Vacuum Trap

Compare Tool

Select up to 3 products

Vacuum Trap
1 - 32 of 158
Sort
View
Show
  • Vactrap™ Vacuum Trap System

    Foxx Life Sciences

    …most advanced vacuum trap system. Ideal for protection of vacuum lines and scientists alike, Vactrap safely contains waste from supernatant removal, chemical separation, and cell or tissue culture media aspiration. Best of all, Vactrap comes ready to use--simply attach to your vacuum and begin your…

  • Two-Piece Vacuum Traps with Hose Connection

    Wilmad-LabGlass - SP Scienceware

    These borosilicate glass vacuum traps have a Standard Taper joint to ease disassembly and allow cleaning/draining. The sidearm 3/8" hose connectors are 180° apart with a bent top stem and provide an easy connection when using rubber tubing. See LG-11020 for body only.

  • Similar to CG-4515 traps but having an o-ring joint to connect the trap body to the stopper. O-ring joint provides for a vacuum tight, grease free seal and permits the trap body to be easily disconnected from the stopper for cleaning. Serrated hose connections are 13.5mm at the smallest serration…

  • Vacuum trap system protects gauge heads, like our 14034, and pumps from corrosive vapors and particle fouling. System consists of a Dewar flask, cold trap and inlet arm. High-vacuum stopcocks are used throughout. Gauge & inlet arm are Ace-Thred connections. Pump & manifold connections are o-ring…

  • Vacuum Trap Assembly, Dual Joints: #15 O-ring, with high vaccum valves

  • Vacuum Trap, Hose Connections Available in multiple sizes with various joint sizes, diameter, length, and inner/side tube size.

  • Vacuum Trap, Large Volume Capacity: 500 and 1000mL available.

  • Vacuum Trap, Cylindrical Available in multiple sizes with various joint sizes, diameter, length, and inner/side tube size.

  • Vacuum Trap

    Ace Glass

    Same as 8750 except top is bent in line with side tube.,/p>

  • …advanced vacuum trap system. Ideal for protection of vacuum lines and scientists alike, VactrapXL safely contains waste from supernatural removal, chemical separation, and cell or tissue culture media aspiration. Best of all, VactrapXL™ comes ready to use; simply attach to your vacuum and…

  • Vacuum Trap with #15 O-ring joint Features 0-12mm high vaccum valve as the shut off. Connection is made via a 57mm O-ring flat flange. Length below flange is 300mm. Steel Clamps sold seperately.

  • Scienceware® Vacuum Traps

    Bel-Art - SP Scienceware

    Vacuum trap and cap are made from corrosion and chemical-resistant polypropylene to provide ideal protection of vacuum sources from contaminants. Tube volume is 100mL; measures 32 x 160mm L Pressure-fittting cap features an inlet and outlet to fit 7.9mm (5/16") ID tubing …

  • Trap connects in series with a freeze dry system or vacuum evaporation system and vacuum pump to prevent contaminants from migrating into the vacuum pump. An insulated well, when dry ice and solvent are added, cools to approximately -75° C (-103° F). When used alone, Dry Ice Secondary Trap

  • Two-Piece Vacuum Traps with Straight Top Stem

    Wilmad-LabGlass - SP Scienceware

    Made of borosilicate glass, these vacuum traps consist of two pieces with a straight top stem. Both inlet and outlet stems are integral with the stopper. Body and stopper are connected by a full length Standard Taper joint.

  • Vacuum Trap Com Size 21

    DWK Life Sciences (Kimble)

    Outlets are 180º apart for easy installation into a variety of vacuum systems. Protects the mechanical pump from attack by corrosive vapors which can be condensed by using liquid nitrogen or dry ice/slurry mixtures. Two-piece construction allows removal of condensate.

  • …Rotavapor® R-100. The ready to use vacuum pump will be delivered with a silencer and 2m of vacuum tubing. All Models Capacity, Final Vacuum 1.5 m3/h, 10 mbar 1190U86 Condensation assembly: Secondary cold trap Vacuum Controller: I-100 (Manual, Timer) Woulff…

  • Vacuum Trap

    Ace Glass

    Vacuum trap with joint to facilitate cleaning. Available modified with top tube bent in line with side tube, but in opposite direction.

  • Two-piece vacuum trap with #15 o-ring joints on both the inlet and outlet ports. The seal between the trap stopper and body is made with a 57mm flat o-ring flange for total grease-free operation when used with either the AF-0060 or AF-0061 manifolds. Trap body is 57mm OD x 300mm in length to be used…

  • Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.

  • …for use with PTFE Ace-Safe connectors to allow safe easy tubing connect-disconnect. Simply attach tubing to serrated end of adapter, via bushing/connector to inlet and outlet of trap. Unmodified version NOT supplied wtih adapter. Complete item consists of body, inner tube, and Nylon bushing.

  • …inserts without removing trap from vacuum system 4.5 inch trap serves vacuum pumps up to 100 Lpm (4 CFM); 9.5 inch serves pumps ranging from 150 to 500 Lpm (5-15 CFM) Filter element is copper gauze with large surface area to trap particles and oil vapors Two size traps offer two connections…

  • Vacuum Trap

    Ace Glass

    Used for freezing out undesired vapors in the vacuum system and also for use in conjunction with Dewar flasks.

  • …International 500mL glass trap for Ai 2nd Gen T40 -40°C UL/CSA certified cold traps. Upward hose barb ports give you safer and easier vacuum tubing connection and removal. Attention! This new glass trap ONLY fits our new 2nd Gen UL/CSA certified T40 -40°C cold traps (released 9/2018).

  • SYNTHWARE Vacuum Trap

    Kemtech America

    For use with vacuum manifolds having 35/20 socket joints. Please order the pump adapter and socket clamp separately.

  • Aspirator with Trap Flask

    Grant Instruments

    The aspirator with trap flask FTA-1 with a 1L trap flask is designed for the aspiration or removal of any remaining alcohol or buffer from microtest tube walls during DNA / RNA purification and other macromolecule re-precipitation techniques. An ideal personal tool for independent operation…

  • …contaminant effects to maintain high vacuum performance. Use of a cold trap is recommended to protect the pump and enhance vacuum levels. Do not operate continuously at pressures greater than 10 torr. DuoSeal two stage pumps provide deep vacuum (1 X 10-4 torr) at pumping speeds ranging…

  • Twin chamber vacuum trap for double protection against undesired vapors in a vacuum system. Trap can be used in a two liter Dewar flask such as 12540-07. Distance from outside of one body to outside of other is approximately 97mm; height is 250mm. Inlet and outlet have serrated fittings; O.D. of…

  • Scienceware® Vacuum Aspirator Bottle

    Bel-Art - SP Scienceware

    The Vacuum Bottle Trap is a useful tool for easy and continuous liquid aspiration with vacuum when aspirating tissue culture media, wash solutions, supernatant fluids after centrifugation, chemical waste, etc. The Aspirator Bottle safely retains up to 1600 mL (54 oz) of fluids while the…

  • Vacuum Trap Kit with Spherical Joints. Includes trap body, top adapter, middle adapter, bottom adapter, and clamps. Body OD: 50mm, Body Length: 360mm

  • …including the diaphragm and valves are PTFE. Vacuum level regulator and built-in dial guage allow easy control of pressure to prevent sample bumping or foaming. Switchable gas ballast inhibits vapor condensation inside pump heads. An inlet separator traps ejected condensed solvent vapors. A…

  • Thomas No. 1166W00 Trap, stopper, vacuum, bent vertical tube, 29/32 Thomas No. 1166W01 Trap, vacuum, complete, bent vertical tube, 29/32, 32mm od outer²body, 13mm od inner/side tube,body length 250mm below joint Thomas No. 1166W02 Trap, stopper, vacuum, bent vertical tube,…

  • 1229D81 - Buchi V-850/855 Vacuum Controller Valve combined with condensate trap and non-return valve with attachment for Rotavapor (not necessary with V-700/710 in stand-alone systems). 1229D82 - Buchi RC-81 remote control can be used to control the vacuum controller and the Rotavapor:…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.