Liebig Condenser

The Borosilicate Glass Liebig Condenser is resistant to stain created by heat. The inner vessel is sealed to the outer vessel of the condenser.

With standard taper or spherical joint at bottom and top. Hose connections are size D.

Liebig Condenser Jacket Length: 100, 120, 180, 200, 250, 300, 400, and 500mm Joints: 14/20, 19/22 and 24/40 available Hose Connection: 8 or 10mm With outer joint at the top and inner joint at the bottom.

Our Liebig Condensers are made from high-quality borosilicate glass and have a straight sealed inner tube and two inlet/outlet arms. These condensers have standard joints. We also sell Liebig condensers with rubber connections or ground glass joints . PRODUCT WARNINGS Our products…

Condenser has a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.

Similar to CG-1239, but with the condenser being a combination of a cold coil and Liebig. Water flows into hose connection “A” through the coil and exits the outer jacket through hose connection “B”. Head is excellent for use when distilling medium to high boiling point…

Small scale Liebig condenser with a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.

Standard Taper outer joint at the top Standard Taper inner drip joint at the bottom Hose connections accept 3/8” ID flexible tubing Ref: ASTM Method D322 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A…

Liebig condensers are used to cool and condense hot vapor as part of a distilling apparatus. This condenser has a straight inner tube that the condensing vapor passes through, and a larger outer jacket that cooling water passes through. Socket is 24/40

Borosil® Liebig Condensers have an interchangeable inner and outer joint with a drip tip. This simple design has a thin wall for the inner tube, facilitating efficient heat transfer with a low cooling capacity. Most common forms of use are distillate separation. The outer glass tube has two hose…

Suitable for the use in vacuum distillations With Standard Taper drip tip joint at bottom and Standard Taper outer joint at top The 8” condenser has Standard Taper 19/38 joints; others have 24/40 joints

Suitable for refluxing, extracting and distilling operations With Standard Taper 24/40 drip tip joint at bottom All sizes take stopper size 3

With Standard Taper 24/40 joints Inlet and outlet tubes, 10 mm o.d. are on opposite sides, indentations at lower end of condenser tube support packing when used as fractionating column.

Our Liebig Condensers are made from high-quality borosilicate glass and have a straight sealed inner tube and two inlet/outlet arms. These condensers have rubber connections. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including benzene, which are known to…

With straight inner tube sealed through the jacket. This condenser is acceptable for use with Abderhalden or Mini-Lab moisture test apparatus.

With 110mm jacket length, also an additional vacuum takeoff between outer joint and jacket.

Liebig Condenser, Removable Hose Connections Jacket Length: 120, 180, 200, 250, 300, 400, and 500mm Joints: 14/20, 19/22, and 24/40 available Hose Connection OD: 8mm With outer joint at the top and inner joint at the bottom.

This PYREX® general purpose condenser can be used for either distillation or extraction. Although the condensing area per unit length of the 200mm long jacket is low, the large capacity water jacket gives efficient cooling. Condenser tubulations are approximately 10mm O.D. The adapter end is…

With standard taper 24/40 outer joint at top. Jacket length 300 mm. Hose connections are size D.

No Hold Up condenser with standard taper 24/40 inner and outer joint at bottom and top, #7 Ace-Thred inlet/outlet for connecting Ace-Safe hose connections with barb for 1/4" I.D. tubing. For replacement hose connections, see 5853. Complete item include

With water cooled standard taper 24/40 inner and outer joint at bottom and top. Hose connections are size D.

…Our Hemple Condenser is made from high-quality borosilicate glass and has a 300mm long condensing column. Our Liebig Condensers are made from high-quality borosilicate glass and have a straight sealed inner tube and two inlet/outlet arms. These condensers have a 300mm long condensing column and…

…shape bulb sealed into the outer jacket. Serrated hose connections for water connection extend through the outer bulb and have an O.D. of 10mm at the middle serration. While the overall height of this condenser is only 210-215mm, it has the efficiency of a standard 400mm Liebig or West condenser.

…efficiency air condenser is a waterless glass condenser that requires no cooling water for operation. The glass bellows design provides a high surface area air condenser which is very effective. Performance of the high efficiency air condenser is equivalent to a Liebig type condenser being…

…lengthen condensate path Inlet and outlet tubes are on opposite sides of the jacket All sizes take stopper size 3 and have Standard Taper drip tip joint at bottom and Standard Taper outer joint at top. A widely used condenser with greater surface area than the corresponding Liebig type.…

Borosil® Allihn Condensers have an interchangeable inner and outer joint with a drip tip. The Allihn Condenser has a more surface area than the Liebig, with a series of bulbs which generates a higher cooling capacity. This condenser is ideal for laboratory scale refluxing. There is an inlet and…

Conforms to ASTM D 4006 Apparatus is used for the distillation of water in crude oil. Apparatus includes 1,000 mL RB flask, 24/40 joints, Dean-Stark distillation receiver, dry trap and Liebig condenser Heating mantle must be purchased seperately

…in industry. The Boiling Flask, Erlenmeyer Flask and Kjeldahl Ball are made from heat resistant borosilicate glass. Included in the kit: Liebig Condenser with rubber connections - 300mm length, Kjeldahl ball 50mm in diameter, Boiling Flask - 500ml, three legged support stand to support the Boiling…

…jointed. Both sets come in a sturdy, form fitting case. All Joints are 14/23. Includes the following: Pear Shaped Flask (50ml), Still Head, Liebig Condenser, Screw Cap Adapter, Receiver Adapter, Air Leak/Steam Inlet Tube, Dropping Funnel (50ml with Rotoflo Tap), Stopper, and Thermometer. The…

This distillation set is made from heat-resistant borosilicate glass and held together with rubber stoppers. Includes: 1 Liebig Condenser, 300mm long with a fused inner tube (#30721) 1 Flat Bottom Boiling Flask, 500ml (#FFB500) 1 Erlenmeyer Flask, 500ml (#EF500) 1 Burette Clamp…

… 1 Biomass Flask 1 Distilling Arm with a 45/50 ground glass joint (#4009-45-50) 1 Distillation Separation Tube (#SPTB-PTFE) 1 Liebig Condenser, 300mm long with 24/40 ground glass joints (#CL300MM-24-40) 1 Support Stand (#4-SSS69) 1 Extension Clamp (#4-EC30) 1 Clamp Holder…

…o-rings (MW-100-08). CONDENSERSS, AIR REFLUX, MINUM-WARE®, CONDENSERS uses the surrounding air to dissipate the heat of the reaction during refluxing. Overall height is approx. 145mm with the effective length being 100mm. CONDENSERS has a top threaded outer joint and lower inner drip joint,…