Kemtech America, Supplies, Glass
-
Synthware Vacuum Adapters with 1:5 Teflon® Stopcocks
Kemtech AmericaSynthware vacuum adapter with a serrated hose connection turned 90 degrees to the standard taper inner joint. The PTFE stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.
-
SYNTHWARE T-Shaped Connecting Tubes
Kemtech AmericaConnecting Tube, T-shaped, Synthware, Tubing OD: 8 and 10mm available.
-
Synthware Distillation Adapters
Kemtech AmericaSynthware distillation adapter with a 10/18 standard taper outer joint for a 76mm immersion thermometer. The adapter has a standard taper top outer joint and inner joints for the bottom and side.
-
Synthware Distilling Adapters, 75°
Kemtech AmericaSynthware distilling adapter with top compression cap. With same size standard taper inner joints on bottom and side arm. Cap accomodates 5.0 - 7.5mm O.D. thermometer. Supplied with one Nylon cap and one Viton o-ring.
-
SYNTHWARE Vacuum Jacketed Distilling Heads
Kemtech AmericaDistilling Head, Vacuum Jacketed Thermometer Joint: 10/18 Joints: 14/20 or 19/22 available For use with 25mm immersion thermometer.
-
Synthware rotary evporator anti-splash trap, modified. With extra coarse porosity fritted disc sealed above lower inner joint. Trap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. Frit reduces foam overflow from being…
-
Synthware Thermometer Adapters
Kemtech AmericaSynthware thermometer adapter with a 5 degree offset and a serrated hose connection for vacuum. Joints are standard taper.
-
Synthware Claisen Adapters
Kemtech AmericaProvides dual entry into a variety of flasks. Adapter has standard taper outer joints at top and on side and inner joint on bottom. All joints are the same size.
-
Synthware Vacuum/Inert Gas Adapters with Ball Joint
Kemtech AmericaAllows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure. Hose connection is at a 90 degree angle to the spherical ball joint.
-
SYNTHWARE Adapter with #15 O-Ring Joint to Inner Joint
Kemtech AmericaAdapter, #15 O-ring joint to 14/20, 19/22 or 24/40 inner joint
-
SYNTHWARE Solvent Still, Built-In Condenser
Kemtech AmericaSolvent Still, Built-In Condenser Capacity: 125mL Joints: 24/40 Threaded Side Port: 14/10
-
Synthware Tapered Distilling Adapters
Kemtech AmericaWith an outer standard taper joint at the top. The tapered delivery drip tube extends into open receivers.
-
SYNTHWARE Y-Shaped Connecting Tubes
Kemtech AmericaConnecting Tube, Y-shaped, Synthware, Tubing OD: 8mm.
-
SYNTHWARE Kugelrohr Distilling Bulbs
Kemtech AmericaKugelrohr Distilling Bulb Capacity: 5, 10, 15, 25 or 50mL available Joints: 14/20, Bulb O.D.: 25, 31, 35, 42 or 48mm available Overall Height: 80, 85, 90, 98 or 105mm available Used in distillation of very small amount of distillate at lower temperature with high efficiency.
-
Synthware Rotary Evaporator Anti-Splash Traps, Modified
Kemtech AmericaTrap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. With two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask. Has upper outer and lower inner standard taper joints.
-
SYNTHWARE Distillation Receiving Set
Kemtech AmericaComes with Synthware Distilling Adapter (Joints: 14/20 or 19/22) and Cow Receivers (Joints: 14/20 or 19/22). Designed without hose connection to be used with D10 distillation apparatus. **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**
-
SYNTHWARE Vigreux Distilling Columns
Kemtech AmericaColumn length is measured from the highest to lowest indent in the column.
-
SYNTHWARE Hickman Still Head, with Side Port
Kemtech AmericaHickman Still Head, with Side Port, Synthware, Joint: 14/10, for microscale fractional distillation, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
-
Synthware Rotary Evaporator Anti-Splash Traps
Kemtech AmericaTrap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. With upper outer and lower inner standard taper joints.
-
SYNTHWARE Shortpath Distilling Head for Volatile Distillants
Kemtech AmericaWith the condenser being a combination of a cold coil and Leibig. Top outer joint is a 10/18 for use with a 50mm immersion thermometer. With Vigreux Indentations.
-
Synthware "U" Shaped Drying Tubes
Kemtech AmericaSynthware "U" shaped drying tube. With a lower inner standard taper joint. Cotton is typically used to contain drying agent.
-
SYNTHWARE Craig Recrystallization Tube
Kemtech AmericaCraig Recrystallization Tube, Synthware, Complete with glass outer tube and inner plug, Capacity Below Grind: 2mL.
-
Synthware Distillation Adapters, Vigreux
Kemtech AmericaSynthware Vigreux distillation connecting adapter. Indenstations in lower section improve liquid/vapor contact. The standard taper top outer joint accomodates a 76mm immersion thermometer. Bottom and side joints are standard taper inner joints.
-
Synthware Distillation Adapters with Threaded Thermometer Ports
Kemtech AmericaSynthware distillation adapter with threaded thermometer port. The threaded port will accommodate a 6-7.5mm O.D. plain thermometer. The adapter has standard taper top outer joint and inner joints for the bottom and side. All joints are the same size.
-
SYNTHWARE Dean Stark Distillation Receivers
Kemtech AmericaFor easy separation of water from reaction or distillation system.
-
SYNTHWARE Solvent Distilling Heads
Kemtech AmericaSolvent Distilling Head Capacity: 250, 500, and 1000mL available Joints: 14/20 and 24/40 available Sampling Port: 14/20. Heads feature a 2mm double oblique stopcock bore
-
Synthware Inlet Adapters
Kemtech AmericaFor use with gas inlet tubes or plain stem thermometers. Supplied with one holed rubber adapter.
-
Synthware Flushing Adapters
Kemtech AmericaSynthware flushing adapter with PTFE T-bore stopcock. Adapter has a top outer and lower inner standard taper joints of the same size. Allows for the evacuation and transfer of product into another vessel while under an inert gas.
-
SYNTHWARE Solvent Still Head, Repurification
Kemtech AmericaSolvent Still Head, Repurification Joint: 24/40
-
Synthware Distillation Adapters, 75°
Kemtech AmericaSynthware distillation adapter bent at 75 degrees. Both ends are standard taper inner joints and are the same size.
-
SYNTHWARE Solvent Still Head, High Vacuum Valves
Kemtech AmericaSolvent Still Head, High Vacuum Valves Capacity: 250mL Joints: 24/40 Valve Size: 0-4mm
-
Mineral Oil Bubbler Oil Adapters
Kemtech AmericaSynthware adapter with oil bubbler. With standard taper inner joint. Horizontal design allows for in line connection for apparatus purging.