Evaporating Flask

Compare Tool

Select up to 3 products

Evaporating Flask
1 - 32 of 136
Sort
View
Show
  • These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. Flasks marked P+G are coated. The P+G coating protects against mechanical damage and provides…

  • Replacement drying flask for Buchi rotary evaporators. Pear shaped heavy wall with a standard taper single neck. Available plain or safety coated.

  • These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass…

  • These flasks are available in sizes from 50 to 3000 mL and come with ball joint KS-35. All flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass splinters in the event of a breakage.

  • Trap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. With upper outer and lower inner standard taper joints.

  • Flask Ring Made Of Non-Slipping EPDM for Rotavapor® R-210 ( 1229D93) and Rotavapor® R-215 ( 1229E13).

  • Thomas Nos. 1203D21 through 1203D26 The flask is made of high quality borosilicate glass, coated.

  • A multipurpose, round bottom flask with a single neck and sloping side wall. Designed for use as a recovery flask with rotary evaporators. Heavy wall product family members feature approximately 30% heavier wall weights.

  • Evaporating flask feed is via stop-cock. Includes 1L receiving flask, receiving flask clip, stopcock, PTFE fill tubes, and set of GL-14 hose connections and caps. 1230E20 - Type A Condenser, Diagonal, can be used where height is limited, For standard distillations, evaporating flask feed via…

  • Similar to CG-1512 recovery flasks, but plastic coated to prevent injury from broken glass and spillage of hazardous materials.

  • The rotary evaporator R-100 is a high-quality, entry level Rotavapor to meet the essential needs in classical laboratory applications. It is capable of a manually adjustable rotation speed of 20 to 280 rpm and equipped with an action jack lift for manual lifting of the evaporating flask. Included is…

  • These flasks are also referred to as drying flasks. They are particularly suited to the drying of powdered samples as the baffles or indents provide superior mixing over plain wall flasks. X-Large flanges, common on R220 units, are 149.5mmod,118.8mmid and 21mm thick. See our 6702-300 for a o-ring…

  • Spider evaporators are for use when you need to concentrate several samples under the same conditions. Up to five samples can be concentrated simultaneously using 50 or 100 mL flasks. Up to twenty samples can be concentrated simultaneously using 20 mL cylindrical tubes.

  • Placed between the vapor duct and rotrary evaporator evaporation flask, the bump trap modifies the vapor pathway preventing transfer of any unintended sample between the evaporation flask and condenser in the event of bumping or foaming.

  • 500mL Flask, 24/40 Top, 19/22 Bottom

  • Evaporating flask for use with rotary evaporators. Flasks have a HEAVY WALL for vacuum applications and are balanced to prevent run-out during rotation. For Plastic Coated flasks, see CG-1512-P.

  • Flasks are compatible with Buchi large scale rotary evaporators. Flasks to fit large scale rotary evaporators. Flasks have a HEAVY WALL for vacuum applications and are balanced to prevent run-out during rotation. Available plain or plastic coated to prevent injury from broken glass while preventing…

  • …Patented condenser (cooling surface 1,500 cm²) provides excellent cooling Motorized lift with safety automatic release of the evaporating flask to the top position in case of power failure Speed range from 20 to 280 rpm Timer function for precise control processing …

  • Description:    Glassware vertical including condenser, evaporating flask and receiving flask Volume (mL ) :  1000 Frosted:   29/32

  • …modified evaporation single neck flask with a standard taper outer joint. Low profile design sits upright on bench and also provides for easy product access with a spatula. Flask shape is excellent for the controlled evaporation of foaming solvents such as toluene or xylene on a rotary evaporator.

  • Rotary evaporation flasks available plain, poly-coated or ambered. Poly-coating has a maximum temperature of 100 degrees C and can withstand acid and solvent splashes but not soakings. Small flange is 90mmod,67mmid and 18mm thick. Medium flange is 100mmod,72mmid and 19mm thick. Large flange is…

  • Replacement evaporator flask for Buchi rotary evaporators. Pear shaped heavy wall with a standard taper single neck. Safety coated.

  • …and quantitative efficiency including minimization of entrainment escape and transfer losses. Available in 250ml, 500ml, 1L flasks, with a 19/22 inner joint on bottom of flask, 24/40 on top. Choice of Snyder or Vigreux column. Supplied with springs (8030) or Delrin clamps (7598). Graduated receiver…

  • Convenient and efficient rotary evaporation The R-300 meets the highest expectations in convenience and versatility. Its modular design allows extension of the Rotavapor® R-300 to a fully integrated system where a central interface regulates each component. Your most important…

  • Replacement receiving flask adapters for Buchi rotary evaporators. Joins steam tube to receiving flask. Combi-clip not included.

  • Mity Plugs

    Jaece

    …plugs for all size test tubes and laboratory flasks. MITY Plugs are non-shedding, dense weave cellulose acetate E plugs for drosophila vials and bottles. Dense weaving offers a superior barrier to mite infestation. Allows for reduced food evaporation to keep food fresh longer. Unique…

  • The S-EVAP-RB® solvent evaporator for round flasks allows for up to 8 or 10 samples to be concentrated at once. S-EVAPs have a broad range of applications including oil and grease analysis using hexane and other approved solvents and concentrating extracted materials from Soxhlet operations. The…

  • Receiving Flasks

    Heidolph

  • A multipurpose, round bottom flask with a single neck and sloping side wall. Designed for use as a recovery flask with rotary evaporators. Heavy wall product family members feature approximately 30% heavier wall weights. Microscale versions, codes -43

  • Graduated, round bottom receiving flask for use with all rotary evaporators. 35/20 spherical outer joint will also mate to 35/25 ball joints. 250ml & 500mL size graduated in 10ml increments, 1000ml & 2000ml in 100ml increments.

  • Borosilicate glass receiving flask for all large scale rotary evaporators. Available in safety coated or plain glass. Side neck includes a SVL thread vent cap. Bottom inner ball joint includes CAPFE o-ring. Dark amber coated glass version is also available.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.