mm. With 14/10 inner and outer joints; outer joint is externally threaded to allow an O-RING-CAP-SEAL connection with mating inner joint. Supplied with cap and O-Ring.

  • Condenser Size 22

    Kimble

    Friedrich Condenser with hose connection sidearm. 45/50 bottom standard taper joint Ring-sealed inner condensing tube with inner drip joint and side outlet for drying tube Molded 190 mm inner cold finger Used primarily in reflux mode and Soxhlet extractions Fits tubing ID…

  • Condenser & Analytical Still Head Combined

    Ace Glass

    By closing stopcock, serves as a reflux condenser; open serves as a still head for Claisen type distillation. Top joint can be used for thermometer or cold finger condenser insertion. Side vent enables head to be used in vacuum distillation. Jacketed section 140mm.

  • Reflux Apparatus, Continuous, Fuchs

    Ace Glass

    Continuous reflux apparatus keeps solvents pure and free of oxygen. Compact, upright design allows multiple units to be assembled in small areas. Distillation column is 250mm long, vacuum jacketed, unsilvered. Allihn condenser is 250mm. Adapter at top has two hose connections for maintaining inert…

  • Vertical Condenser with Manifold and Cut-Off Valve

    IKA Works

    condenser with distributor and stop valve for reflux distillation. The distributor features a condensate cover and an outlet channel which prevent the condensate from coming into contact with the seal. The solvent to be distilled can be continuously fed in through the PTFE inlet tube. Condenser and…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.