SP Bel-Art, Bottles
-
Poxygrid® Labware Drain Stand
SP Bel-ArtDry Test Tubes, Beakers, Flasks, and Other Labware For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting. Three rows of epoxy-coated hairpin-loop supports (14 in all)…
-
Labeled with bold, eye-catching letters for safe and positive identification of common laboratory solutions Standard diamond alert symbols indicate the type of hazards the contents may present; CAS numbers are included where appropriate Permanent, colorful silk-screened labels put an end to…
-
Scienceware® Stirring Bar Retrievers
SP Bel-ArtEasily recover stirring bars from containers using the Spinbar® Magnetic Retriever. Offered in two different lengths (12" and 18"), each retriever has a polyethylene rod, 9.5 mm diameter, with Alnico magnet sealed in one end and loop on opposite end.
-
Scienceware® Polypropylene Pipet Racks
SP Bel-Art28-Place Holds 28 pipets in vertical position Pipets fit into 2 discs connected by central support column Upper disc has 10 holes, 14 mm in diameter and 18 holes, 11 mm in diameter Lower disc has 28 holes, 4 mm in diameter to support pipet tips Overall height 7"; diameter 7"H …
-
Scienceware® Magnetic Stirring Bar Arrester
SP Bel-ArtPrevents Stirring Bars from Pouring Out When Emptying Containers The Magnetic Stirring Bar Arrester holds your stirring bar in place when pouring from a beaker or flask by placing the arrester against the bottom of the container. 9.5mm (3/8") thick polyethylene 51mm (2")…
-
Poxygrid® 96-Place Test Tube Racks
SP Bel-ArtMaintain the 96-Place Format of High Throughput Applications with Large, 15mL Test Tube Capacity Ideal for mimicking the 96-place format used in microplates, deep-well plates and other tools configured for drug discovery and robotic applications. Flow-through design allows rapid…
-
Scienceware® Flowmi™ Cell Strainers
SP Bel-ArtScienceware® Flowmi™ Cell Strainers provide fast and efficient filtering of small volume samples (up to 1000µl) and are unmatched at preserving sample volume. These sterile, 40µm or 70µm porosity strainers remove cell aggregates and create uniform single cell suspensions…
-
Polygon Spinbar® Magnetic Stirring Bars
SP Bel-ArtThese stirbars have polygon multifaceted surfaces that add turbulence relative to similar smooth size cylindrical bars. Center molded pivot ring minimizes the contact area between the bar and the vessel; reduces friction and chattering Marring of plastic containers is diminished …
-
Spinvane® Triangular Magnetic Stirring Bars
SP Bel-ArtSpinvane® Magnetic Stirring Bars triangular shape is designed for small conical-shaped tubes and micro vials. Triangle shaped vane is made of solid FDA grade, USP Class VI Teflon® and has a cross-mounted, molded-in Alnico magnet Each size is manufactured for a specific size tube;…
-
Poxygrid® 50mL Centrifuge Tube Racks
SP Bel-Art50mL Multiple Tube Holders Made of epoxy-coated steel wire, these racks hold up to thirty-six 50mL centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223°C…
-
Spinring® Magnetic Stirring Bars
SP Bel-ArtSpinring® stirring bars provide maximum stabilization of the magnetic stirring bar with the addition of a removable “hoop” around a standard octagonal bar. Best suited for larger open-neck vessels, such as buckets and beakers Friction fit of the "hoop" and…
-
Low-density polyethylene wash bottles offer different colors of polypropylene closures for quick, at-a-glance identification of contents. Choose from Natural, Red, Yellow, Blue or Green caps.
-
Scienceware® Pipet Support Rack
SP Bel-ArtHolds 12 pipets Polyethylene construction Pipet support rack supports pipets horizontally without putting pressure on fragile tips. Rack holds 12 volumetric or graduated pipets from 1 mL . The polyethylene support measures 241 mm L x 178 W x 292 H (9 1/2” x 7” x 11…
-
Microcentrifuge Floating Racks
SP Bel-ArtCompact and Economical Incubate up to twenty-four 1.5ml microcentrifuge tubes in a water bath. Easy to load Microtubes are held snugly and then released when the rack is pressed down on a benchtop Dimensions: 11.9 x 7.8cm (4-11/16 x 3-1/16")
-
Scienceware® Bulb Pipettor
SP Bel-ArtSaves time and eliminates mouth pipetting Tapered silicone seal provides airtight fit in all pipet sizes Excellent aspirator for use with Westergren or Wintrobe sedimentation tubes. Comes complete with an elastic cord for dedicating pipettor to a specific reagent bottle.
-
Scienceware® Long-Handled Dippers
SP Bel-ArtFor easy sampling from tanks, vats, lakes, etc., these high-density polyethylene plastic dippers will not rust or corrode, provide excellent chemical resistance and float, “just in case.” Handles are 2.9cm (1-1/8”) in diameter and welded to a rigid sampling bowl at a…
-
These egg-shaped stirring bars are designed especially for use in round-bottom vessels as they spin unrestricted by the vessel contour. Particularly well suited for round bottom flasks; shape ensures complete mixing Offers minimal contact when used in plastic containers Egg shape…
-
Scienceware® Round Bottom Flask Support
SP Bel-ArtRound-bottom flasks of any size up to 10 liters are cradled securely in the stepped concentric rings of this holder. Can be stacked together for convenient storage Polypropylene plastic rack; not affected by spilled acids, alkalis or other corrosive liquids Steam autoclavable at…
-
Epoxy-coated steel wire rack holds 15 conical bottom 15mL centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes. Generously spaced for easy handling Heat-cured epoxy coating is unaffected by organic…
-
Poxygrid® "Rack and a Half" Test Tube Racks
SP Bel-ArtFor High Volume Work High quality epoxy-coated wire racks in convenient extra-long sizes for volume test tube work. Epoxy coated steel wire is chemical and corrosion resistant Steam autoclavable at 121°C (250°F)
-
Scienceware® Liquid Sampler
SP Bel-ArtIdeal for viscous liquids, this 50ml (1.65oz) liquid sampler is made for immersion into a can, bottle, tank, vat, etc. Nickel-plated brass cup and tubular handle with finger grips are 45cm (17-1/2") long Center rod with finger ring actuates a valve in the bottom of the cup for…
-
Acid/Solvent Bottle Carriers
SP Bel-ArtThe 16mm (5/8") opening in the cone design allows a delivery tube to be inserted so liquid does not have to be poured out. The shortened lid allows only the cap of the bottle to protrude for safer pouring. Both carriers hold standard US reagent bottles. Shatter resistant polyethylene…
-
Scienceware® 50mL Tube Holders
SP Bel-ArtPolystyrene construction. Leave both hands free for pipetting and other critical tasks Non-Grip Style safely supports a 50ml conical centrifuge tube and permits the tube to freely be removed Grip Style gently grips the tube and moves with the tube when it is lifted from the bench top
-
Circulus™ Magnetic Stirring Bars
SP Bel-ArtCirculus™ Magnetic Stirring Bars offer fast mixing action and strong turbulence as well as greater stability with less drifting at higher speeds. Ideal for containers with round or convex bottoms All sizes have solid FDA grade, USP Class VI Teflon® PTFE end disks 20mm…
-
Polyporpylene Standard tapered stems Steam autoclavable at 121°C (250°F)
-
The multifaceted magnetic stirring bar surface adds turbulence relative to similar size smooth cylindrical stirring bars. Ideal for single use applications mixing radioactive reagents or when cross contamination might be a concern Alnico magnet encapsulated in FDA Grade, USP Class VI…
-
Sterileware Powder Thief
SP Bel-ArtAvailable in two lengths each with four tip volumes, these sterile powder thieves easily sample from targeted locations within bulk powders. Used by pharmaceutical, food, cosmetic and chemical companies. Made from FDA and EU conforming materials; safe for food, drug and cosmetic use High…
-
Scienceware® No-Wire™ Test Tube Racks
SP Bel-ArtGreat alternative to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions…
-
Spinbar® Capsule Magnetic Stirring Bars
SP Bel-ArtThe Capsule Magnetic Stirring Bar is a polystyrene capsule containing a 30 x 8mm (1.18 x 0.31") polygon magnetic stirring bar that spins freely inside the capsule while being prevented from spinning off center and ‘wandering’ on the base of a vessel. Containment of the…
-
Scienceware® Safe-Lab® PTFE Stoppers
SP Bel-ArtSimilar to 8771R10 series, but in standard taper joint sizes Conforms to ASTM Standard E 675 Use with boiling and distilling flasks
-
Autoclavable Rows are numbered and lettered Base plate has rounded wells with drain holes. Molded cutouts in end panels form handles. 9259L10 and L20 are 213 x 110 x 111 mm high; 9259L30 through L50 are 213 x 110 x 127 mm high.
-
Sterileware Pharma Scoops - Red
SP Bel-ArtIdeal for both production work and laboratory use, Pharma Scoops are used by pharmaceutical, food, cosmetic, and chemical companies. Bright red color reduces chance of scoop being left behind in a sample; can serve as code to avoid cross contamination; can provide contrasting background for…