Kemtech America, Nucleic Acid Sample Preparation
-
SYNTHWARE Allihn Condensers with Removable Hose Connections
Kemtech AmericaAllihn Condenser, Removable Hose Connections Jacket Length: 120, 200, 300 or 400mm Joints: 14/20, 24/40, or 29/42 Hose Connection OD: 8mm With outer joint at the top and inner joint at the bottom.
-
SYNTHWARE Grahm Condensers
Kemtech AmericaGraham Condenser Joints: 14/20, 19/22 and 24/40 available Jacket Length: 120, 200, 250, 300 and 400mm available Hose Connections: 8 or 10mm available **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**
-
SYNTHWARE Bubbler
Kemtech AmericaWith small ball joints to prevent mineral oil being sucked back under sudden negative pressure in the system.
-
SYNTHWARE Joint Clamps
Kemtech AmericaJoint Clamp, Standard Taper, Plastic, Synthware, Various Joint Sizes Available.
-
SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with an integral reservoir, PTFE stopcock and a top spherical socket joint. Designed for flash chromatography. Column packing is supported by glass wool (not supplied). Joint: SJ 35/20 Note: since the chromatography…
-
SYNTHWARE West Condensers
Kemtech AmericaWest Condenser Joints: 14/20, 19/22, and 24/40 available Jacket Length: 110, 190, 200, and 300mm available Narrow annular space for fast collant speed thus high cooling efficiency.
-
SYNTHWARE Chromatography Columns with Reservoirs
Kemtech AmericaSYNTHWARE general purpose chromatography column with heavy wall design. Supplied with an integral reservoir, PTFE stopcock and a top standard taper outer joint. Designed for flash chromatography. Column packing is supported by glass wool (not supplied). Top Joint: ST 24/40 Note: since the…
-
SYNTHWARE Reflux Condensers
Kemtech AmericaCoil style reflux condenser with tightly wrapped coil providing maximum cooling. Excellent for use with volatile solvents. Condenser has a top outer standard taper joint and lower inner drip tip joint. Hose connections have an O.D. of 8mm or 10mm at the middle serration.
-
Indentations at the bottom for supporting packing material. Jacket permits the column to be used as a condenser.
-
SYNTHWARE Clamp Bosshead
Kemtech AmericaClamp Bosshead, Synthware, For rods up to 15mm diameter, chrome plated finishwith plastic headed screws.
-
SYNTHWARE Coiled Condensers with Removable Hose Connections
Kemtech AmericaCoiled Condenser, Removable Hose Connections Joints: 24/40 or 29/42, Jacket Length, 200, 300 and 400mm available Hose Connection: 8mm **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**
-
SYNTHWARE Reflux Condensers with Angled Top Joints
Kemtech AmericaTop outer joint is angled 75 degrees to the condenser body. Coil section is 100mm in height.
-
SYNTHWARE Micro Dewar Condenser
Kemtech AmericaDewar Condenser, Micro Joints: 14/20 Inside Depth: 90mm Inside Diameter: 31mm Side joint is at 90 degree angle.
-
SYNTHWARE Diagonal Rotary Evaporator Condenser
Kemtech AmericaDouble coil condenser for use with Buchi rotary evaporators for cooling with tap water in a diagonal position. A 19/38 top valve. With 35/20 spherical ball joint.
-
SYNTHWARE Mineral Oil Bubblers
Kemtech AmericaMineral Oil Bubbler, Body OD: 26mm,Overall Height: 185mm OR 500mm, Hose Connection: 10mm **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**
-
SYNTHWARE Microscale Reflux Solvent Still
Kemtech AmericaReflux Solvent Still, Microscale, Synthware, Capacity: 25mL, Joints: 14/20, Stopcock Bore: 2mm.
-
SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with a PTFE stopcock and a reinforced beaded top. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is carefully minimized to prevent…
-
SYNTHWARE Liebig Condensers
Kemtech AmericaLiebig Condenser Jacket Length: 100, 120, 180, 200, 250, 300, 400, and 500mm Joints: 14/20, 19/22 and 24/40 available Hose Connection: 8 or 10mm With outer joint at the top and inner joint at the bottom.
-
SYNTHWARE Air Reflux Condenser with 14/20 Joint
Kemtech AmericaAir Reflux Condensor, Synthware, Joints: 14/20, Overall Length: 143mm, Length Between Joints: 96mm.
-
SYNTHWARE Cold Finger Condenser with Drip Tip
Kemtech AmericaExtended offset lower tip for drop control.
-
SYNTHWARE Air Reflux Condenser
Kemtech AmericaAir Reflux Condensor,Microscale, Synthware, Joint: 14/10, Effective Length: 100mm, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
-
SYNTHWARE Three-Finger Dual-Adjustable Clamps
Kemtech AmericaManufactured from chrome-plated zinc alloy, with PVC coated prongs.
-
SYNTHWARE Friedrichs Condenser
Kemtech AmericaFriedrichs Condenser, Joint: 24/40, Overall Height: 330mm, Hose Connection: 10mm
-
TLC Cylindrical Developing Tanks
Kemtech AmericaAll glass cylindrical TLC developing chambers that will accommodate 25 x 75mm to 50 x 200mm TLC plates. The compact design offers good plate visability and minimal solvent use. Lid has a short length standard taper joint with a ball style handle.
-
SYNTHWARE chromatography flow adpater with a 0-4 mm high vacuum PTFE valve with metering tip to adjust the air pressure. The o-rings on the valve are completely encapsulated with a thin layer of PTFE, making it inert to most chemicals. Foruse with columns having a Rodaviss 24/40 outer joint.
-
SYNTHWARE Liebig Condensers with Removable Hose Connections
Kemtech AmericaLiebig Condenser, Removable Hose Connections Jacket Length: 120, 180, 200, 250, 300, 400, and 500mm Joints: 14/20, 19/22, and 24/40 available Hose Connection OD: 8mm With outer joint at the top and inner joint at the bottom.
-
SYNTHWARE Chromatography Flow Control Adapters
Kemtech AmericaSYNTHWARE chromatography flow adapter with a 0-4 mm high vacuum PTFE valve with metering tip to adjust the air pressure. The o-rings on the valve are completely encapsulated with a thin layer of PTFE, making it inert to most chemicals.
-
-
SYNTHWARE Horseshoe-Style Clamps
Kemtech AmericaHorseshoe Style Clamp, Synthware, Available for 57mm or 80mm flange sizes, manufactured from aluminum with black epoxy coating.
-
SYNTHWARE Chromatography Columns with Reservoirs & Fritted Disc
Kemtech AmericaSYNTHWARE general purpose chromatography column with heavy wall design. Supplied with an integral reservoir, PTFE stopcock and a top standard taper outer joint. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is…
-
SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with a PTFE stopcock and a top standard taper outer joint. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is carefully minimized to…
-
SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with an integral reservoir, PTFE stopcock and a top spherical socket joint. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is…