Ace Glass
-
Beaker, Kilo Scale with pourout
Ace GlassLarge size graduated beaker for batch operations and mixing large volumes of measured liquids.
-
Transition adapter to convert a sanitary flanged apparatus 2 to a standard taper inner joint. Made of virgin PTFE.
-
Adapter, Rotary Evaporator Vial Adapter
Ace GlassPTFE connecting adapters and glass conversion adapters for connecting GPI threaded vials to a rotary evaporator vapor tube or trap. Both are suitable for vacuum work. PTFE connecting adapters are available with FETFE or Chemraz o-rings. Order Chemraz if you are using Methylene Chloride or Acetone.…
-
Straight connecting adapter, 4mm glass plug stopcock, 15mm O-Ring top joint and either a spherical joint or an inner standard taper joint on the bottom.
-
Reaction Flask, Spherical
Ace GlassRugged spherical flask with neck opening of 4" (10.2cm). Standard size flasks use regular Glas-Col heating mantles of equivalent capacity. Length of straight section including flange, approximately 9.5cm (33/4 "). Uses 6496 Clamp for securing flask hea
-
Ace-Threds and Ace-Thred and joints
Ace GlassWith Ace-Threds or Ace-Thred and joints. Accepts a single 5mm or 10mm O.D. NMR Tube. Solvent reservoir capacity is 55mL. All threaded versions have a filter flask with a #15 Ace-Thred at top and O-Ring and #11 Ace-Thred side port with a removable Ace-Safe hose connection. Threaded-jointed version…
-
Flexible, immersion or implantable microprobes, Type J, K, and T (for low temperatures). Three foot long wire lead, isolated electrically, is PTFE covered and can be assembled into septum, etc. using needle supplied. Maximum operating temperature of microprobe is 150 degree C .
-
Tube, Gas Dispersion
Ace GlassSupplied with 6, 7 or 8mm O.D. stem tubing, 150mm in length. Maximum O.D. of stem and filter disc is 20mm. Filter disc is 10mm diameter, porosity B (70-100 m).
-
Condenser, Friedrichs
Ace GlassReflux controlled by regulating jacket temperature. Provides compact spiral path for condensation. Jacket length 200mm. Bottom standard taper 24/40 joint.
-
PTFE Sleeves, .38mm
Ace GlassDesigned for use with inner member regular joints with only a slight mismatch. Treated on inner surface so that it may be cemented to glass with ACE 7560 epoxy adhesive. Sleeves may also be used uncemented to replace lubricant at low pressure differentials. ACE PTFE sleeves are accurately shaped to…
-
Condenser, Allihn
Ace GlassBulb type, approximately one bulb per 50 mm, with various joint sizes at bottom and top. Available with hose barbs or Ace-Safe connectors.,/p>
-
Adapter, Vacuum Filtration
Ace GlassUsed for reduced pressure filtration with 7186 style, plain stem Buchner funnels. Top is tooled to accept a pluro stopper, bottom has a joint. Serrated hose connection has a second ring of 13.5mm O.D. Inserting the recommended size pluro stopper and th
-
Repeat cycle timer control, bench top or bar mountable, for regulating reflux ratio on distillation heads. Supplied with removable side bar for mounting to 1/2in rod. Minimum and maximum on/off range: 0.1 to 6000 seconds. Available in 120v. 24 month limited warranty.
-
Chuck, Flex-Grip®
Ace GlassNylon chuck for use with ACE stirring shafts or other shafts of the same dimensions. Chuck has flexible insert which allows for misalignment of shaft without danger of breakage.
-
Septa, Gray Silicone
Ace GlassSepta, gray silicone, 3mm thick. Code -06 used with #7 Ace-Thred, code -10 used with #11 Ace-Thred. Supplied 12 per package.
-
Stoppers, Flask Length
Ace GlassFlask length standard taper stoppers, size 9 is solid, all others are hollow.
-
Adapter, Feed Tube, Septum
Ace GlassThreaded both ends and with additional #7 threaded side opening for introduction of samples by hypodermic syringe. #7 thread at top is supplied with 5029 Nylon bushing and Fetfe O-ring for use with 5831, 5832 adjustable feed tubes. Size listed is Ace-thred designation which refers to I.D. of tubing…
-
Condenser, Cold Finger
Ace GlassJacket length is measured from the lower shoulder of the bulb to the bottom of the finger. Diameter of tube is 14mm. Used in 6472 Pilot Plant Reactor.
-
-
Adapter, Septum Inlet, Two Ports
Ace GlassSampling adapter with joint at bottom and two septum at top for handling air-sensitive materials. Supplied with two septa.
-
Borosilicate glass addition funnel with integral fritted disc. Has outer top standard taper joint, an inner standard taper joint bottom,a 2mm glass stopcock arm at top and a 0-4mm Hi-Vac valve bottom outlet. Ideal for either vacuum or Schlenk lines. Top and Bottom joints are the same size.
-
25mm Blower Mount
Ace GlassAluminum blower mount for connecting 7511 blower to glass manifold. With threaded stock.
-
-
Adapter, Liquid Inlet
Ace GlassWith 24/40 standard taper inner joint and vacuum take-off. Hose connection is size D.
-
Joints, Inner Member
Ace GlassStandard taper joint with reduced tube at both ends. Length of tube below joint is 100mm.
-
Solid, virgin PTFE, standard taper joint inserts for 6472 series flat glass heads. This low profile insert allows for increased working space above the head. The insert is secured to the head with a reverse threaded locking nut and sealed using a FETFE O-Ring. The top of the insert is formed to…
-
Condenser, West
Ace GlassWith top joint jacketed for water cooling. Jacket length measured from bottom of top joint.
-
Precision ground glass stirring shaft with attached vanes, 10mm. For use when agitation and gas introduction are desired at the same time. Agitator will fit through a 45/50 joint. Designed for use with our 9523 Trubore bearing and 9443 or 9446 mini-lab flask heads. Introduced gas exits the hollow…
-
Hydrogenation/Gas Apparatus I
Ace GlassParr Model 3911 Hydrogenation unit for working volumes of 1ml to 200ml . Ace-thred vessels replace rubber stoppered vessels and eliminate cross-over contamination caused by leeching or sample retension. Complete unit includes all adapters needed for the supplied 8648 series bottles…
-
Primarily designed for use with ACE 8051 bearings. The inner tube through which the stirring shaft passes, plus the PTFE O-Ring supplied with each unit, prevents the lubricant or foreign particles from contaminating the flask contents. For replacement PTFE ring, order 8113-89.
-
Vacuum Traps, Threaded
Ace GlassRound bottom with adjustable inner tube and Nylon bushing with FETFE O-Ring. Optional threaded adapters (8746-75 and -78) will allow safe and easy tubing connect-disconnect. Simply attach tubing to serrated end of adapter, then connect adapter via 7506 bushing to inlet and outlet of trap. Serrated…
-
Distillation Apparatus, Cyanide
Ace GlassCyanide distillation apparatus used in testing for soluble and insoluble cyanides in water. Apparatus basically conforms to ASTM D-2036 except for modifications involving Ace-Threds and larger joints. Also available with threaded adapter to connect still head to trap. PTFE ferrules are supplied in…