Ace Glass
-
Heavy duty, 28mm O.D. glass stirring shaft for use with ACE 12845 reactors. Shafts are pre-drilled to accommodate 8091,8093 & 8101 agitators for 28mm od shafts. Recommended for use with either our 8067 Trubore™ bearing with debris trap or our 8050 non-shedding bearing. For motor connection,…
-
Adapter Connecting, NO-AIR
Ace GlassThree way, Y shaped adapter. 2-outer standard taper joints, 1-inner standard taper joint. All three the same size. Great for joining flasks and other components for Schlenk lines.
-
Precision ground glass stirring shafts, 19mm OD, hollow. Button type shafts accept 8085 blades and can be used in all 19mm ID Trubore 8059, 8060, 8061 and 8065 bearings. Compatible with our 8050 mechanical seal and 13445 PTFE Debris-free bearings. Join to stirrer motor using 8124 series chucks.
-
Heidolph accessories including circulating condensor, two-stage diaphragm vacuum pump, vapor tube, guard hood, guard shield, sensors, remote control, foam break adaptor, Woulff bottle, condensate cooler, and powder flasks, etc.
-
Stoppers, Medium Length
Ace GlassMedium length standard taper stoppers, size 7/15, 10/18 and 12/18 are solid, all others are hollow.
-
With tooled neck for uniform stopper fit. Side hose connection is #11 Ace-Thred that accepts a PTFE Tubing Connector with silicone O-Ring and Nylon bushing to make an easier, safer, more convenient vacuum hose connection. Two connectors are available:
-
Caps, GL Thread - Duran®
Ace GlassScrew caps and pouring rings for use with GL threaded bottles. For steam autoclaving, we recommend PBT (polybutylene theraphthalate) caps with a PTFE liner, -45 to 180 degrees C rated. Polypropylene is only rated to 140 degrees C. 316L stainless steel cap is for use with stainless steel laboratory…
-
For exhaustive distillation of pesticides and industrial chemicals from water, sediments and tissue, and the simultaneous extraction of the distillate by a small volume of organic solvent. The addition of a bulb condenser in place of the straight tube condenser results in more efficient condensing…
-
Tube, Allihn
Ace Glass,p>Diameter of disc 30mm, height above disc 100mm, diameter of bottom tube 8mm.
-
Distilling Head, Variable Reflux Ratio
Ace GlassConstructed so that satisfactory operation can be maintained under any pressure condition. 10/30 thermometer joint takes 76mm immersion thermometer listed under 8315. Side arm joint is 24/40.
-
Bent Vertical Hose Barb Vacuum Trap
Ace GlassThomas No. 1166W00 Trap, stopper, vacuum, bent vertical tube, 29/32 Thomas No. 1166W01 Trap, vacuum, complete, bent vertical tube, 29/32, 32mm od outer²body, 13mm od inner/side tube,body length 250mm below joint Thomas No. 1166W02 Trap, stopper, vacuum, bent vertical tube,…
-
Distilling Column, Vigreux
Ace GlassLength in millimeters refers to the effective length of the column as measured from the lowest to the highest indent of the column. Available in a microscale version, top center joint is 14/10 externally threaded for making an O-Ring-Cap-Seal type conn
-
Fritted filter disks for Ace Membrane Filtration Apparatus. Special tight outside diameter and tolerance to fit 3702-10 and 3700-10 filter adapters.
-
-
Flask, Heidolph Laborota
Ace GlassLarge receiver/evaporator flasks for use with Heidolph 20L rotary evaporators. Flasks are fabricated from blanks selected for balance and quality with carefully welded necks to provent "rotational whip". Receiver flask has a polished 40/25 joint, side neck is a GL-18 thread with solid cap. Bottom…
-
Air Sampling Cane, with Funnel
Ace GlassAir sampling cane with funnel at one end to avoid water droplets from collecting at edge and being sucked into manifold train. Bulge above the funnel is for glass wool or similar material to allow for filtering of particulates. Codes -22 & -26 feature a #7 Ace-Thred port for introducing calibration…
-
Valve, Shutoff Adapter, Omnifit
Ace GlassOmnifit shutoff adapter with 1/4"-28 male thread and 1/8" PTFE tubing.
-
Vacuum Trap
Ace GlassWith both arms in vertical position. 60mm O.D. x 250mm long. Side arms are 12mm O.D. Available with or without serrated connections on arms. Serrated connectors have six rings: the smallest, 14mm O.D.; largest, 16mm O.D.
-
Designed to make a leak-tight seal without the use of O-Rings. Simply tighten until white ring appears indicating a seal has been made, then secure locknut. No need to over-tighten. Ace-Thred adapters feature a 1/4-28unf tap, with or without a 18-8 stainless Helicoil insert for durability. See our…
-
Round bottom, indented Morton Type, three neck flask. 500ml and 1L sizes have angled side necks while larger sizes feature vertical necks. Available in heavy wall. Indents enhance agitation during stirring.
-
Tube, Filtering
Ace GlassWith fritted disc sealed on bottom. Overall length 125mm. All porosities of a given size are priced the same.,/p>
-
Coupling, Reducing, Nylon or PTFE
Ace GlassFor coupling threaded columns together or to end fittings with single O-Ring seal for leak tight engagement with hand pressure and no sig-nificant size reduction in I.D. One end threaded for the next smallest diameter. Size listed refers to inside diameter of threads. Supplied with two FETFE…
-
Funnel, Powder Dispensing
Ace GlassSide operated screw feed instrument for addition of powders and solids, up to 25 mesh, to reactions without problems of seizing or binding. Features a flexible PTFE screw thread wrapped on a precision PTFE-ceramic shaft and contained within a precision bore housing.This offers a unique flexibility…
-
Bearing, Trubore, High Vacuum, 10mm
Ace GlassThis bearing is the standard liquid seal type except that the use of Trubore tubing enables this unit to perform very satisfactorily under high vacuum conditions. Use our precision ground stirring shafts (8068,8070,8071,8073,9532,9533).
-
Thomas Nos. 1165M15, 1165M16, 1165M17, 1165M18, 1165M19, 1165M20, 1165M21 Jacketed cylindrical flask with flush seal and beaded pipe²inlet and outlets. The flask is graduated on both sides²which allows for either left or right hand orientation.²Features a Schott-Duran style o-ring…
-
Self-aligning, lubricant free PTFE Trubore bearing or combination bearing / debris trap. Use with 8076 (19mm od) or 8080 (28mm od) polished glass stir shafts. Debris trap model prevents bearing-wear particles from contaminating the reaction vessel and has a side port for clean-out, evacuating or…
-
-
Hydrogenation/Gas Apparatus I
Ace GlassParr Model 3911 Hydrogenation unit for working volumes of 1ml to 200ml . Ace-thred vessels replace rubber stoppered vessels and eliminate cross-over contamination caused by leeching or sample retension. Complete unit includes all adapters needed for the supplied 8648 series bottles…
-
Reaction Flask Head, Ace-Thred
Ace GlassConical 4" (10.2 cm) neck for use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks. Supplied with three outer joints in line, plus a thermometer side arm which is internally threaded for use with 5029 Nylon B
-
-
Complete, two-piece, plain flask with bottom outlet, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. Two-piece (flanged flask and head)…
-
Flask, Round Bottom, Four Neck
Ace GlassRound bottom flask with four necks arranged 3 in-line and one at 90 degrees. The three side necks are angled.