Double-Sided Adhesive Film for Laboratory Container Mounting CONVENIENT - No more fumbling with clamp VERSATILE - Use with rockers, shakers, incubators or nutators STRONG - Easily rock and roll up to 300rpm and beyond* LONG LASTING - Re-usable based on load capacity and vessel…

Specially designed sheets readily accept laser printing Heat-resistant, stay-flat sheets will not jam in printer Chemically inert polyester Will not dry up or fall off Easy to write on and smear-resistant Laser Tough-Tags withstand steam-autoclaving, boiling water baths, humid incubators,…

Each Chamber is an anodized aluminum block. Excellent temperature conductors. Use with hot plates or with our Ice Pans & Ice Buckets. NOTE: Does not fit CoolSafe System; use separately

Cryogenic labels (Cryo-Babies are the small sizes and Cryo-Tags are the larger), are flexible polyolefin labels that withstand conventional and cryogenic storage conditions (vapor and liquid phase nitrogen storage at -196°C). The labels are chemically inert with a solvent resistant acrylic…

For use as Stand-alone units or with Ice Pans *not compatible with CoolSafe

No adhesive residue: completely dissolves in any temperature water Environmentally safe: 100% bio-degradable and FDA compliant Temperature resistant: store at room to moderate freezer temperatures Laser printable: readily accepts laser printing for quick and easy labeling

Label Size: 1.28” x 0.50” with 0.375” spot (33 x 13 mm with 9.5 mm spot) Use: 1.5 mL tubes Sheet Layout: 4 sets across x 17 sets down Labels/sheet: 68 sets

For Easy Pipetting and Identification of Samples in Microplates A thin, plastic card that slips under the well plate, providing sharp, alpha-numeric characters to identify each sample in a 96-, 48-, or 24-well microplate. No more cross-referencing headaches! Multi-Color Well…

Breathe-EASIER (a white non-woven rayon membrane) transmits water vapor 6 times faster than Breathe-EASY for accelerated growth. Membranes are ideal for cell growth, concentrating samples (e.g. freeze drying), and gas exchange. Easy microtube cap closure. Will not bind in centrifuge rotors. …

Ideal for 384-well plates, half skirted PCR plates, petri dishes, CD cases and more Label Size: 2.625" x 0.1875" (67mm x 5mm ) Ideal Use: General Purpose Sheet Layout: 3 across - 33 down Labels/Sheet: 99 Colors: White U of M: 2,475/pack

Fine Detail: Print text & barcodes with 300 DPI resolution, Easy to Use: Comes with Label LIVE design software for Windows and macOS, Easy Adjustment: Fully adjustable sensor for use with a variety of label sizes, Wide Print Width: Full-size print up to 4" (102mm), High Capacity: Fits roll…

Great for freezer or liquid nitrogen storage. Solutions for cryogenic vials and tubes. Cardboard freezer boxes will fit all standard 2 in. and 3 in. racks. Multiple divider options to accommodate most tube requirements.

Label Size: 0.875" x 0.875" (22mm x 22mm) Ideal Use: Microscope Slides Sheet Layout: 8 across - 12 down Labels/Sheet: 96 Colors: White, Blue, Green, Orange, Red, Yellow or "Rainbow Pack" U of M: 2,400/pack Rainbow Pack: Includes 5…

Clear Laser Tough-Tags 1.50 x 0.75" Label Size: 1.50" x 0.75" (38mm x 19mm) Ideal Use: General Purpose Sheet Layout: 5 across - 12 down Labels/Sheet: 60 Colors: Clear U of M: 1,200/pk Clear Laser Tough-Tags 1.50 x 0.50" …

Ideal use: 1.5ml tubes Will not jam in printer Label sheets are specially top-coated to readily accept laser printing. Heat-resistant, stay-flat sheets will not jam laser printers. Durable labels are made of a flexible polyolefin material and use an acrylic adhesive that…

Pre-cut, Peel-off Labels for Thermal Transfer Printers Xylene-Resistant - Polyester labels provide strong solvent resistance, specifically to multiple xylene washes as well as longer term exposure to xylene. Versatile - Temp. Range: -40°C to 121°C. Xylene labels resist…

Sheet Size: 8.50" x 11" (216mm x 279mm) Ideal Use: Cut to size Colors: White U of M: 25 sheets/pack

Achieves accurate pipetting by allowing the flexibility to adjust the angle of the microplate (45° max. tilt).  The stand takes up little benchtop space measuring only 6"L x 4.50"W x 2.50"H. Well Orienters are sold separately.

Our label sheets are specially designed to permanently accept laser printing. Sheet Size: 8.5" x 11" (216mm x 279mm) Ideal Use: Cut to Size U of M: 20 sheets/pack

Top loading Secure Cutting edge The Tough-Tags Station securely holds up to six standard size boxes of Tough Tags. It's top loading so users can easily insert rolls or remove empty boxes. A specially designed top rail holds tags securely in place. Built-in cutting edge allows easy liner…

Chemically inert polyester Will not dry up or fall off Easy to write on Smear-resistant Sidewall Tough-Tags withstand steam-autoclaving, boiling water baths, humid incubators, freezing temperatures to -20°C, organic solvents, caustic agents and other challenges without peeling.…

Permanently label mutliple microplates with clear Well Orienter Stickers. Each well is clearly marked with its corresponding row number and column letter for easy cross-referencing. The paper backing is scored in the middle allowing for easy aligning on the underside of the plate.

Easy Microplate Viewing for Pipetting and Liquid Transfer The Pipettor Guide features a plastic sliding guide to help align your Pipetter with the microplate wells. The sliding guide is clearly marked with column letters for fast and easy orientation. The Guide is compatible with multi-channel…

Durable  Made of triple density expanded polystyrene creating a durable container that is virtually unbreakable  Super Insulating Preserves ice up to 30% longer than conventional ice pans Stackable Designed with an inner edge enabling the pans to stack on top…

The Double Chamber fits two 96-well PCR trays or individual tubes and strips. Each edge can accommodate up to (12) 0.5ml and (8) 1.5ml tubes. Great for temperature sensitive liquid transfers. It measures 6 3/16 x 6 1/2 x 1 inches. NOTE: Does not fit CoolSafe System; use separately

Formula: Formula Weight: CAS Number: Synonym(s):

Universal, three position acrylic stand with neoprene pad for supporting tube racks. Fixed angles at 25°, 35°, and 45° Size: Holds racks up to 5.50” high and 8.50” wide Ideal Uses: Holding tube-filled racks at a comfortable positing for easier pipetting

Thermal Transfer Labels for Storage in Temperatures from -40°C to 150°C For Use with Thermal Transfer Printers Unique solvent-resistant, acrylic-based adhesive provides excellent cold temperature performance Specially coated for use with a resin ribbon that provides the best…

Ideal for cold storage, moderate and high temperature incubation, protection of light sensitive samples and high throughput samples Strong 2.7 mil thick pierceable aluminum film Non-cytotoxic and sterile Temperature stable from -80°C to 110°C Resistant to DMSO, chemicals,…

Durable  Made of triple density expanded polystyrene creating a durable container that is virtually unbreakable  Super Insulating Preserves ice up to 30% longer than conventional ice pans Stackable Designed with an inner edge enabling the pans to stack on top…