SP Bel-Art, Racks, Bottles
-
MCT/PCR Rack
SP Bel-ArtPerfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …
-
Scienceware® Floating Cryotube Rack
SP Bel-ArtPolypropylene Autoclavable 20 places Rack accepts 12mm tubes Rack can be used for holding cryotubes during work or incubation. It floats in water and can be used for quickly thawing frozen cells in a water bath. Rack has handle for easy handling. The filled rack unloads easily by…
-
Bel-Art® Poxygrid Test Tube Racks
SP Bel-ArtChoice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…
-
Scienceware® Microtube Rack
SP Bel-ArtRound-holed Stackable, autoclavable White, polypropylene rack takes 72 centrifuge tubes in 6 rows of 12. Molded cutouts in end panels form handles. 2591C58 and C60 hold 400-500 µL tubes and are 9” L x 4 3/8” W x 4 3/8” H. 2591C62 and C64 hold 1.5 mL tubes and are…
-
Scienceware® Hydrometer Racks
SP Bel-ArtPolypropylene racks Top and middle plates have 25 mm diameter holes; bottom plate has wells tapering from 25 to 9 mm to hold hydrometer bulb Overall height is 251 mm Steam autoclavable at 121°C 6040A10 has top plate of 143 mm high for short hydrometers
-
Spectro Cell Rack
SP Bel-ArtWells hold standard cells with a 12.5mm cross-section; however, some plastic cells may not fit. Steam autoclavable at 121º C (250º F). Overall dimensions 209 x 70 x 35mm (8 1/4" x 2 3/4" x 1 3/8 "). Polypropylene rack holds twenty 10mm lightpath Spectrophotometer cells in numbered wells The…
-
Scienceware® Round Bottom Flask Support
SP Bel-ArtRound-bottom flasks of any size up to 10 liters are cradled securely in the stepped concentric rings of this holder. Can be stacked together for convenient storage Polypropylene plastic rack; not affected by spilled acids, alkalis or other corrosive liquids Steam autoclavable at…
-
NMR Sample Tube Rack
SP Bel-ArtPolypropylene rack is steam autoclavable at 121°C (250°F). Dimensions: 21cm x 11cm x 22cm H (8 3/8" x 4 ½" x 8 ¾"). Rugged and stable polypropylene rack is made specifically to support and safely store Nuclear Magnetic Resonance tubes. Upper deck has holes; lower deck has hemispherical wells to…
-
Scienceware® Stack Rack® Test Tube Racks
SP Bel-ArtMatch Rack Material to Lab Use These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121°C (250°F). …
-
Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…
-
Adjustable Microplate Tilting Stand
SP Bel-ArtMinimize Pipetting Errors Make precise additions of liquid components to microplate wells by adjusting plates to the most convenient angle. The angular presentation of the plate and clear acrylic platform beneath allows you to easily judge which wells have received liquid addition by…
-
Stainless Steel Pipettor Stand
SP Bel-ArtMade of stainless steel without any plastic coating, this universal rack holds all types of pipettors including the Gilson Pipetman®. Five positions, sloping back and open front notches hold the pipettors Suitable for free standing on a bench top
-
Rotary Pipette Stand
SP Bel-ArtTurn to the Pipette You Want This unique stand holds up to 94 pipettes and rotates on a central vertical axis for convenient selection. Rotating disks are 18cm (7-1/8") diameter. Instructions for quick assembly included. Lower disc consists of four concentric troughs with tapered…
-
Scienceware® Rack Slanter
SP Bel-ArtTilt your test tube rack to 25°, 35° or 45° to reduce hand strain when working with pipettors. Also ideal for creating agar slant tubes or use with the Mini-Magnifier to aid in the viewing of Petri dishes. Base legs have predetermined slots that stand slides in and out of to…
-
In-Line Test Tube Rack
SP Bel-ArtFor high-visibility, this 6-place high-density polyethylene rack is end-supported by two columns. Top plate has 25 mm diameter holes; base has corresponding hemispherical wells Includes six vertical pins for tube drying Easy snap together assembly
-
Poxygrid® Imhoff Settling Cone Rack
SP Bel-ArtUse a Poxygrid® cone rack to support three Imhoff settling cones in a single row for clearer viewing. Lightweight Poxygrid® racks hold cone tips up off the benchtop for easier viewing and to allow plug removal if required Wire frame racks have a wide base for stability; epoxy…
-
Scienceware® Thermometer Rack
SP Bel-ArtPolypropylene thermometer rack holds up to 25 thermometers in a vertical position Hole diameters in top and middle plates are 7.9 mm ( 5/16") Bottom plate has 3.2 mm ( 1/8”) diameter drain holes. Overall dimensions: 149 x 213 x 251 mm (5 7/8 x 8 3/8 x 9 7/8”)
-
Scienceware® Standards Bottle Rack
SP Bel-ArtArranges valuable USP™ reference standards Rack fits into Secador® Desiccator for low humidity storage Clear acrylic construction for easy viewing of labels Wipes clean Stores thirty 23mm standards bottles in a compact footprint, 33 x 11 x 2.2 cm high.
-
Scienceware® No-Wire™ Test Tube Half Racks
SP Bel-ArtCompact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods. Available in 5 grid sizes to accommodate the full range of laboratory test tubes Steam autoclavable at 121°C (250°F) Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")
-
Three Styles to Suit Your Needs Choose from 3 styles of epoxy-coated aluminum rack to hold Gilson Pipetman® pipettors. Provides storage and easy access for up to 10 pipettors plus up to two Pipet-Aid® pipettes 0211J40 (H18962-0001) for desktop storage 1226D30 …
-
Autoclavable Rows are numbered and lettered Base plate has rounded wells with drain holes. Molded cutouts in end panels form handles. 9259L10 and L20 are 213 x 110 x 111 mm high; 9259L30 through L50 are 213 x 110 x 127 mm high.
-
Poxygrid® 500mL Centrifuge Tube Racks
SP Bel-ArtKeeps 500mL Centrifuge Tubes Upright and Secure This unique steel wire rack allows storage and transport of up to four (4) 500mL conical bottom centrifuge tubes. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature…
-
Scienceware® No-Wire™ Test Tube Racks
SP Bel-ArtGreat alternative to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions…
-
Poxygrid® 60 & 150-Place Test Tube Racks
SP Bel-ArtChemical and corrosion-resistant steel wire test tube rack is coated with heat-cured epoxy for long life and easy cleaning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range: -223°C (-369°F) to 121°C (250°F);…
-
Round Microcentrifuge Floating Racks
SP Bel-ArtPerfectly Sized for Beakers Molded of steam autoclavable polypropylene, these racks fit 400ml or 1000ml beakers. Choose from 8 or 20 place racks with 10.8mm holes for 1.5ml microtubes. Tubes remain completely immersed in a beaker while tops rest above the rack Unload by lightly…
-
Full-View Test Tube Supports
SP Bel-ArtHold More Tubes, Waste Less Space This versatile polypropylene rack has pins for supporting or draining test tubes. Stores test tubes upright, full or empty Holds inverted test tubes over pins for draining The rack with 102 pins, 5 x 16 rows (9259G50), is excellent for drying…
-
Scienceware® No-Wire™ Round Racks
SP Bel-ArtThese No-Wire™ racks fit neatly into round containers such as ice buckets and beakers, as well as desiccators. Choose from two sizes; the large rack is ideal for use in round ice buckets such as Magic Touch™ and the small rack fits perfectly in a 1000mL beaker. Special…
-
Scienceware® Pipet Support Rack
SP Bel-ArtHolds 12 pipets Polyethylene construction Pipet support rack supports pipets horizontally without putting pressure on fragile tips. Rack holds 12 volumetric or graduated pipets from 1 mL . The polyethylene support measures 241 mm L x 178 W x 292 H (9 1/2” x 7” x 11…
-
Safely transport, incubate and store Petri dishes and contact plates, and helps to streamline benchtop sample processing. Configured in 6 columns with bottom access slots for easy removal of plates Center divider with built-in handle has ample space for labeling Up to four racks can…
-
Scienceware® No-Wire™ Cuvette Rack
SP Bel-ArtAll-polypropylene rack provides gentle no-scratch support for fragile and expensive spectrophotometer cuvettes. Holds forty-two 10mm light path cuvettes 6 x 7 row layout Steam autoclavable at 121°C (250°F)
-
Poxygrid® Hybridization Bottle Racks
SP Bel-ArtProtects and Stores Hybridizing Bottles Heavy-duty rack protects your expensive bottles keeping them from rolling, tipping and striking against one another. Holds 150mm and 300mm long bottles with ample space in between to allow for the screw cap diameter and provide convenient handling. …