Ace Glass, NEW! Life Science
-
1mL Tissue Grinder, Dounce Type, Glass
Ace GlassThe Dounce type, glass tissue grinder is supplied with two glass pestles; one with a tight inner tolernace and one with a loose inner tolernace. The loose pestle can be used for initial reduction of the tissue sample and the tight pestle can be used to fine grind the tissue and complete the homogenation.
-
Condenser, Liebig
Ace GlassWith straight inner tube sealed through the jacket. This condenser is acceptable for use with Abderhalden or Mini-Lab moisture test apparatus.
-
Condenser, Friedrichs
Ace GlassWith molded spiral condensing surface and standard taper 24/40 inner joint at bottom. Top tubulation tooled to take No. 3 stopper. Jacket length 250mm. Hose connections are size D.
-
This electrically insulated 25 gauge nichrome wire can be wound closed or open spaced. Max.temp 594 degreeC. The wire is approx. 1mm in diameter and has a resistivity of 2.1ohms/foot at 20 degree C; maximum ampere rating in open air at 594 degreeC is 3.7amps. The amperes are derated when enclosed…
-
76cm Safety Shield
Ace GlassWeighted, all transparent safety shield for laboratory worker protection. Polycarbonate shield is 4.7mm(3/16") thick. Three-sided construction provides stability and protects personnel from front and sides. Heavy steel perimeter base is 25mm x 48mm (1" x 1 1/2"), coated with green…
-
Extraction Apparatus Liquid-Liquid
Ace GlassDesigned for U.S.E.P.A. Priority Pollutant analysis using Method 625 (base neutrals/acid extractables). Accommodates 1L sample and approximately 200mL of a heavier-than-water extracting solvent. Features an extractor body designed to accept a common condenser with a 45/50 joint, a 24/40 opening…
-
High performance, non-packed, low pressure liquid chromatography columns, epoxy-coated. Simple to assemble, PTFE (no O-rings), safe operation to 150psi with safety shield. Usable with various packing materials chemically inert, zero dead volume, leak free. For analytical or preparative…
-
By closing stopcock, serves as a reflux condenser; open serves as a still head for Claisen type distillation. Top joint can be used for thermometer or cold finger condenser insertion. Side vent enables head to be used in vacuum distillation. Jacketed section 140mm.
-
Rapid Preparative Chromatography System
Ace GlassRapid preparative chromatography system suitable for use to pressures of 50 psig, operation behind a shield is recommended. Resevoir is 2L or 3L capacity, epoxy coated and pressure tested. Complete item includes:Brass or glass manifold, pressure gauge, pressure relief valve, column, tubing, and…
-
Simple absorption column for rapid preparative separations with moderate resolution. Modified with a #25 Ace-Thred connector in place of 35/20 joints, for grease free connection. Internally threaded connector & Nylon bushing make a pressure-tight, O-Ring compression seal with glass stem on…
-
Support Rods Stainless Steel
Ace Glass303 stainless steel support rods, 13mm (1/2") O.D. for use in place of aluminum or fiberglass. For use with all standard laboratory connectors.
-
Sublimation Adapter, Adjustable
Ace GlassMicroscale sublimation adapter with vertically adjustable condenser tube that allows use with 3 mL, 5 mL, and 10 mL microscale vessels. Two-piece adapter features a #7 Ace-Thred at top of vacuum adapter that, with Nylon bushing and O-Ring, forms a compression seal with condenser tube, bottom 14/10…
-
Simple absorption chromatography column for rapid preparative separations with moderate resolution. Allows separations of samples from 0.01 to 10.0g in 10-15 minutes. Column and reservoir, only, are Epoxy Coated. Reservoir connects between column and flow control adap-ter. Joints on column,…
-
Clamp, Two-Piece, Reaction
Ace GlassTwo-piece clamp joins head to flask on 6469 portable reactor assemblies.
-
Instatherm Desicator, Vacuum Oven
Ace Glass250mm dia with bottom Instatherm® heated,(low voltage: 40 volts, 10 amps max.) Top is not heated, but has insulation cover. May be used as a vacuum oven at temps up to 180 degrees C continuously. The top has an observation stripe for visibility & is supplied with vacuum take-off valve. Uncoated…
-
Expansion Tank, Rotary Evaporator
Ace GlassBorosilicate glass expansion tank for large scale rotary evaporators. This fits easily into model R220 rotary evaporators. The tank is part of all D Series glass sets. Available in either safety coated or plain versions. Inner DN ball joint inlcudes a size -225 CAPFE o-ring.
-
Chromatographic column with integral reservoir and #15 Ace-Thred at top, and 2mm bore 1:5 taper PTFE plug at bottom. Column supplied with 7506-06 Nylon bushing and FETFE O-Ring. Complete item consists of column with bushing and O-Ring, and 5853-07 Tubing Connector for connecting 12.5 to 14mm O.D.…
-
Pipet, Dispensing, Automatic
Ace GlassFills and pours automatically, rapidly. One head for all capacities, all volumes. Short tipping angle, interchangeable volumetric bulbs give reproducable volumes. Bulb joint is 14/20, head and flask 29/42. Complete apparatus consists of head, flask, volumetric bulb, clip, two 19mm (3/4-in) springs,…
-
Vigreux Distilling Column
Ace GlassWith male drip tip on joint of Claisen side arm and 10/30 joint for 25 mm immersion thermometer. Other joints are 14/20.
-
Condenser, Graham
Ace GlassWith standard taper 24/40 outer joint at top. Hose connections are size D, for 3/8in ID tubing.
-
Powerstat Mounting Bracket
Ace GlassMounting bracket permits easy and convenient mounting of 12080 or 12081 Powerstats on standard laboratory racks or stands having up to 16mm O.D. rods. Made of strong, rust and corrosion resistant aluminum alloys. Bracket is attached to the bottom of the powerstat by two screws and to the rack or…
-
Used with Pressure Reactors, listed in Reaction Section. Heavy wall condenser has a #15 Ace-Thred at top that can be stoppered using 5846 Plug, not supplied. Bottom drip tip is long enough to be secured in the #15 Ace-Thred on 6433 Reactor Head, One-Piece Pressure Reactor or any vessel with a #15…
-
Distilling Column
Ace GlassVacuum jacketed and silvered with observation stripe. Also available unsilvered. With an enlarged bulb knockdown section that removes high boiling ends without choking. Length of packing section is 100 or 200mm, I.D. approximately 10mm. With indents to
-
Clamp, Reaction Flask, One-Piece
Ace GlassOne-piece clamp for securing flat flanges as found on our 6504,6511 & 6516 reaction kettles. Powder coated, high strength aluminum clamp features three brass, stainless steel spring-loaded lugs with nylon knobs which quickly secure the assembly when pi
-
Instatherm Blocks
Ace GlassAluminum insert for our 1200ml, Ace 9601-16, Instatherm oil bath. Combine the rapid and precise temperature control of Instatherm with the safety of aluminum heating blocks. You may stir using a hot plate stirrer, however do not apply heat to the bath. See our 9600-20 complete heating system which…
-
Condenser, Triple Coil, High Capacity
Ace GlassHigh through-put, high capacity triple coil condenser has even higher capacity than double coil or rotary evaporator type condensers. Unit is designed with three internal coils for processing large volumes of cooling water and large volumes of material
-
With water cooled standard taper 24/40 inner and outer joint at bottom and top. Hose connections are size D.
-
Stainless steel, four post support stand for large scale chromatography columns. Each stand is designed to fit either 24", 48" or 72" length glass columns. Each stand has a PTFE collar at the bottom and an adjustable stainless steel collar at the top to support the column. All stands have locking…
-
Condenser, High Capacity, Double Coil
Ace GlassHigh through-put, double coil condensers are designed to fit larger systems and pilot plant reactors. The design is similar to a rotary evaporator type condenser, where large volumes of material are being condensed at high temperatures and where large
-
Coupling, Michel-Miller
Ace GlassPrecision made PTFE coupling with 316 stainless steel liner for connecting Michel-Miller, or 5820 columns when packing. Designed to make a leak-tight seal without the use of O-Rings. Simply tighten until white ring appears indicating a seal has been made, secure locknut; no need to tighten further.…
-
Replacement condenser for Buchi rotary evaporators. Available plain or safety coated. Includes PTFE hose barbs,GL caps and plug.
-
Liquid-Liquid Extractor
Ace GlassFor extraction with liquids of lighter density than liquid extracted such as water with ether; 9422 and 9414 are used with extraction flask 9451.
![Site Search powered by SLI Systems](http://assets.resultspage.com/logos/sli_logo_2014.png)