SP Bel-Art, Racks, Bottles
-
Rotary Separatory Funnel Rack
SP Bel-ArtThis rotary separatory funnel rack consists of a rectangular base, screw-in column and a support disc held in place by a screw clamp. Support disc is fully adjustable for different heights up to 21" Open front type support holes for easy removal and placement of separatory funnels …
-
MCT/PCR Rack
SP Bel-ArtPerfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …
-
Poxygrid® 100mm Petri Dish Mini Rack
SP Bel-ArtOrganize and Safely Hold Six, 100mm Dishes The epoxy-coated steel wire Petri Dish Mini Rack helps keep benchtops neat and organized. Holds six 100mm Petri dishes with lids Ideal for lab transport and incubation of dishes Epoxy coated steel wire is chemical and corrosion resistant…
-
Epoxy-coated steel wire rack holds 15 conical bottom 15mL centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes. Generously spaced for easy handling Heat-cured epoxy coating is unaffected by organic…
-
Bel-Art® Poxygrid Test Tube Racks
SP Bel-ArtChoice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…
-
Scienceware® Floating Centrifuge Tube Racks
SP Bel-ArtAllows Superior Temperature Control of Samples Open style floating rack provides tubes with maximum contact with the water and better circulation of the water bath around the tubes, allowing superior temperature control of samples. Work on the benchtop, float in the water bath …
-
Switch-Grid™ Test Tube Racks
SP Bel-ArtThis innovative, split-frame rack holds up to two different size tubes in the same rack and allows users to quickly switch grids to hold other sizes as needed. Each rack frame includes a set of grids in one size. Grid sets in alternate sizes can be purchased separately. 10mm to 30mm…
-
Poxygrid® 50mL Centrifuge Tube Racks
SP Bel-Art50mL Multiple Tube Holders Made of epoxy-coated steel wire, these racks hold up to thirty-six 50mL centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223°C…
-
Scienceware® No-Wire™ Round Racks
SP Bel-ArtThese No-Wire™ racks fit neatly into round containers such as ice buckets and beakers, as well as desiccators. Choose from two sizes; the large rack is ideal for use in round ice buckets such as Magic Touch™ and the small rack fits perfectly in a 1000mL beaker. Special…
-
Scienceware® Hydrometer Racks
SP Bel-ArtPolypropylene racks Top and middle plates have 25 mm diameter holes; bottom plate has wells tapering from 25 to 9 mm to hold hydrometer bulb Overall height is 251 mm Steam autoclavable at 121°C 6040A10 has top plate of 143 mm high for short hydrometers
-
24-Hole Scintillation Vial Rack Takes 24 vials up to 30 mm o.d. Autoclavable; non-scratching Molded cutouts in end panels form handles For start to finish preparation Height to top of upper shelf: 44 mm. Overall dimensions: 298 x 127 x 95 mm high. Height to top of upper shelf is 1-3/4".
-
Scienceware® Thermometer Rack
SP Bel-ArtPolypropylene thermometer rack holds up to 25 thermometers in a vertical position Hole diameters in top and middle plates are 7.9 mm ( 5/16") Bottom plate has 3.2 mm ( 1/8”) diameter drain holes. Overall dimensions: 149 x 213 x 251 mm (5 7/8 x 8 3/8 x 9 7/8”)
-
Scienceware® Floating Cryotube Rack
SP Bel-ArtPolypropylene Autoclavable 20 places Rack accepts 12mm tubes Rack can be used for holding cryotubes during work or incubation. It floats in water and can be used for quickly thawing frozen cells in a water bath. Rack has handle for easy handling. The filled rack unloads easily by…
-
Round Microcentrifuge Floating Bubble Racks
SP Bel-ArtSpecifically designed for incubating 1.5mL microcentrifuge tubes, this rack includes a hold-down disk which maintains a constant pressure on the tube caps and prevents them from opening during internal air expansion. The polypropylene disk with threaded handle screws into the…
-
Adjustable Microplate Tilting Stand
SP Bel-ArtMinimize Pipetting Errors Make precise additions of liquid components to microplate wells by adjusting plates to the most convenient angle. The angular presentation of the plate and clear acrylic platform beneath allows you to easily judge which wells have received liquid addition by…
-
Unique immobilizing tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Raised handle for easy…
-
60mm Petri Dish Racks
SP Bel-ArtThis rack is useful for safe transport and incubation of 60mm Petri dishes and helps to streamline benchtop sample processing. Rack base is epoxy coated steel, and all other parts are made of white polypropylene. Racks are shipped flat and easily assemble in minutes. Six columns hold up to…
-
Scienceware® No-Wire™ Test Tube Racks
SP Bel-ArtGreat alternative to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions…
-
Three Styles to Suit Your Needs Choose from 3 styles of epoxy-coated aluminum rack to hold Gilson Pipetman® pipettors. Provides storage and easy access for up to 10 pipettors plus up to two Pipet-Aid® pipettes 0211J40 (H18962-0001) for desktop storage 1226D30 …
-
Scienceware® No-Wire™ Test Tube Half Racks
SP Bel-ArtCompact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods. Available in 5 grid sizes to accommodate the full range of laboratory test tubes Steam autoclavable at 121°C (250°F) Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")
-
Poxygrid® Labware Drain Stand
SP Bel-ArtDry Test Tubes, Beakers, Flasks, and Other Labware For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting. Three rows of epoxy-coated hairpin-loop supports (14 in all)…
-
NMR Sample Tube Rack
SP Bel-ArtPolypropylene rack is steam autoclavable at 121°C (250°F). Dimensions: 21cm x 11cm x 22cm H (8 3/8" x 4 ½" x 8 ¾"). Rugged and stable polypropylene rack is made specifically to support and safely store Nuclear Magnetic Resonance tubes. Upper deck has holes; lower deck has hemispherical wells to…
-
Scienceware® 50mL Tube Holders
SP Bel-ArtPolystyrene construction. Leave both hands free for pipetting and other critical tasks Non-Grip Style safely supports a 50ml conical centrifuge tube and permits the tube to freely be removed Grip Style gently grips the tube and moves with the tube when it is lifted from the bench top
-
Scienceware® Stack Rack® Test Tube Racks
SP Bel-ArtMatch Rack Material to Lab Use These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121°C (250°F). …
-
Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…
-
Made especially for use with beakers and waterbaths, these space-saving racks are ideal for small quantities of tubes and perfect for use in microbiology and immunology labs. They are molded of buoyant TPX® brand polymethylpentene with tiny bubbles throughout for additional buoyancy. Insert…
-
Microcentrifuge Floating Racks
SP Bel-ArtCompact and Economical Incubate up to twenty-four 1.5ml microcentrifuge tubes in a water bath. Easy to load Microtubes are held snugly and then released when the rack is pressed down on a benchtop Dimensions: 11.9 x 7.8cm (4-11/16 x 3-1/16")
-
Scienceware® Standards Bottle Rack
SP Bel-ArtArranges valuable USP™ reference standards Rack fits into Secador® Desiccator for low humidity storage Clear acrylic construction for easy viewing of labels Wipes clean Stores thirty 23mm standards bottles in a compact footprint, 33 x 11 x 2.2 cm high.
-
Scienceware® Microcentrifuge Tube Ice Racks
SP Bel-ArtLower section of these 2-piece racks is a tray for water or crushed ice. Of gray, high-impact styrene. 0210C94 holds 120 tubes under 12 mm diameter and is 16" L x 5-5/8" W x 2-1/4" H; 2591D02 holds 105 tubes under 8 mm diameter and is 8-1/2" L x 4-7/8" W x 2-5/8" H;…
-
Scienceware® Rack, PP, Electrode
SP Bel-ArtRacks hold two rows of four tubes up to 20mm in diameter. Overall dimensions 108mm x 60mm x 121mm high (4 1/4 " x 2 3/8" x 4 3/4 "). Steam autoclavable at 121°C (250°F). Store and condition eight pH, Redox/ORP or ion electrodes in individual test tubes. Polypropylene rack is chemical and…
-
1.5 to 15 mL tubes Holds six tubes or vials Compact footprint This height-adjustable rack securely holds up to six tubes or vials at any desired depth in a water bath or beaker. Rack features a flexible grip that easily retains mixed test tubes or varying weight and volume…