Water Quality
-
-
Range: 0.5 to 14mg/L Parameter: Nitrate Method: 2,6 Dimethylphenole For use in test kits, colorimeters and spectrophotometers Case of 24 Manufacturer Part No: LOV-2420702
-
Sulfide Test Kits
LaMotte3322 Octa-Slide Comparator System For determining total sulfide Sufficient for 50 tests NPDES-EPA accepted Unit uses the Pomeroy methylene blue method for analysis. Total sulfide is determined using a color dye, which is added to an un-reacted sample until it matches a reacted…
-
Nickel Test Kit
LaMotteOctet Comparator For detection of nickel in waste effluents and water supplies Employs dimethylglyoxime method Octet Comparator has color standards representing 0.5, 1.0, 2.0, 4.0, 5.0, 7.5, and 10.0 ppm nickel Sufficient for 20 tests
-
MQuant™ Sulfite, Test Method: colorimetric with test strips
MilliporeSigmaMethod: colorimetric with test strips 10 - 40 - 80 - 180 - 400 mg/l SO3 2- MQuant™ Storage class: 10 - 13 Other liquids and solids Storage: Store at +2°C to +8°C. The sulfite test is suitable for food analysis, particularly in the testing of wine and…
-
QUANTOFIX Peracetic Acid 2000-100 strips
MACHEREY-NAGELQUANTOFIX Peracetic acid 2000 semi-quantitative test strips for the determination of peracetic acid. Measuring range: 0-500-1000-1500-2000 mg/L
-
Nitrate CHEMets Kit, Range: 0-3.4 ppm
CHEMetricsNitrate is the most completely oxidized form of nitrogen. It is formed during the final stages of biological decomposition, either in wastewater treatment facilities or in natural water supplies. Low-level nitrate concentrations may be present in natural waters. However, a Maximum Contaminant Level…
-
-
Nitrogen, Nitrate/Nitrite: Excessive amounts of nitrate or nitrite in water can cause infant death, adult illness, and produce spontaneous abortion in cows. Some wells contain high levels of nitrate. When water contains high nitrate levels, nitrites often are present in low concentration. …
-
Bromine CHEMets Kit
CHEMetricsBromine, a less volatile compound than chlorine, is used as a sanitizing agent in drinking water systems, swimming pools, and spas. The bromine test method employs the DPD chemistry. Potassium iodide is added to the sample before analysis. Bromine reacts with the iodide to liberate iodine. The…
-
AquaComparator Test Kit Line
LovibondLow Cost, Easy to use kits for testing a wide range of water quality Parameters Continuous gradient color disks provide accurate measurements—no need to “extrapolate” between discrete color blocks Rotate the color wheel to obtain a color match with the reacted sample and read your result…
-
Test Kit Components
LaMotteDirect Reading Titrator, Syringe Type For use in LaMotte field titration kits as well as in standard laboratory procedures such as dilutions and solution dispensing Plunger and barrel of propionate plastic; barrel has Luer slip tip Capacity 1 mL All-purpose…
-
-
Alkalinity Test Kits
LaMotteDirect Reading Titrator Method (9859A70 and A71) For determining total (T) alkalinity in water Range of 0 to 200 ppm as CaCO3 in 4 ppm increments Employs APHA Method 403. Sufficient for 50 tests at 200 ppm. Direct Reading Titrator (9859B10) For determining phenolphthalein (P)…
-
Chromium Test Kit Reagent Refill
LaMotteOctet Comparator Method For determining hexavalent, trivalent, and total chromium Octet comparator has color standards representing 0.1, 0.2, 0.4, 0.6, 0.8, 1.0, 1.2 and 1.5 ppm Cr Sufficient for 20 tests Test requires suitable hot plate, not included Reagent Refill only. …
-
Paper Iodine Test 200 Tests
LaMotteThe Iodine test papers are a convenient way to test Iodine in water with fast results. Range and sensitivity is 0, 30, 60, 120, 180 ppm.
-
POOL MGR. Kit
LaMotteThe special rugged POOL MGR. kit series is for the public pool operator. The precise Octa-Slide 2 comparator system is used to comply with regulatory standards. The POOL MGR. series includes diagrammed instructions, saturation index calculator, water quality handbook, and the reliable Octa-Slide 2…
-
Coliform Test Kit
LaMotteYes/No qualitative test Sensitivity less than 2.2 per 100 mL of sample No incubation equipment required; only room temperature
-
LaMotte Nitrate #1 Tablet
LaMotteTests the quality of water, these nitrate #1 tablets are part of the nitrate-nitrogen kit.
-
Cyanide (Free) CHEMets Kit
CHEMetricsCyanide is used in many chemical and refining processes. It is found in effluent from electroplating and metal cleaning operations, coke ovens, steel manufacturing facilities, and gas scrubbers. Although cyanide can be safely removed by alkaline chlorination, its acute toxicity to aquatic life…
-
BrewLab® Basic
LaMotteTest for 7 Essential Factors Chloride Sulfate Alkalinity Total Hardness Calcium Hardness Magnesium Hardness Sodium
-
Sodium Test Kit
LaMotteDirect Reading Titrator For determining levels of sodium in natural and treated waters Range 0 to 500 ppm sodium in 10 ppm increments Test requires three titrations: one to determine bicarbonate and carbonate ions; one to determine sulfate and chloride ions; and one to determine calcium and…
-
-
One Drop Ind. 1.0-11.0
Micro EssentialHydrion pH Indicator Solution kits feature specially formulated concentrated indicator solutions. Just one drop of the indicator solution added to 4 ml. of sample solution will provide an accurate ph reading, displayed in bright easy to view colors. 1-11 Hydrion pH Wide Range Indicator…
-
-
QUANTOFIX Chlorine 500-100 strip box
MACHEREY-NAGELQUANTOFIX Chlorine 500 semi-quantitative test strips for the determination of chlorine. Measuring range: 0-25-50-100-250-500 mg/L Cl2
-
Silica Test Kit
LaMotteOctet Comparator For determining silica in natural and industrial waters Employs modified APHA Method 425D Octet Comparator has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0 and 10.0 ppm silica Sufficient for 50 tests
-
QUANTOFIX Multistick for aquarium owners
MACHEREY-NAGELQUANTOFIX Multi stick for aquarium owners are the semi-quantitative test strips for the determination of the total hardness (Ca 2+ , Mg 2+ ), carbonate hardness (HCO 3 -, CO 3 2-) and the pH value of aquarium water. Measuring range: 0-6.3-12.5-18.8-25.0-31.3 °e (total hardness)…
-
Reagents Chlorine is the most widely used disinfectant for drinking water and is also important for sanitizing swimming pools, cooling towers, other industrial equipment and treatment of wastewater. Its measurement and control are vital for both safety and economic reasons. Many Hach chlorine…
-
Molybdate CHEMets Kit, Range: 0-7 ppm
CHEMetricsMolybdate is used throughout the industrial water treatment and power generation industries as a corrosion inhibitor in both open- and closed-loop cooling water systems. In solution, molybdate anions complex with oxidized iron to form a protective film of molybdate and ferric-oxide. Molybdate is…
-
No color matching, no look up charts, no guessing! The unique, multi-test ColorQ pool and spa hand-held photometer reads SEVEN test factors (Free Chlorine, Total Chlorine, Bromine, pH, Alkalinity, Calcium Hardness, and Cyanuric Acid) directly on a digital display. Featuring an innovative…
-
A complete outfit for pond fish culture, ideal for fresh water analysis. Nine critical test factors can be efficiently and accurately determined on-site. Designed with field analysis as a priority; all reagents, components and accessories are arranged in pre-drilled ethafoam. Short form…