SP Bel-Art, Bottles
-
Dry It - No Matter How Much Space You Have Small, compact footprint enables placement where it is needed most Dries labware quickly by providing continous warm air circulation High storage capacity to accommodate up to 76 peg positions for all types of labware Selector knob allows…
-
Bel-Art® Poxygrid Test Tube Racks
SP Bel-ArtChoice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…
-
Sterileware Flat Bottom Scoop
SP Bel-ArtThese sterile scoops are used by pharmaceutical, food, cosmetic and chemical companies for general production or laboratory work. Handle bump acts as thumb rest to help keep the hand away from the scoop; reduces contamination risks Flat bottom allows for use as a weigh boat Approximate…
-
Scienceware® Safe-Lab® PTFE Stoppers
SP Bel-ArtSimilar to 8771R10 series, but in standard taper joint sizes Conforms to ASTM Standard E 675 Use with boiling and distilling flasks
-
Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…
-
Labeled with bold, eye-catching letters for safe and positive identification of common laboratory solutions Standard diamond alert symbols indicate the type of hazards the contents may present; CAS numbers are included where appropriate Permanent, colorful silk-screened labels put an end to…
-
Poxygrid® 50mL Centrifuge Tube Racks
SP Bel-Art50mL Multiple Tube Holders Made of epoxy-coated steel wire, these racks hold up to thirty-six 50mL centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223°C…
-
Sterileware Volumetric Sampling Spoons
SP Bel-ArtSuitable for use with powders, granules, liquids, gels or suspensions, these sterile spoons allow set volumes to be accurately measured and sampled. Leveling to top of bowl provides accurately measured samples Made from FDA and EU conforming materials; safe for food, drug and cosmetic use …
-
Heavy duty bars for use in stirring large volumes of fluid in vessels on large magnetic stirring machines such as the Cool Stir Large Volume Stirrer, H37028-0001 or other large machines. Will fit into vessels with a minimum neck diameter of 32 mm Multifaceted surface adds turbulence…
-
Scienceware® Stainless Steel Spoons
SP Bel-ArtDouble-Ended with Two Bowl Sizes These double-ended, 304 stainless steel sampling spoons have a solid, rounded shaft. Available in plain polished stainless steel or coated with Fluo-Kem® Teflon® FEP FEP complies with FDA regulations governing direct food contact applications
-
Scienceware® Economy Dippers
SP Bel-ArtFor convenient sampling from tanks, vats, streams, ponds, lakes, etc., these economy dippers are lightweight, easy to use and portable. Thread on 500mL (16 oz.) polypropylene cup can be exchanged to reduce cross contamination Two pouring spouts on cup allow left or right pouring …
-
Scienceware® Radioimmunoassay Tube Racks
SP Bel-ArtOrganize over 100 samples in one rack Polyethylene racks provide practical methods of pipetting and storing a large number of samples Using alternate rows and rotating tubes makes it easy to keep track of the last tube filled Can be used in clinical labs for storage of samples Steam…
-
Double Bagged Long Handle Sampling Spoons
SP Bel-ArtThe long handle on these spoons enables users to reach into jars, bottles and other confined areas to minimize the potential of personal contact with sampled material. Ten individually packaged scoops are sealed in an outer bag to create multiples layers of protection against contaminants and…
-
Low-density polyethylene wash bottles offer different colors of polypropylene closures for quick, at-a-glance identification of contents. Choose from Natural, Red, Yellow, Blue or Green caps.
-
Add the convenience of adjustable spray to your Scienceware® wash bottles. Trigger sprayers with adapters fit any Scienceware® bottle with an easy to fill, 53mm wide closure and offer convenient, adjustable spray dispensing of a wide range of chemicals including bleach, ethanol, machine oil…
-
Acid/Solvent Bottle Carriers
SP Bel-ArtThe 16mm (5/8") opening in the cone design allows a delivery tube to be inserted so liquid does not have to be poured out. The shortened lid allows only the cap of the bottle to protrude for safer pouring. Both carriers hold standard US reagent bottles. Shatter resistant polyethylene…
-
Scienceware® Long-Handled Dippers
SP Bel-ArtFor easy sampling from tanks, vats, lakes, etc., these high-density polyethylene plastic dippers will not rust or corrode, provide excellent chemical resistance and float, “just in case.” Handles are 2.9cm (1-1/8”) in diameter and welded to a rigid sampling bowl at a…
-
Poxygrid® Labware Drain Stand
SP Bel-ArtDry Test Tubes, Beakers, Flasks, and Other Labware For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting. Three rows of epoxy-coated hairpin-loop supports (14 in all)…
-
Scienceware® Mini Sampler Spoons
SP Bel-ArtThese small sampling spoons are ideal for retrieving small, specific volume samples of powders or similar materials. Use a separate spoon for each material sampled to avoid cross contamination Made from white high-impact polystyrene plastic Available in 5 sizes
-
Test Tube Capper
SP Bel-ArtEliminates fatigue and soreness of hands and fingers from the repetitive task of applying test tube caps. Test Tube Capper fits comfortably in the palm of your hand. Use tip to apply pressure and securely cap tubes. Capping can be performed with test tubes in a rack or while being held in…
-
Six different, small size, double-ended tools (150mm long) and a pair of tweezers (145mm long) suit small sample handling needs. Each double-ended tool has two different end shapes providing 12 implements to better match user needs. Two small spoons ends for transferring and collecting both…
-
No-Wire Test Tube Grip Racks
SP Bel-ArtTest Tubes ‘Hang in There’ in Any Position, Even Inverted! Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work. • Fingers allow simultaneous decanting to save valuable…
-
Scienceware® Sample Thief
SP Bel-ArtThis hand controlled tool allows users to take liquid samples at specific depths. Simply place thumb over top hole, insert to desired depth, remove thumb to allow liquid to enter the tube, place thumb back over tube to prevent liquid from moving in or out, and remove. Polyethylene plastic…
-
Scienceware® Large Powder Funnels
SP Bel-ArtHigh density polyethylene funnel is ideal for powders and general use. Extra wide 1-1/2" stem exit allows for extra coarse or clumping powders to easily pass Exceptional chemical resistance to most acids, alkalis and some organic solvents
-
Pipettor Stand-6™ Rack
SP Bel-ArtTransparent acrylic stand stores 6 pipettors ready for use Stores many available pipettors Places: 6 Material: acrylic
-
Dry it - No Matter How Much Space You Have High storage capacity to accommodate up to 114 peg positions for all types of labware Single-sided benchtop models fit against a wall, conserving bench space Double-sided benchtop models provide twice the capacity with a slightly larger…
-
Stainless Steel Coated Lab Spoon and Spatula
SP Bel-ArtThis stainless steel sampling spoon has an anti-stick, corrosion-resistant surface. Fluo-Kem® Teflon® FEP coating complies with FDA regulations governing direct food, drug and cosmetic contact 4mm (5/32”) diameter rod is flattened at one end to give an 8 x 51mm (5/16 x…
-
Poxygrid® 500mL Centrifuge Tube Racks
SP Bel-ArtKeeps 500mL Centrifuge Tubes Upright and Secure This unique steel wire rack allows storage and transport of up to four (4) 500mL conical bottom centrifuge tubes. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature…
-
Wide Mouth Bottles
SP Bel-ArtHigh-density polyethylene bottle with foam lined, white polypropylene cap. Offers excellent chemical and impact resistance Capacity: 4000ml (1 gallon) Closure: 110mm
-
Conical Tube Holder
SP Bel-ArtMove tube and rack with one hand, insert or remove tube from the holder with one hand. Support either a 15 or 50mL conical tube while allowing a view of the tube’s entire contents. Steam autoclavable at 121°C (250°F). Chemical-resistant polypropylene.
-
Poxygrid® 60 & 150-Place Test Tube Racks
SP Bel-ArtChemical and corrosion-resistant steel wire test tube rack is coated with heat-cured epoxy for long life and easy cleaning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range: -223°C (-369°F) to 121°C (250°F);…
-
Color Octagon Spinbar® Magnetic Stir Bars
SP Bel-ArtOctagon magnetic stirring bars with integral pivot ring are the most commonly used shape. Choose from red, yellow or blue. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Interrupted profile provides greater surface area and…