Ace Glass
-
Replacement glassware for Buchi rotary evaporators. Available with either a plain or safety coated outer trap. Outer trap bodies, codes -01 and -03 do not include a plug. Order separately 1 each 13295-10.
-
Flask, Round bottom, Two Neck
Ace GlassRound bottom, two neck flask. Side neck is angled. Available in standard wall for more rapid heating or heavy duty for mechanical shock resistance.
-
Beaded Pipe To Sanitary Flange Adapter
Ace GlassTransition adapter to convert beaded pipe to sanitary flange. Available in 304 stainless steel or virgin PTFE.
-
Extraction Apparatus
Ace GlassDesigned for the extracting of liquids with ether. The dispersion of the ether is accomplished by the use of an ACE fritted disc, Por. B (70-100m), which is attached to the base of the funnel tube. With 24/40 and 40/50 joints. Available in the following sizes.
-
Adapter, Gas Inlet
Ace GlassWith 24/40 standard taper inner and outer joints and side hose connection size D.
-
Available with standard taper or spherical joint. Stem below joint is 250mm. Hose connection is size C.
-
304 Stainless Steel adapter for matching glass beaded process pipe to male NPT fittings, gauges and flanges.
-
PTFE Stopcock Valve, 2 Way
Ace GlassPTFE stopcock valve, 2-way, one 1/4 inch male luer port and one 1/4 inch male NPT port, 0.046 orifice. PTFE valve used with NPT fittings. Various ends available (male and female NPT, luer, 1/4" tube and 1/4"-28 UNF). IPS PTFE Stopcocks made of virgin PTFE. Compression ferrules made of virgin PTFE.…
-
Vacuum Trap
Ace GlassUsed for freezing out undesired vapors in the vacuum system and also for use in conjunction with Dewar flasks.
-
Joints, Extended Drip Tip
Ace GlassStandard taper ioint with lower tube reduced in diameter to size listed. Length of extended tube 101mm.
-
Joints, O-Ring Seal
Ace GlassStandard taper inner member ground joint with groove for O-Ring. For use with outer members 7565, 7566, 7567, 7651, and 7652. Leakproof at high vacuum (up to 1 x 10-8mm Hg.). O-Ring permits use without grease. Supplied with one FETFE O-Ring. For replacement O-Rings, see 7855.
-
Angled Powder Funnel, Heavy Wall Glass
Ace GlassHeavy wall glass powder funnel. Angled to fit in multi-neck flasks and reactor heads. Standard taper inner bottom joint.
-
Round bottom flask with five necks arranged 3 in-line, two 90 degrees front and back of in-line necks. All necks are vertical. Available in heavy wall.
-
Flask, Reaction, Spherical, Plain
Ace GlassRugged spherical reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone O-Rings are also available. For reaction heads, see 6528, 6529 or 6530. For…
-
Pycnometer Tube, Specific gravity
Ace GlassA method for measurement of light hydrocarbon liquids as per ASTM D 941. Also Ind. and Eng. Chemistry, Analytical edition, Vol. 16, No. 1, Jan. 1944, page 55.
-
Cylindrical with joint at top and bottom and drip stem. Stopcock on equalizing arm permits filling funnel without having to open the system to atmosphere. For replacement stopcock plugs, see 8224. For stoppers, order 8250-12 or 8255-10.
-
-
Three segment, anodized aluminum, heating/mixing blocks hold up to three different size and type of vessels at the same time. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09…
-
Expansion Tank, Rotary Evaporator
Ace GlassBorosilicate glass expansion tank for large scale rotary evaporators. This fits easily into model R220 rotary evaporators. The tank is part of all D Series glass sets. Available in either safety coated or plain versions. Inner DN ball joint inlcudes a size -225 CAPFE o-ring.
-
Reaction Flask Head
Ace GlassConical 4" neck with three socket joints in line, plus a 14/35 outer joint for thermometer. Use 6496 Clamp for securing to flasks. For use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks.
-
Heat Transfer Block - Microscale
Ace GlassAluminum heat transfer block, 9594-12 for use in place of a glass sand bath in Microscale experiments. Offers excellent heat transfer and will not interfere with magnetic stirring. Block has four holes for vials and one hole for thermometers. 9594-16 for use on top of stirrer-hot plate to effect…
-
Flask, Two Necks, Vertical
Ace GlassTwo neck, one center and on vertical side neck, round bottom flask with standard taper joints. Available in standard wall or heavy wall.
-
Distilling Apparatus
Ace GlassA compact fractionation unit for distilling small quantities in a vacuum, and for ordinary separation. Column is vacuum jacketed. The indents are positioned to cause the vapor to follow a spiral path. Approximately three theoretical plates at 60mL/hr. Hold up to 1.2mL operating, 0.5mL static.…
-
Distilling round-bottom flask coated with Ace Instatherm. Designed to operate up to 360 & deg; C, heating response time is very rapid, (5° per minute), with very low thermal lag. Has vertical standard taper reinforced outer center neck and angled standard taper reinforced outer side neck.…
-
Adapter, pH Probe Tube, Pilot Plant
Ace GlasspH probe adapter tube extends the probe deep within large capacity flasks. Fits in 45/50 opening on head and is vertically adjustable along its length. Available with either Chemraz or Fetfe o-rings and in 24 in(61cm), 36 in (91cm), or 48 in (122cm) le
-
Tube, Allihn
Ace Glass,p>Diameter of disc 30mm, height above disc 100mm, diameter of bottom tube 8mm.
-
Adapter, Offset
Ace GlassAdapter with #15Ace-Thred top and 14mm OD offset bottom tube with O-Ring grove. Used on small pressure reaction vessels and heads to allow for more space for columns, condensers and addition funnels.
-
Stir Shaft, Retreat Agitator, PTFE
Ace GlassPTFE covered stainless steel shaft with a solid PTFE retreat curve agitator. Featuring a retreat angle of 30 degrees and, for a better grip by the stir motor chuck,50mm of exposed stainless.
-
14 psi rated, graduated, netted clear or plastic coated solvent reservoir bottles featuring an Omnifit, 3-valve cap. Only PTFE & Tefzel wetted surfaces. Individually controlled valves permit the application of gas under pressure for venting, flushing,
-
Tube, Straight
Ace GlassFor construction of special apparatus. All porosities of a given size are priced the same.
-
-
Same as 7854-25 Immersion Well except that the 60/40 inner joint is PTFE-Clad. Double-walled, quartz Well with inlet and outlet tubes for cooling. Small diameter inlet tube extends down the annular space to ensure flow of coolant from bottom of well upward to inlet.