Ace Glass, Bottles
-
Manifold, Tip-Off
Ace GlassUse to tip-off NMR tubes by inserting in lower Ace-Thred port and tightening via bushing. Vacuum line is connected to side hose connection. Tube is then tipped-off with flame. Aluminum shield helps retard heat transfer. Each port individually controlled by smooth acting, semi-needle, threaded PTFE…
-
Stopper, Glass
Ace GlassGround glass stopper for 7/10 or 14/20 joint, for use with microscale equipment.
-
Bottle, Gas Washing, Ace Thred
Ace GlassNew design gas washing bottle with the convenience of Ace-Threds. Center washing tube fits into borosilicate glass bottle via #25 Ace-Thred with nylon bushing and FETFE o-ring. Washing tube has #7 Ace-Safe inlet/outlet ports with 1/4-in hose connection
-
Funnel, Powder Dispensing
Ace GlassSide operated screw feed instrument for addition of powders and solids, up to 25 mesh, to reactions without problems of seizing or binding. Features a flexible PTFE screw thread wrapped on a precision PTFE-ceramic shaft and contained within a precision bore housing.This offers a unique flexibility…
-
Cap Stopper, Micro
Ace GlassWith 14/10 outer joint externally threaded for making O-RING-CAP-SEAL connection with mating inner joint. Supplied with cap and O-Ring. For replacement caps, see 9590-46; for O-Rings, see 7855-720.
-
Septa, Gray Silicone
Ace GlassSepta, gray silicone, 3mm thick. Code -06 used with #7 Ace-Thred, code -10 used with #11 Ace-Thred. Supplied 12 per package.
-
A small, low holdup automatic head which can be completely disassembled for easy cleaning or replacement of parts. Lower column joint and side arm for condenser are 24/40. Joint on takeoff arm is 28/11. The plunger guide is 19/38 and the 10/30 thermometer joint may be used with our 8314 product…
-
500mL Porosity C Wash Bottle
Ace GlassWith fritted disc. Joint is 29/42 for all sizes. All porosities of a given size are priced the same. Inlet/outlet arms are 8 mm O.D.
-
Bottle, Solution, GL120 Threaded Neck
Ace GlassGlass bottle with large, 106mm (4.2") ID opening and GL120 thread. The 9.5 liter and 13.25 liter sizes are bottle shaped. The 19 liter and 45.5 liter sizes are similar in design to a carboy. 7622-155 PTFE cap with CAPFE o-ring is sold separately.
-
Manifold, Vacuum
Ace GlassAll-glass-and-PTFE vacuum manifold with three, four or five stopcock ports. Each port is a variable opening, 0-10mm, high vacuum threaded stopcock. Plugs are PTFE with Nylon or PTFE handles and FETFE O-Rings. Ultimate vacuum of 10-7 can be realized with O-Rings as supplied. For bakable systems,…
-
Air Sampling Manifold
Ace GlassStraight sampling manifold, available with one end threaded, the other end reduced for use with 7506 bushing, or both ends threaded for use with either 7506 bushing or 5841 coupling. Also available with adjustable depth, threaded sampling ports for use with up to 7mm O.D. tube. Code identifies I.D.…
-
-
-
Bottle, Solution, Plastic Coated
Ace GlassSolution bottles with serrated vacuum take-off. Bottles are coated to neck with plastic safety coating. This translucent coating forms a protective film around the glass that will help contain both flying particles and dangerous chemicals should the gl
-
Plug, Nylon, HDPE or PTFE, Front seal
Ace GlassA front-seal, solid plug for sealing column ends. Supplied with one FETFE o-ring.
-
Bottle, Solution, Plastic Coated
Ace GlassCoated to neck with PVC safety coating to reduce potential breakage and exposure to laboratory personnel when handling hazardous material. Carboy style bottles with sloping shoulders. Necks are tooled for uniform fit with stoppers. Uses No. 12 stopper
-
Septa
Ace GlassThe Ace Glass septa is made from strong glass that provides added durability. septa is used mainly for minimizing pain and inflammation in the injured areas while performing surgical procedures.
-
Carb Octopus Air Sampling Manifold
Ace GlassThe vertically mounted Carb Octopus air sampling manifold design features an inner tube which allows condensation to drip to the collection bottle and away from the #7 Ace-Thred instrument ports. Available in standard 4 or 8 port configurations.
-
Tube, Aviation Freeze Point
Ace GlassThomas No. 1166P43 #3 rubber stopper w/holes Thomas No. 1166P44 Aviation frz/pt tube
-
Funnel, Powder Dispensing, Vertical
Ace GlassA vertical, compact screw feed instrument for addition of powders and solids, up to 25 mesh, to reactions without seizing or binding. Features a flexible PTFE screw thread wrapped on a precision PTFE-ceramic shaft and contained within a precision bore
-
Tube, Test, Stoppered
Ace GlassTest tube with interchangeable stopper; 24/40 stopper is hollow, other two solid.
-
Drying Assembly, with Aluminum Holder
Ace GlassOriginally used for Lyophilizing and storing frozen slices of tissue for quantitative histochemistry (see O.H. Lowry, Journal of Histochem. & Cytochem., I, 420, 1953). More recently, used as a vacuum tube with aluminum holders by Nelson & Wakefield, Journal of Neuropathology & Exper. Neurology,…
-
Funnel, Powder Dispensing
Ace GlassSide operated screw feed instrument for addition of powders and solids, up to 25 mesh, to reactions without problems of seizing or binding. Features a flexible PTFE screw thread wrapped on a precision PTFE-ceramic shaft and contained within a precision
-
Borosilicate glass bottles with tooled neck to accept a #6 Rubber stopper. Bottles are epoxy coated to help prevent scratching. Bottles and stoppers sold separately. Working capacity is 1/2 actual capacity. Rated at 60 psi @ 20°C.
-
Walters Manifold
Ace GlassHign vacuum manifold systems feature Easy Action PTFE stopcock valves providing for greaseless operation. Double-tube codes -50 & -54 feature Ace-Threds and 8mm OD tube-end ports. Double tube code -52 features hose barbed connections and 45 degree port placement. Walters manifold, code -40,…
-
Heavy wall glass storage bottles with #15 Ace-Thred are intended only for storage of low-boiling liquids at room temps or at not less than -20°deg;C. Designed to resist internal pressures up to 100 psi, as low as -20°deg;C. The low pressure rating based primarily on the rating for PTFE…
-
Bottle, Specific Gravity, Calibrated
Ace GlassGuy-Lussac type calibrated and engraved. Comes complete with stopper and bottle.
-
Stopper, Michel-Miller
Ace GlassPrecision made PTFE stoppers for use at either end of the 5795 Michel-Miller, 5820 Columns or all 7644 Ace-Threds when a leaktight seal without the use of O-Rings is desired. Use 5846- 52 and 7855-829 for #50 size.
-
Manifold, Pressure Relief, Pilot Plants
Ace GlassComplete inlet and outlet manifold set for use with 10L to 20L flasks with 1in beaded pipe connections, 10PSI relief pressure, M16x1 circulator connections.
-
-
Chemically resistant and stable laboratory bottles, approved for use vacuum or pressure. rated at -1 to +1.5 bar, (-14.5 to +21.7PSI). Bottle only with blue graduations, without cap or pour ring. For cap and ring see 7622. Available clear, amber or plastic coated. Temperature range up to 140°…
-
Bottle, Gas Washing
Ace GlassLarge disc size provides greater capacity. 125mL size has a 25mm fritted disc.The 250mL and 500mL sizes are fitted with a 30mm disc. Joint is 40/35. All porosities of a given size are priced the same. Inlet/outlet arms are 8 mm O.D.