Aluminum Heating Blocks

Compare Tool

Select up to 3 products

Aluminum Heating Blocks
1 - 32 of 66
Sort
View
Show
  • Radley Heat-On™ Blocks

    Heidolph

    …when heating. Therefore, scientists are increasingly turning to specially designed aluminum blocks located on stirring hotplates to heat standard round bottom flasks. All Heat-On blocks are manufactured from solid aluminum providing excellent, even heat transfer to the entire block, preventing…

  • Aluminum Heating Blocks

    DWK Life Sciences (Kimble)

    Ideal for use in place of a sand bath in microscale experiments. Excellent heat transfer Does not interfere with magnetic stirring

  • Blocks for Thermolyne Dri-Baths

    Barnstead

    Aluminum alloy blocks, overall 4" x 3" x 2" high. Each block has a single, smaller bore well for thermometer; number of tubes and diameter shown below.

  • Thomas Blocks and Accessories For Analog And Digital Dry Block Heaters

    Thomas®

    …solid anodized aluminum block, the close contact of tubes to block walls allows for maximum heat retention. Single block. Combination Blocks (5890J49, 1231R89, 1231R90) These blocks have been designed for variable sized samples. Constructed from a solid anodized aluminum block, the close contact…

  • Blocks For Dry Bath Incubators

    Boekel

    …dry block heaters Machined and fabricated from solid aluminum Anodized to resist oxidation Rows and columns are labeled on appropriate blocks for easy vessel identification Each block module measures 3" x 3 3/4 " x 2". See Thomas numbers 5152M65 to M75 for additional blocks.

  • Lab Armor Bead Block - Single

    Shel Lab

    An Aluminum Single Block filled with Lab Armor Beads. Capacity: 0.25L and 0.50L of Beads, Thermal Uniformity: 'At 95°C to +/- 1.0°c w/Lid. LxWxH: 3.25 x 2.5 x 2.5 inches (8.4 x 6.4 x 6.4 cm). Variety of Colors.

  • EchoTherm™ IC22 Digital, 2-Position Electronic Chilling/Heating Dry Baths

    Torrey Pines Scientific

    …(7.3 cm) x 4.375" (11.1 cm) aluminum plates that are very flat for optimal contact with the sample blocks. When unloaded, the plates will reach below 0°C in under two minutes. They will heat to 37°C in under a minute. The chilling and heating rates will change with loads. For…

  • Digital Dry Baths/Block Heaters

    Thermo Scientific

    …calibration enables to offset the temperature to desired value Timer allows the user to accurately monitor the heating time Wide range of interchangeable aluminum alloy heat blocks provide versatility and allow for easy cleaning and disinfecting Powder-coated steel body construction ensures…

  • Instatherm Blocks

    Ace Glass

    Aluminum insert for our 1200ml, Ace 9601-16, Instatherm oil bath. Combine the rapid and precise temperature control of Instatherm with the safety of aluminum heating blocks. You may stir using a hot plate stirrer, however do not apply heat to the bath. See our 9600-20 complete heating system which…

  • Incublock™ Microtube Incubators, Digital IncuBlock™ for 4 blocks, without blocks

    Denville

    …to sample tubes is improved, because the aluminum blocks have cavities that are precision machined to match the conical shape of 1.5ml and 0.5ml microcentrifuge tubes. Available in a single or double block version, each unit is supplied with a screw thread block lifter for easier transfer.

  • Interchangeable Module Blocks

    Barnstead

    For use with 5891B10 and 5891B51 series heater blocks Anodized aluminum construction Heat uniformity is provided by the anodized aluminum construction and the close contact of the test tubes with the block walls Fit a variety of test tubes and other containers Dimensions (W x L…

  • Block, Module, 20 X 13.75mm Well, 4.5mL

    Barnstead

    • Solid anodized aluminum blocks resist the harshest environments and provide maximum heat retention. • All blocks include thermometer well for easily measuring block temperature. • Fit all Barnstead Thermolyne brand modular block dri-baths. • Max Tube Size: 13.75 mm • Number of Wells: 20

  • DK Series Kjeldahl Digestion Units

    VELP

    …protein determination, with an aluminum heating block that offers an excellent thermal homogeneity, with a maximum working temperature of 450°C. High Performance Excellent thermal homogeneity High temperature stability with aluminum block Good repeatability of temperature…

  • Dynabloc, Heating Blocks for Vials & Tubes

    Ace Glass

    …To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09 T-handle extractor. Accessories include PTFE clamps and aluminum support rods. Blocks and base plates are anodized aluminum.

  • Dynabloc, Heating Blocks for Flasks

    Ace Glass

    …To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09 T-handle extractor. Accessories include PTFE clamps and aluminum support rods. Blocks and base plates are anodized aluminum.

  • Dynabloc, Segmented Heating Blocks for Vials & Tubes

    Ace Glass

    Three segment, anodized aluminum, heating/mixing blocks hold up to three different size and type of vessels at the same time. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09…

  • Polarsafe™ Cooling Blocks

    Argos Technologies

    Polarsafe™ Cooling Blocks are perfect for the utmost in temperature control for precious laboratory samples. These electric blue aluminum blocks are anodized to stand up to cold temperatures. Uniform well construction provides inserted tubes with a snug fit and a highly efficient degree…

  • Digital Dry Bath and Blocks

    Crystal Technologies

    …temperature distribution on the thermal block. These Digital Dry Baths are ideal tools for a wide variety of life science, clinical and general chemistry applications. Microprocessor controlled with digital display High quality aluminum block and heating elements provide good temperature…

  • Heating Shakers

    Lab Companion

    …touch buttons Its polypropylene main body is highly chemical-resistant and easy-to-clean Optimal heat transfer is achieved by the tight coupling design of the main body and the corrosion-resistant anodized aluminum blocks Low-profile design with rubber feet for minimal vibration and noise

  • Heat Transfer Block - Microscale

    Ace Glass

    Aluminum heat transfer block, 9594-12 for use in place of a glass sand bath in Microscale experiments. Offers excellent heat transfer and will not interfere with magnetic stirring. Block has four holes for vials and one hole for thermometers. 9594-16 for use on top of stirrer-hot plate to effect…

  • Radleys Starfish Multi-experiment Heating And Stirring Workstation

    Heidolph

    …biochemistry and analytical chemistry. All StarFish base plates and blocks are made from anodized aluminum, which provides excellent heat transfer. Precision manufacturing also ensures excellent contact between the blocks and the base plate. StarFish can be used for all types of chemical…

  • Analog Dry Block Heaters

    Ohaus

    …and PCR strips or tubes. Each block has a thermometer well for measuring block temperature. Anodized aluminum modular blocks provide superior temperature stability and heat transfer. Heaters require OHAUS modular heating blocks for operation. Modular blocks are sold separately . Operating…

  • Dri-Block Dry Heat Baths

    Techne (Bibby Scientific US)

    For precise temperature control; ±0.1°C Provide a safe, dry, constant temperature source in the laboratory for the purpose of incubation, boiling, inactivation, wet ashing, enzyme analysis, and a variety of clinical and industrial applications. NOTE: aluminum insert blocks are not included.

  • Reacti-Therm™ Dry Block Sample Incubation System

    Thermo Scientific

    …Dry Block Sample Incubation System. It features Reacti-Therm Modules that utilize dry block heaters to provide uniform, stable heating with a temperature range of 10–200°C. The Reacti-Therm Dry Block Sample Incubation System is available in four models—single block and triple block

  • Aluminum Bead Bath 0.25L

    Labconco

    Blue anodized aluminum blocks hold tubes of various sizes in an aluminum bead bath Aluminum construction promotes the conduction of heat or cold from the Temp-Zone area to help maintain sample temperature Beads sold separately

  • Aluminum Bead Bath Xl 0.5L

    Labconco

    Blue anodized aluminum blocks hold tubes of various sizes in an aluminum bead bath Aluminum construction promotes the conduction of heat or cold from the Temp-Zone area to help maintain sample temperature Beads sold separately

  • Dry Bath Accessories

    Torrey Pines Scientific

    Precision machined from solid aluminum Black anodized to transfer heat better and to protect blocks from spills. The bottoms of the blocks are machined to “nest” on the EchoTherm™ Heater/Chillers and Electronic Ice Cube™ Chiller to prevent movement.

  • Multi-Use Well Plate/Tube Rack

    Labconco

    Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Weight: 5.0 lbs Weight metric: 2.3 kg Dimensions: 6.0" x 8.0" x…

  • Rack Tube Conical 50mL 28mm 4 Pos

    Labconco

    Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Rack holds 4 conical 50 mL tubes

  • Rack Tube Conical 15mL 16mm 12 Pos

    Labconco

    Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Rack holds 12 conical 15 mL tubes

  • Rack Tube 15mL 16mm 12 Pos

    Labconco

    Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Rack holds 12 round 15 mL tubes

  • Rack Tube Flat 50mL 28mm 4 Pos

    Labconco

    Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Rack holds 4 flat 50 mL tubes

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.