Tubes, 15 mL, Burets
-
Screw caps tubes and polypropylene caps
AlphaGem Bio, IncSuperior sealing with Patented Dual α Ring Seal technology, patent number D869275 Manufactured with ultra pure gasket seal materials in caps and medical grade ultra clear USP class 6 plastics for Tubes Double Start Threads provides greater thread contact area for superior strength…
-
These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…
-
Graduated Reusable Centrifuge Tubes with Screw Caps
DWK Life Sciences (Kimble)Standard Taper KIMAX® tube with a screw thread finish Graduated and calibrated to contain Cap supplied has cemented-in white rubber liner and is packaged separately Scale, legend and marking spot are durable white ceramic enamel Replacement cap for 0493K43 & 0492Y27 is 45066B …
-
1.5 mL Easy-Click Graduated Microcentrifuge Tubes, Small Cap, Clear
labForce® (powered by Thomas Scientific)1.5mL Easy-Click Graduated Microcentrifuge tubes feature a small, easy-to-open cap. Graduated every 100µL for easy volume identification Small cap allows tubes to be spaced closely together in racks and storage boxes Frosted Cap and writing panel allows for an extra writing room and…
-
Protein LoBind® Tubes
EppendorfEppendorf Protein LoBind Tubes are specifically designed for use in proteomics or other fields of protein research, where protein concentration tend to be very small and sample recovery is vital for assay results. Significantly more protein can be recovered for downstream analyses and enzymes…
-
Eppendorf Conical Tubes
EppendorfNo Compromise! The Eppendorf Conical Tubes 15 and 50 mL meet the highest demands of diverse laboratory applications. The outstanding quality and specifications make them ideally suited for cell biology applications as well as for sample preparation protocols in microbiology and molecular biology…
-
PYREX® VISTA Culture Tubes
CorningReusable PYREX rimless culture tubes offer greater convenience in plugging and rack storage. Ends are fire-polished. The 22 and 25mm o.d. tubes do not have marking spots.
-
Screwcap Microcentrifuge Tubes
Globe ScientificThese disposable screwcap microcentrifuge tubes are available sterile or non-sterile. The sterile tubes include a cap with a clear (natural) nitrile o-ring. All are DNase, RNase and Pyrogen free. These disposable screwcap microcentrifuge tubes are available sterile or non-sterile The sterile…
-
Centrifuge Tubes, Disposable, Plain, Snap Cap Finish
DWK Life Sciences (Kimble)Tubes are made from borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. With conical shaped bottoms on the 5, 10, and 15 mL sizes and a bullet-nosed shape on the 50 mL size to withstand centrifugation up to 2980 RCF. The 5, 10, and 15 mL sizes…
-
Ultra-High-Speed 15mL & 50mL Polypropylene Centrifuge Tubes
labForce® (powered by Thomas Scientific)labForce® Ultra-High-Speed 15mL & 50mL Centrifuge Tubes have been designed for high speed centrifugation and meet the demands of the most crucial scientific work. Produced using premium grade USP Class VI resins in an automated, touch free manufacturing process that provides both ultimate…
-
Microcentrifuge Tubes
Celltreat ScientificMicro Centrifuge tubes are available in three sizes; 0.5ml, 1.5ml and 2.0ml. CELLTREAT Micro Centrifuge tubes have an attached flat top cap, engraved graduations and are manufactured from high quality polypropylene. The tubes have a temperature range of -80°C to 120°C. CELLTREAT Micro…
-
Conical Centrifuge Tubes
SimportDisposable tubes are suitable for general centrifugation, urinalysis procedures and serum separation 15 mL polypropylene tubes Chemically clean Metal-free Tubes resist speeds of up to 5,000 rpm Ready-to-use and uniform in size and shape, measuring 17 x 120 mm. Graduations are at 0.25, 0.5,…
-
Premium quality, 1.5 mL tubes Leak tested to 20,000 RCF Attached lid Uniform lid membrane thickness Frosted writing area Attached lids provide a tight leakproof seal, can be easily opened and allow trouble-free piercing. Tubes are leak tested to 20,000 RCF for 20 minutes…
-
Centrifuge Tubes
BiologixTubes: made of strong, highly transparent medical grade polypropylene Flat-top caps: made of medical grade polyethylene Plug-seal screw on caps: made of medical grade polypropylene 15ml and 50ml conical tubes available; large white writing area for easy marking Double threaded design…
-
Microcentrifuge Tubes in Self-Standing Bags
Globe ScientificGlobe Scientific is pleased to expand on this line of premium quality microcentrifuge tubes with attached snap caps. The polypropylene (PP) tubes are resistant to most chemical reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements.…
-
1.5mL SuperSlik® Polypropylene Microcentrifuge Tubes with Low Protein Binding surface for use with viscous samples. Designed to improve yields. Include flat caps and writing surface. In resealable bags. With flat snap caps, side graduations, and frosted writing surface Ultra low fluid…
-
Sterile, and individually wrapped RNase, DNase and Pyrogen free Easy peel wrappers Flat markable screw-caps MTC Bio has taken the same screw-cap conical tubes that you know and trust and repackaged them in to individual sterile packets. No more fumbling around with open bags or…
-
PYREX® Rimless Culture Tubes
CorningThese reusable PYREX® rimless culture tubes offer greater convenience in plugging and rack storage. Walls and bottoms are of uniform thickness. Ends are fire-polished.
-
G-Tube Microcentrifuge Tube
Bio PlasNo special locking cap devices needed Over 30,000 x g without cap locks Available in 0.6 mL, 1.5 mL and 2.0 mL Safe sample deposit All three volumes available in siliconized polypropylene The cap of the G-Tube is designed so no special locking device is needed. The cap…
-
BRAND Microcentrifuge Tubes
BrandTech®BRAND microcentrifuge tubes fit most common rotors and may be spun up to 30,000 RCF (g) (10,000 x g for 0.5mL; 20,000 x g for 1.5mL; 30,000 x g for 1.5mL and 2.0mL with lid closure at 20°C for 20 min). Manufactured from virgin polypropylene, these highly translucent tubes are free from flash,…
-
Biologix clear polypropylene non-sterile (rnase & dnase free) conical bottom microcentrifuge tubes with safe lock or flat top caps available. Tubes have frosted writing area and marked graduations.
-
Withstand 17,000 x g Made of polypropylene RNase/DNase free Our original micro tubes were introduced in 1978. Two decades later, thousands of laboratories are still using them, thanks to their broad selection and reputation for reliability. Although we have subsequently introduced…
-
Screw Top Micro Tubes, Sterile Assemblies
Celltreat ScientificHigh temperature resistivity range – shatter/crack resistant and ideal for boiling Easy ¾ turn to open and close Sterile Assemblies packed in self-standing re-sealable bags offer a unique storage solution Grip band tubes feature ribs that provide exceptional gripping surface…
-
Improved design for secure sample preparation and storage Withstand centrifugation up to 3,000 RCF Manufactured from Pyrex® Type I borosilicate glass Available in 3 sizes: 5, 10 and 15 ml Disposable glass centrifuge tubes are convenient and economical. Redesigned with…
-
15mL Conical Tubes
MP Biomedicals15mL graduated conical tube. Great for use as a general purpose tube.
-
Eppendorf Safe-Lock Tubes are the result of 50 years of continuous improvement and development. The original Safe-Lock tubes protect your sample with excellent centrifugation stability, feature perfect sealing properties, and reliably prevent sample evaporation. Trust in the original Eppendorf…
-
Labcon UVSafe™ tubes are designed to block 100% of Ultra violet light. They can be used instead of foil to shield samples sensitive to UV band radiation. They have been lab tested and certified to block UV light, but will still pass visible light so you can see your sample volume.…
-
Microcentrifuge Tubes with Snap Caps
Globe ScientificThese polyropylene microcentrifuge tubes feature attached leak-resistant flat snap caps. Each tube is molded with precise graduation marks for accurate measurements. Mfr. No. 111562 & 111572 These 1.5mL and 2mL microcentrifuge tubes are lot certified to be RNase free, DNase free,…
-
Conical Bottom Centrifuge Tubes
Thermo Scientific NalgenePolycarbonate open-top tubes have outstanding mechanical strength. Excellent for whole cell separations. For use up to 6,000 x g in refrigerated or non-refrigerated centrifuges. Translucent polypropylene copolymer has excellent chemical resistance. For low-speed centrifugation up to 6,000 x g. Both…
-
NEST Centrifuge Tubes
NEST Scientific USA601201 / 602201 NEST centrifuge tubes feature black printed graduations and a large white marking field. Premium Meet the requirements of analytical level High strength non-toxic materials Raw material comply with USP VI requirements Standard &…
-
SuperClear® tubes offer you a standard of performance not available from other brands of centrifuge tubes. These tubes are made from a unique medical grade resin that is far more durable than commodity grade resins used in most other brands of tubes. This high quality resin makes it possible…
-
15 & 50mL Black Centrifuge Tubes
Celltreat ScientificAvailable in 15mL opaque black to protect light sensitive compounds Large white marking area provides excellent contrast for identification All tubes are manufactured from high quality polypropylene and have smooth, flat surface polyethylene (HDPE) caps Maximum RCF is 12,000g for 15mL…