SP Bel-Art, Racks
-
Scienceware® Water Bath Racks
SP Bel-ArtSteam autoclavable at 121°C (250°F). Dimensions 213mm x 110mm (8-3/8" x 4-5/16"). Durable polypropylene rack that sinks to the bottom of a water bath and remains upright when agitated. Height: 111mm (4-3/8"). Height top deck: 57mm (2-1/4"). Places: 72. Rows: 6 x 12. Tube size: 10-13mm.
-
Pipette Tray Rack
SP Bel-ArtThis styrene plastic tray can be used in drawers or on the benchtop for storing pipettes and can also be used for soaking pipettes before cleaning. Scalloped rims hold 16 small or 7 large pipettes Center support holds 12 short pipettes in a perpendicular direction
-
Rotary Separatory Funnel Rack
SP Bel-ArtThis rotary separatory funnel rack consists of a rectangular base, screw-in column and a support disc held in place by a screw clamp. Support disc is fully adjustable for different heights up to 21" Open front type support holes for easy removal and placement of separatory funnels …
-
Scienceware® Microcentrifuge Tube Ice Racks
SP Bel-ArtLower section of these 2-piece racks is a tray for water or crushed ice. Of gray, high-impact styrene. 0210C94 holds 120 tubes under 12 mm diameter and is 16" L x 5-5/8" W x 2-1/4" H; 2591D02 holds 105 tubes under 8 mm diameter and is 8-1/2" L x 4-7/8" W x 2-5/8" H;…
-
24-Hole Scintillation Vial Rack Takes 24 vials up to 30 mm o.d. Autoclavable; non-scratching Molded cutouts in end panels form handles For start to finish preparation Height to top of upper shelf: 44 mm. Overall dimensions: 298 x 127 x 95 mm high. Height to top of upper shelf is 1-3/4".
-
Poxygrid® Labware Drain Stand
SP Bel-ArtDry Test Tubes, Beakers, Flasks, and Other Labware For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting. Three rows of epoxy-coated hairpin-loop supports (14 in all)…
-
Scienceware® Rack, PP, Electrode
SP Bel-ArtRacks hold two rows of four tubes up to 20mm in diameter. Overall dimensions 108mm x 60mm x 121mm high (4 1/4 " x 2 3/8" x 4 3/4 "). Steam autoclavable at 121°C (250°F). Store and condition eight pH, Redox/ORP or ion electrodes in individual test tubes. Polypropylene rack is chemical and…
-
Round Microcentrifuge Floating Bubble Racks
SP Bel-ArtSpecifically designed for incubating 1.5mL microcentrifuge tubes, this rack includes a hold-down disk which maintains a constant pressure on the tube caps and prevents them from opening during internal air expansion. The polypropylene disk with threaded handle screws into the…
-
Slant Racks
SP Bel-ArtThis polypropylene rack has slanted sides to help prepare agar media slants in 13-16 or 16-20mm tubes. Media-filled tubes are autoclaved with the rack in a vertical position; then the rack is positioned to the preferred angle and media allowed to cool and harden. One side is inclined 5° to create a…
-
Switch-Grid™ Test Tube Racks
SP Bel-ArtThis innovative, split-frame rack holds up to two different size tubes in the same rack and allows users to quickly switch grids to hold other sizes as needed. Each rack frame includes a set of grids in one size. Grid sets in alternate sizes can be purchased separately. 10mm to 30mm…
-
Poxygrid® 100mm Petri Dish Mini Rack
SP Bel-ArtOrganize and Safely Hold Six, 100mm Dishes The epoxy-coated steel wire Petri Dish Mini Rack helps keep benchtops neat and organized. Holds six 100mm Petri dishes with lids Ideal for lab transport and incubation of dishes Epoxy coated steel wire is chemical and corrosion resistant…
-
Scienceware® Pasteur Pipet Rack
SP Bel-ArtDesigned specifically for safe, convenient storage Sits flat on the bench top for convenient access without “dropping” other pipettes Has capacity of up to four sterilization cans Durable epoxy-coated surface Autoclavable Pasteur Pipettes, used in high volume for inoculating…
-
Color Comparison Tube Rack
SP Bel-ArtColor Comparison Tests Just Became Easier Colors stand out against the white surfaces of this polypropylene rack making color comparison tests easier to read. Useful for drying or storing test tubes Holds six, 25mm or eight, 18mm tubes; includes six drying pins Steam…
-
Poxygrid® 50mL Centrifuge Tube Racks
SP Bel-ArtThis black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack. Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81") Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids…
-
5 mL Centrifuge Tube Rack
SP Bel-ArtDesigned specifically for 5ml centrifuge tubes, including Eppendorf* brand, this rack will also accommodate other tubes with a diameter of 13-16mm. Made of durable and corrosion resistant white polypropylene plastic End plates have handles for easy transport and stacking Top shelf…
-
Easy tube content ID Autoclavable Angling 50 mL tubes allows easier identification of contents marked on cap. The rack, whether used on a benchtop or in a refrigerator, holds frequently used reagents nearby and on an angle facing the user. Angled rack is also useful for draining excess…
-
Scienceware® Vacu-Rack
SP Bel-ArtThis polypropylene rack holds 143 vacuum-type syringe tubes: 80 tubes 12.7mm (1/2") O.D. and 63 tubes 16mm (5/8") O.D. up to 102mm (4") long. Tubes are suspended in channels by colored stoppers providing instant visual identification One or two channels may be left open…
-
Scienceware® No-Wire™ Bottle & Vial Racks
SP Bel-ArtSmall enough to hold in one hand and enough choices to accommodate most vials and small bottles. Offered in 5 grid configurations Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70") Polypropylene; autoclavable
-
Pipettor Stand-6™ Rack
SP Bel-ArtTransparent acrylic stand stores 6 pipettors ready for use Stores many available pipettors Places: 6 Material: acrylic
-
Scienceware® Polypropylene Pipet Racks
SP Bel-Art28-Place Holds 28 pipets in vertical position Pipets fit into 2 discs connected by central support column Upper disc has 10 holes, 14 mm in diameter and 18 holes, 11 mm in diameter Lower disc has 28 holes, 4 mm in diameter to support pipet tips Overall height 7"; diameter 7"H …
-
Poxygrid® "Rack and a Half" Test Tube Racks
SP Bel-ArtFor High Volume Work High quality epoxy-coated wire racks in convenient extra-long sizes for volume test tube work. Epoxy coated steel wire is chemical and corrosion resistant Steam autoclavable at 121°C (250°F)
-
No-Wire™ Micro Tube Racks
SP Bel-ArtSteam autoclavable at 121°C (250°F) Dimensions: 128mm x 105mm x 43mm H (5.08" x 4.15" x 1.70") Available in 2 sizes to hold either 0.5 or 1.5ml tubes. Open sides, ideal for use in a tray of crushed ice. Easy to assemble. 1226C36: holds tubes: 0.5 mL micro, places: 63, rows: 7 x…
-
Dry it - No Matter How Much Space You Have High storage capacity to accommodate up to 114 peg positions for all types of labware Single-sided benchtop models fit against a wall, conserving bench space Double-sided benchtop models provide twice the capacity with a slightly larger…
-
Unique tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Patent pending. Immobilizing tabs prevent tube tops from popping open during boiling Holds up to twelve…
-
Save Time and Money. No More Searching, Fumbling or Breakage. Store pipettors while protecting pipettor tips in these epoxy-coated aluminum racks that provide quick, easy access for more efficient work. Holds up to 10 round shape pipettors such as Finnpipette®, Socorex®,…
-
Scienceware® 3mm NMR Sample Tube Rack
SP Bel-ArtSturdy, stable polypropylene rack is made specifically for organizing and protecting 3mm O.D. thin-walled Nuclear Magnetic Resonance tubes. Holds up to 72 tubes in a 6 x 12 array. Hemispherical wells in the lower deck cradle tubes Sturdy, stable polypropylene construction Handles at…
-
Chromatography Column Holder
SP Bel-ArtSecurely holds as many as eight chromatography columns up to 30mm (1-3/16") in diameter in or between its flexible loops. Rigid plastic back is mounted on two polyethylene support blocks which slide over support stand rods Tighten the screws to mount the rack at the desired height …
-
Scienceware® Radioimmunoassay Tube Racks
SP Bel-ArtOrganize over 100 samples in one rack Polyethylene racks provide practical methods of pipetting and storing a large number of samples Using alternate rows and rotating tubes makes it easy to keep track of the last tube filled Can be used in clinical labs for storage of samples Steam…
-
Made especially for use with beakers and waterbaths, these space-saving racks are ideal for small quantities of tubes and perfect for use in microbiology and immunology labs. They are molded of buoyant TPX® brand polymethylpentene with tiny bubbles throughout for additional buoyancy. Insert…
-
Unique immobilizing tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Raised handle for easy…