Pyrex Tubes

Single use culture tubes are housed in easy-to-open, easy-to-use packaging. The three small sizes come in a dispenser arrangement while the larger sizes are bulk-packed. Culture tubes are made of borosilicate glass to reduce pH changes and contaminants that could potentially leach from…

With lip Tubes 10 mm through 18 mm o.d. have marking spot. Listings indicate length x o.d. in mm.

For use in hybridization incubators with rotators Three sizes Include GL 45 plug-seal screw caps Graduated A convenient method which requires smaller probe solution volumes. Three lengths (100, 150 and 300 mm) fit most popular hybridization apparatus. Caps have silicone O-rings…

27mm tubes (Thomas No. 0319Y64) These 27mm inner diameter PYREX® filter tubes have an 8mm. O.D. by 75mm long constricted lower end. They can be used on the bottom end of 30mm O.D. PYREX® Gooch Low Form fritted disc crucibles to collect the filtrate. Also for use with porcelain plates. …

…from Pyrex® Type I borosilicate glass Available in 3 sizes: 5, 10 and 15 ml Disposable glass centrifuge tubes are convenient and economical. Redesigned with more consistent uniform wall thickness and a well-formed conical tapered tip and durable tip radius, tubes are ideal…

Graduated Capacity 5 mL in 0.1 mL divisions, with conical tip and Standard Taper 9 ground glass stopper, Thomas number 8770J22 Length including stopper, 140 mm; o.d. 13.5 mm

Without stopper, pear shaped 58 mm o.d. x 159 mm long Lower stem graduations: graduated upward from 0 to 1 mL in .05 mL divisions Bulb graduations:  from 1 to 5 mL in 1 mL   from 5 to 50 mL in 5 mL   from 50 to 100 mL in 10 mL divisions

Consisting of glass tube 8 mm outside diameter with fritted cylinder, 12 mm diameter, fused onto the lower end; overall length, 250 mm Offered in extra coarse (EC) and coarse (C) porosities

60° angle Three Standard Taper 24/40 joints Approximate length 206 mm This tube is also a replacement for organic chemistry kits. Type I, Class A borosilicate conforming to federal specification DD-G-54 lb and ASTM E 438. Also meets the US Pharmacopoeia specs for Type I borosilicate glass.

…Outflow tubes eliminate the smearing of the definition bands of effluent caused by the tube being filled and solvent mixed before being expelled Outflow tubes are long enough to protrude through a rubber stopper 25 mL tubes take stopper size 00; 125 mL tubes take stopper size 4; 750 mL tubes take…

Reusable PYREX rimless culture tubes offer greater convenience in plugging and rack storage. Ends are fire-polished. The 22 and 25mm o.d. tubes do not have marking spots.

These reusable PYREX® rimless culture tubes offer greater convenience in plugging and rack storage. Walls and bottoms are of uniform thickness. Ends are fire-polished.

Fabricated from specially selected tubing for product durability. Engraved white-filled graduations at 25 and 50 mL .

Graduated Capacity 50 mL Tube has white enamel graduations upward from tip to 10 mL in 0.5 mL divisions and from 10 to 50 mL in 1 mL divisions Tube length is 135 mm, o.d. 28 mm Round bottom tube with pour out spout for easy decanting Wall thickness approximately 1.5 mm; length…

Pear-Shaped In accordance with ASTM D 91, D 96; API Standard 2500 Capacity 100 mL Calibrated "to contain" Graduations:  from 0 to 1/2 in 0.05  from 1/2 to 2 in 1/10  from 2 to 3 in 1/5  from 3 to 5 in 1/2  from 5 to 10 in 1  from 10 to…

Beaded rim These test tubes are well annealed, resistant to heat and chemically stable. Rims are fire-polished. The 25mm tube does not have a marking spot.

Wilmad’s WG-1364 series capillary tubes are sealed at one end and provide a low cost solution for small volume NMR measurement. Made of ASTM Type 1 Class A glass Tested at 400 MHz field

These PYREX® 1mL and 2mL Craig Receiver Tubes, Recrystallization Tubes, and PTFE Plugs are replacement parts for Craig Tubes for the 6949M series of PYREX microchemistry kits (Thomas No. 0320H44) .

These Drying Tubes are replacement parts for the 6949M series of PYREX® microchemistry kits.

This specially designed PYREX® inlet tube is a replacement part for the PYREX® Cyanide Distilling Apparatus (No. 3350-C) Used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by means of a reflux-distillation…

Graduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…

These 100mL PYREX® conical centrifuge tubes have white graduations and are used in accordance with standard methods of testing for water and sediment in petroleum products. These tubes are graduated upward to 0.5mL in divisions of 0.05mL; from 0.5mL to 2mL in divisions of 0.1mL; from 2mL to 3mL…

These PYREX® replacement tubes fit the Kuderna Danish Apparatus and have an outer 19/22 Standard Taper joint. The tube graduations go from 0 to 2mL in 0.1mL increments and from 3mL on in 1.0mL increments.

These PYREX® capillary melting point tubes are made from No. 7740 glass.

…but with marking spot Cap not included Disposable Pyrex® culture tubes have a round bottom and come with a white marking spot. These tubes are designed for both tissue culture and general bacteriological work. These tubes are made from borosilicate glass, sold without caps and bulk…

These PYREX® flat bottom reusable culture tubes are ideal for plant tissue culture and general culture work. The flat bottom facilitates use with agar slants. Walls and bottoms are of uniform thickness. The tubes are rimless for greater convenience in plugging and rack storage. Optional…

These Capillary Gas Delivery Tubes are replacement parts for the 6949M series of PYREX® microchemistry kits.

…upward to 0.5 mL in divisions of 0.05 mL , from 0.5mL to 3mL in 0.1 mL divisions, from 3 mL to 5 mL in 0.5 mL divisions and from 5 mL to 100 mL in 1 mL divisions. Made with a 3 mm vent hole located 180° from the front of the tube. Tubes are for testing propane, butane and Isobutane mixtures.

…tube useful for handling of sputum specimens and clinical and microbiological tests Includes phenolic screw cap which has glued-in, white rubber liner 29 x 125 mm. For replacement cap, see Thomas number 2388B73. 2620L52 Heavy wall construction, short conical bottom tube with…

This Connecting Tube is a replacement part for the 6949M series of PYREX® microchemistry kits.

Made of a low expansion borosilicate composition with high chemical resistance Meets all U.S. pharmacopoeia specifications for Type 1A glass 4 to 32mm O.D. sizes are 1219mm long ± approximately 6mm. 4mm O.D. have ends cut, while 5 to 32mm sizes have ends fire polished. 35 to 178mm…