Pre-cut, peel-off, labels sized to fit microcentrifuge tubes Tubes with tags slide easily in and out of rotors Chemically inert polyester Will not dry up or fall off Easy to write on Smear resistant Microcentrifuge Tube Tough-Tags withstand steam-autoclaving, boiling…

Specially designed sheets readily accept laser printing Heat-resistant, stay-flat sheets will not jam in printer Chemically inert polyester Will not dry up or fall off Easy to write on and smear-resistant Laser Tough-Tags withstand steam-autoclaving, boiling water baths, humid incubators,…

For use as Stand-alone units or with Ice Pans *not compatible with CoolSafe

Sterile &?Non-Cytotoxic - Sterilized by gamma irradiation. Films are also free of cytotoxins. Prevent Contamination - Films eliminate well-to-well contamination, microbial and viral contamination, evaporation (excluding breathable membranes) and sample spillage. Ideally Sized and…

Unique "trough within a trough" maximizes reagent recovery Convenient pour-off spouts on all four corners A wide base provides stability and avoids spills Graduated marks on inside wall Superior design provides stronger sidewalls Sterilized by gamma irradiation …

Achieves accurate pipetting by allowing the flexibility to adjust the angle of the microplate (45° max. tilt).  The stand takes up little benchtop space measuring only 6"L x 4.50"W x 2.50"H. Well Orienters are sold separately.

Stickers for labeling petri dishes PetriStickers allow for petri dishes to be labeled quickly, neatly and reliably. Made with water-resistant ink, substrate and adhesives and will remain firmly attached at temperatures from 42° to 4°C. Simply remove the label's protective backing…

Label Size: 1.28” x 0.50” with 0.375” spot (33 x 13 mm with 9.5 mm spot) Use: 1.5 mL tubes Sheet Layout: 4 sets across x 17 sets down Labels/sheet: 68 sets

Gel Drying Frames allow researchers to quickly and easily dry gels between two sheets of cellophane without the use of expensive heat/vacuum gel dryers. The 24 x 24cm frames allow for drying of larger format gels, while the 14 x 14cm frames are ideal for mini gels and other smaller formats.

Labels for Moist, Frosty or Frozen Surfaces "Grips" to wet, frost-covered and frozen surfaces Temperature resistant to -80°C Compatible with centrifuge rotors Resistant to chemicals and solvents Adheres to plastics, glass, metals and even paperboard boxes …

Gas permeable sealing membranes for microtubes Multiple uses Thermal and chemical stability Centrifuge compatible Gamma irradiated Breathable Breathe-Easy and Breathe-Easier microtube sealing membranes offer two rates of gas exchange to meet your requirements for cell…

Ideal sealing tape for petri dishes and microplates Stretches and conforms Waterproof and temperature and chemical resistant Resists abrasion and puncture while blocking vapor loss Reduces the rate of gas exchange and prevent the entry of contaminants

UNIMPEDED CELL GROWTH - Strips allow for beneficial exchange of oxygen and CO2 for cellular growth MICROBIAL BARRIER  - Prevent microbial and viral contamination during growth and storage of cells IDEAL DESIGN - Strip design allows film to be protected during application; a tab…

Label Size: 0.875" x 0.875" (22mm x 22mm) Ideal Use: Microscope Slides Sheet Layout: 8 across - 12 down Labels/Sheet: 96 Colors: White, Blue, Green, Orange, Red, Yellow or "Rainbow Pack" U of M: 2,400/pack Rainbow Pack: Includes 5…

Durable, heat-resistant, solvent-proof laboratory sealing film Chemically resistant Heat resistant & Microwave compatible Tight sealing Tear resistant DuraSeal™ the durable, heat and solvent-resistant stretch film, has substantial advantages over common laboratory…

Durable  Made of triple density expanded polystyrene creating a durable container that is virtually unbreakable  Super Insulating Preserves ice up to 30% longer than conventional ice pans Stackable Designed with an inner edge enabling the pans to stack on top…

Label Size: 1.28" x 0.50" (33mm x 13mm) Ideal Use: 0.5ml tubes Sheet Layout: 5 across - 17 down Labels/Sheet: 85 Colors: White, Blue, Green, Orange, Red, Yellow or "Rainbow Pack" U of M: 2,125/pack Rainbow Pack: 1 includes 5 sheets of each color: Blue, Green,…

Durable  Made of triple density expanded polystyrene creating a durable container that is virtually unbreakable  Super Insulating Preserves ice up to 30% longer than conventional ice pans Stackable Designed with an inner edge enabling the pans to stack on top…

Easy Microplate Viewing for Pipetting and Liquid Transfer The Pipettor Guide features a plastic sliding guide to help align your Pipetter with the microplate wells. The sliding guide is clearly marked with column letters for fast and easy orientation. The Guide is compatible with multi-channel…

Biodegradable - Using a special additive to PET, our reservoirs will safely degrade over time. 100% Eco Friendly - Each case of Bio-Pure Reservoirs are packed in bio-degradable bags and recycled cardboard cases

Each Chamber is an anodized aluminum block. Excellent temperature conductors. Use with hot plates or with our Ice Pans & Ice Buckets. NOTE: Does not fit CoolSafe System; use separately

Durable  Made of triple density expanded polystyrene creating a durable container that is virtually unbreakable  Super Insulating Preserves ice up to 30% longer than conventional ice pans Stackable Designed with an inner edge enabling the pans to stack on top…

Tough-Spots are chemically inert and flexible white and colored polyolefin labels that adhere to most plastics as well as glass and metals. These labels withstand temperatures from +100°C to -196°C (vapor and liquid phase nitrogen storage, up to moderate oven temperatures) and can…

Permeable and inert Reusable after cleaning Can be cut to size with scissors Can be used as a permeable stacking spacer and support for gels during stain and destain procedures Polypropylene mesh is approximately 1/3 mm thick with 1 mm strand spacings and approximately 70% void volume. This…

Laboratory labels formatted for laser printers. Tough-Tags® are chemically inert laboratory labels that strongly adhere to microtubes, test tubes, storage boxes and microscope slides. They resist organic solvents and caustic agents. Tough-Tags® are perfect for accurately…

Strong, durable, oil & abrasion resistant, waterproof, and non-staining Great for general identification and color coding Temperature Range: -23° to +121°C Accepts marking using pen, pencil, or permanent marker Stick to most surfaces including glass, plastic, and metal …

For Easy Pipetting and Identification of Samples in Microplates A thin, plastic card that slips under the well plate, providing sharp, alpha-numeric characters to identify each sample in a 96-, 48-, or 24-well microplate. No more cross-referencing headaches! Multi-Color Well…

Our label sheets are specially designed to permanently accept laser printing. Sheet Size: 8.5" x 11" (216mm x 279mm) Ideal Use: Cut to Size U of M: 20 sheets/pack

Label Size: 1.28" x 0.50" with 0.375" spot (33mm x 13mm with 9.5mm spot) Ideal Use: 1.5ml tubes Sheet Layout: 4 sets across - 17 sets down Labels/Sheet: 68 sets Color: White U of M: 1,360/pack

Double-Sided Adhesive Film for Laboratory Container Mounting CONVENIENT - No more fumbling with clamp VERSATILE - Use with rockers, shakers, incubators or nutators STRONG - Easily rock and roll up to 300rpm and beyond* LONG LASTING - Re-usable based on load capacity and vessel…

Chemically inert polyester Will not dry up or fall off Easy to write on Smear resistant Teeny Tough-Tags withstand steam-autoclaving, boiling water baths, humid incubators, freezing temperatures to -20°C, organic solvents, caustic agents and other challenges without…