Condenser 24 40

Friedrichs Condenser, Joint: 24/40, Overall Height: 330mm, Hose Connection: 10mm

With a joint at 15° angle. Supplied completely with Nylon® cap and hose connections.

With a joint at 15º angle.

…Our Hemple Condenser is made from high-quality borosilicate glass and has a 300mm long condensing column. Our Liebig Condensers are made from high-quality borosilicate glass and have a straight sealed inner tube and two inlet/outlet arms. These condensers have a 300mm long condensing column and…

This unique design combines some of the best features for refluxing in a single condenser. Coolant, introduced into the upper hose connection, fills a large cold finger that is wrapped with coils. After the coolant travels through the coils, it enters the water jacket to maximize cooling surface…

The Bellco Sci/ERA Cell Production Roller Apparatus has been designed for production of mammalian cells, viruses and cell products.  Non-modular production units come in 45 and 50 bottle positions with over 80,000 cm 2 of surface area.  All units feature a solid state control with heavy-duty DC…

The Bellco Cell Production Roller Apparatus has been designed for production of animal cells, viruses and cell products.  Modular units are available from 5 to 45 bottle positions and allow easy expansion with modular add-on decks.  Non-modular production units come in 45 and 50 bottle positions…

The Bellco Sci/ERA Cell Production Roller Apparatus has been designed for production of mammalian cells, viruses and cell products.  Non-modular production units come in 45 and 50 bottle positions with over 80,000 cm 2 of surface area.  All units feature a solid state control with heavy-duty DC…

The Bellco Cell Production Roller Apparatus has been designed for production of animal cells, viruses and cell products.  Modular units are available from 5 to 45 bottle positions and allow easy expansion with modular add-on decks.  Non-modular production units come in 45 and 50 bottle positions…

Jacket has an O.D. of 40mm while coil O.D. is 8mm to provide maximum cooling capacity.

Allihn Condenser, Removable Hose Connections Jacket Length: 120, 200, 300 or 400mm Joints: 14/20, 24/40, or 29/42 Hose Connection OD: 8mm With outer joint at the top and inner joint at the bottom.

Coiled Condenser, Removable Hose Connections Joints: 24/40 or 29/42, Jacket Length, 200, 300 and 400mm available Hose Connection: 8mm **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**

Jacket has an O.D. of 40mm while coil O.D. is 8mm to provide maximum cooling capacity.

…vacuum pump with integrated solvent recovery and a space saving stand. Inlet catchpot helps preserve pump performance with condensates in the vacuum line. Outlet condenser helps recover solvent vapors that pass through the pump, and quiets the pump even more. Excellent for many smaller applications,…

Turbulent flow created makes this condenser very desirable for use under reduced pressure. Internal and external cooling surfaces result in high efficiency per unit length. Joints are standard taper 24/40.

…for drying samples at a temperature as a function of the solvent boiling point. The desiccant flask has a 34/45 outer joint for connection to the drying chamber. All other joints are 24/40. Complete apparatus consists of a desiccant flask, drying chamber, round bottom flask and Allihn condenser.

…the with a 60mm I.D. flat flange and a quick release stainless steel clamp. on drying chamber has a groove for a silicone O-Ring to make a leak-tight flat flange on desiccant tube. Joints on condenser and flask are 24/40. item consists of condenser, drying chamber, desiccant tube, flask, and O-Ring.

…drying chamber has an I.D. of 2” and is 8” long. The desiccant flask has a 4mm glass stopcock and a serrated connection for the vacuum source. The flask and condenser joints are 24/40. Complete apparatus consists of a drying chamber, desiccant flask, condenser, clamp and Viton o-ring.

…BY Vertical condenser with additional double jacket for cooling. Additional joint on the top fo the condenser for flexible expansion. For particularly efficient condensation. Evaporating flask feed via stop-cock. Connection for vapor temperature sensor. Includes BY Vertical Condenser 048177, 1L…

…with dimethyl carbonate . in the synthesis of duocarmycin and CC-1065 analogs . as catalyst in aza-Michael addition and Knovenegal condensation reaction. as base for dehalogenation of halogenated Diels-Alder adducts and the resulting activated 2,4-dienones were subjected to regio-…

…3.3 borosilicate glass. Short Path Distillation Head (two included in the kit) with 24/40 flask joints features a condenser coil and three ¼” hose nozzles, two for condenser and one for vacuum. The cow-type Distillation Receiver (two included in the kit) has one 24/40 outer joint…

…17                   2.8                 15 (1.0)                20 (1.4) 18                   3.8                 10 (1.0)                15 (1.4) 15                   1.7                 25 (1.7)                40 (2.7) 24                   2.8                 25 (1.7)                40 (2.7)

…Formula: C18H26N2O2S Molecular Weight: 334.4 MDL No.: MFCD00005283 Appearance: White crystalline powder Comments: Coupling or condensing agent in oligonucleotide synthesis Melting Point: 115-125 °C Storage Temperature: Store at RT Warnings: Irritant! Moisture sensitive!

With the condenser being a combination of a cold coil and Leibig. Top outer joint is a 10/18 for use with a 50mm immersion thermometer. With Vigreux Indentations.

Complete with bulb type condenser and one flask. Cycling rates may be doubled over conventional style extractors. All joints are interchangeable. The 82" size is supplied with adapter for connecting the extractor and condenser. This is necessary because of the extremely large top joint on the…

With finger type condenser and 0-3mm PTFE stopcock for reflux control. Glass stopcocks on manifold and reflux arms can be used to isolate head from receiver so that receiver contents can be removed without disturbing the vacuum in the system. With condenser on takeoff arm and 10/30 thermometer joint…

…vacuum jacketed, unsilvered. Allihn condenser is 250mm. Adapter at top has two hose connections for maintaining inert atmosphere. Stopcocks are 2mm bore PTFE. Joint on lower drain arm is 14/20, all others 24/40. Complete unit consists of adapter, condenser, storage head, column, flask and mantle.…

With the condenser being a combination of a cold coil and Leibig. Top outer joint is a 10/18 for use with a 50mm immersion thermometer. For best result, use D272440.

With finger type condenser and Newman type stopcock for reflux control. Stopcock manifold and reflux stopcock can be used to isolate head from receiver so that receiver contents can be removed without disturbing the vacuum in the system. Both column joint and receiver joints are 24/40. Thermometer…

…micron porosity fritted disc sealed between the lower inner and top outer joint to prevent the contents of the flask from entering into the condenser in the event of bumping. All traps have a Standard Taper 24/40 top outer joint Manufactured from 33 expansion, low extractable borosilicate…

…low holdup automatic head which can be completely disassembled for easy cleaning or replacement of parts. Lower column joint and side arm for condenser are 24/40. Joint on takeoff arm is 28/11. The plunger guide is 19/38 and the 10/30 thermometer joint may be used with our 8314 product family…

…with this Cubelet Ice and Water Dispenser. Stand not included. Dimensions: 26"W x 22-1/2"D x 40"H Up to 618 lbs of ice produced per 24 hours Up to 40 lbs of built-in storage capacity 26"W wide profile Air-cooled, Ice and Water Dispenser Dispenses cubelet ice and water Durable…