Labconco, Hoods, Supplies
-
Carbon-based and HEPA filters used in a variety of Labconco enclosures require periodic replacement. Applicable products include: PuriCare Procedure Stations (pre-2008), Purifier Cell Logic Biosafety Cabinets and Purifier Logic Biosafety Cabinets with an enclosure nominal width of 6 feet.
-
HEPA Filter Cell Bag Replacement
LabconcoReplacement Bag for Bag-in/Bag-out HEPA Filter to contain particulate matter during filter changing.
-
Protector standard storage cabinet features 18 gauge steel exterior sidewalls that are epoxy-coated for chemical resistance. Cabinets feature two non-locking manual doors. Four individual leveling feet allow users to make adjustments to level the cabinet based on the condition of their floors.…
-
SpillStopper Work Surfaces are compatible with Protector (Premier or XStream) Laboratory Hoods with Eco-Foil(TM) Air Foil. Molded from a special formulation of corrosion-resistant epoxy resins, these work surfaces are dished and contoured to conform to the interior liner of Protector Laboratory…
-
XPert Balance Enclosure Stations
LabconcoXPert Filtered Balance Stations are designed to protect the user during powder weighing operations. Ducting to an outside blower is required. Patented features include an ergonomic air foil with Clean-Sweep openings to enhance airflow and a zone-perforated rear baffle that creates horizontal…
-
Protector XL Floor-Mounted (Walk-In) Laboratory Hoods have panel liners that may be constructed of a variety of corrosion-resistant materials and supplied in three depths to meet individual installation and application requirements. They are suitable for general chemistry applications and…
-
Molded of corrosion-resistant epoxy resins, dished & contoured to conform to interior of ClassMate Hoods. Pre-drilled 1.5" dia holes for venting & 2.5" dia holes for plumbing.
-
-
-
Stainless Steel Work Surfaces
LabconcoType 304 stainless steel work surfaces have a 1" deep front spill trough and fit dimensions of Xpert Systems and Stations.
-
Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …
-
Protector Echo Filtered Fume Hoods
LabconcoThe Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that…
-
Ideal for fume hood exhaust systems in moderate to highly corrosive conditions. Intelli-Sense Multi-Speed Blowers are weatherized, direct drive, non-explosion-proof blowers controlled by a two or three position switch. Each blower has a reliable electronically commutated motor (ECM), which…
-
Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …
-
Protector Filtermate
LabconcoRequire no outside ducting Non-sparking motor/blower Foot operated on/off switch Durable construction Hard rubber casters Adjustable blower speed An accessory to the Protector® VS™ Ventilation Station, the Filtermate filters the contaminated air generated and returns purified air to the…
-
The Purifier Axiom Class II, Type C1 is the first biological safety cabinet that can be used in a recirculating Type A-mode for standard microbiological work, or can be connected to an exhaust system to function in Type-B mode for handling hazardous chemical vapors or radionuclides. Because of the…
-
Organic Filter Cell
LabconcoOrganic Carbon Filter, Type AC. Contains 12 pounds of granular activated carbon media suitable for organic solvents including acetone, ethyl acetate, toluene and xylene. Carbon-based filters used in a variety of Labconco enclosures require periodic replacement.
-
Conversion Kit for 4'-8' Protector XL Floor-Mounted Fume Hood ceiling enclosure kit (sold separately). 3-Sided Ceiling Enclosure Kits include 3 glacier white powder-coated steel panels (front & 2 sides) that extend from top of hood to ceiling to hide ductwork, plumbing & wiring. 1EA.
-
Protector Fume Hood Accessories
LabconcoScreen mounts behind the baffles for trapping tissue wipers & other papers. Each kit includes mounting hardware, powder-coated stainless steel screen & instructions. Contact Labconco for screens for hoods wider than 8'.
-
The Protector® Echo™ Floor-Mounted Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured…
-
Sash stop kit
LabconcoSash Stop Kit. Restricts how far a vertical-rising sash may be opened. Compatible with Protector Xstream and Premier Fume Hoods
-
Protector Echo Filtered Fume Hoods
LabconcoThe Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that…
-
Protector Filtered Fume Hoods
LabconcoNeutrodine Unisorb Molecular Filter Neutrodine Unisorb molecular carbon filter unit for multi-purpose use of acids/bases/solvents, separated or combined. Compatible with 500+ chemicals. For use with Protector Echo and Airo Filtered Hoods. 1 EA. HEPA Filter, 99.995% efficient, H14 type, for…
-
gGuard® Communication Software Automatically collects and records hood data, alerts and alarms on a customer-supplied personal computer Monitors, manages and provides data via email to a designated facility manager Provides access to the following: usage authorization, filter…
-
Protector Echo Filtered Fume Hoods
LabconcoThe Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that…
-
Protector Echo Filtered Fume Hoods
LabconcoThe Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that…
-
Guardian™ Digital Airflow Monitors
LabconcoMonitor and alert the operator to low airflow conditions. Include face plate with circuit board, electrical power pack, airflow hose and flow hose adapter. LCD displays actual airflow in fpm or m/sec from 0 to 999 fpm (0 to 5.0 m/s). Audible/visual alarm alerts user to sustained low velocity…
-
The Protector® Echo™ Floor-Mounted Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured…
-
Recommended for low to moderately corrosive applications Intelli-Sense Multi-Speed Blowers are weatherized, direct drive, non-explosion-proof blowers controlled by a two or three position switch. Each blower has a reliable electronically commutated motor (ECM), which consumes one third less…
-
Fume Adsorbers
LabconcoTraps solvent vapors Fume Adsorber is designed for histology cover slipping and staining areas and uses activated carbon media to adsorb annoying odors and noxious vapors such as xylene and toluene. Solvent vapors are trapped in the capillary-like channels of the carbon filter while clean air is…
-
SpillStopper™ Work Surfaces, 4' Wide
LabconcoSpillStopper Work Surfaces are molded from a special formulation of corrosion-resistant epoxy resins. They are dished and contoured to conform to the interior liner of Protector Laboratory Hoods. The front edge has a large radius to aerodynamically direct airflow into the fume hood. Pre-drilled…
-