PerkinElmer Laboratory Tubes
-
For the lowest possible detection limits, residual contaminant levels may not be low enough to meet your requirements. UltraClean graphite tubes offer unmatched analytical advantages for special applications such as the determination of extremely low traces of Na, Ca, Fe, Cr and Ni in ultra-clean…
-
GBC Standard Graphite Tube, Pyrolytically Coated
PerkinElmerThe GBC Standard Graphite Tube is pyrolytically coated, D7/3.7x24.2 mm and comes in a quantity of 10. This tube is fit to perform on a GBC atomic absorption (AA) instrument and is the equivelant of GBC part 99-0059-00.
-
The Plateau Graphite Tube for Agilent® is pyrolytically coated, D6.9/4.9x24.9 mm and comes in a quantity of 10. It is fit to perform on atomic absorption (AA) instruments for Agilent® and is equivalent to Agilent® part 63-100011-00.
-
Standard HGA Graphite Walled Tubes
PerkinElmerThese HGA graphite walled tubes are pyrocoated to provide improved sensitivity and tube-to-tube reproducibility. The walled tube should be used in place of L'vov platform tubes when analyzing refractory elements such as Vanadium. NOTE: The tubes do not have an integrated platform and are not…
-
Standard HGA Graphite Tubes with Lvov Groove
PerkinElmerThese HGA graphite tubes are pyrocoated to provide improved sensitivity and tube-to-tube reproducibility. They are slotted to accept L'vov platforms, PerkinElmer part number B3001256. PerkinElmer has over four decades of experience in the design/development of graphite furnace systems and…
-
Standard HGA Graphite Walled Tubes
PerkinElmerThese HGA graphite walled tubes are pyrocoated to provide improved sensitivity and tube-to-tube reproducibility. The walled tube should be used in place of L'vov platform tubes when analyzing refractory elements such as Vanadium. NOTE: The tubes do not have an integrated platform and are not…
-
-
-
The new Advanced Platform design suspends the platform in the tube using three small pins in a triangular layout. This has the advantage of minimizing wall contact and reducing thermal conduction from the tube walls resulting in even and rapid heating almost exclusively from thermal radiation, an…
-
Partition Graphite Tube, Uncoated for Agilent
PerkinElmerThe partition graphite tube for Agilent is uncoated D6.9/3.9x24.9 mm and comes in a quantity of 10. It is fit to perform on atomic absorption (AA) instruments for Agilent and is equivalent to Agilent part 63-100015-00.
-
Hitachi Standard Tube, Uncoated
PerkinElmerThe Hitachi® Standard Graphite Tube uncoated, D7.8/4.7x30 mm and comes in a quantity of 10. The Standard Graphite Tube is fit to perform on a Hitachi® atomic absorption (AA) instrument. It is equivalent to Hitachi® part 180-7400.
-
The exceptionally uniform temperature distribution obtained with transverse heating significantly reduces or eliminates condensation of the sample matrix components and "memory" effects and improves the atomization efficiency for refractory elements. For improved characteristic mass with volatile…
-
The partition graphite tube for Agilent is pyrolytically coated, D6. 9/3. 9x24. 9 mm and comes in a quantity of 10. It has an extended life and is fit to perform on atomic absorption (AA) instruments for Agilent. The extended life partition graphite tube is equivalent to Agilent part 63-100012-EL.
-
The Shimadzu Uncoated Standard Graphite Tube is fit-to-perform on a Shimadzu atomic absorption instrument and is equivalent to Shimadzu part 206-50587.
-
For the lowest possible detection limits, residual contaminant levels may not be low enough to meet your requirements. UltraClean graphite tubes offer unmatched analytical advantages for special applications such as the determination of extremely low traces of Na, Ca, Fe, Cr and Ni in ultra-clean…
-
The new Advanced Platform design suspends the platform in the tube using three small pins in a triangular layout. This has the advantage of minimizing wall contact and reducing thermal conduction from the tube walls resulting in even and rapid heating almost exclusively from thermal radiation, an…
-
Needle Port Tube for Rheodyne Injection Valves, Model 9725/8125/7125/7725
-
These tubes are fit to perform on atomic absorption (AA) instruments for Agilent and is equivalent to Agilent/Varian part 63-100037-00. PerkinElmer supplies a wide range of graphite tubes for non-PerkinElmer instrumentation. Graphite tubes are made with the highest quality material guaranteed to…
-
We offer fit-to-perform Shimadzu Pyrolytically-Coated Graphite Tubes with Built-in Platforms, equivalent to Shimadzu part 206-5887-02RI.
-
The new Advanced Platform design suspends the platform in the tube using three small pins in a triangular layout. This has the advantage of minimizing wall contact and reducing thermal conduction from the tube walls resulting in even and rapid heating almost exclusively from thermal radiation, an…
-
The new Advanced Platform design suspends the platform in the tube using three small pins in a triangular layout. This has the advantage of minimizing wall contact and reducing thermal conduction from the tube walls resulting in even and rapid heating almost exclusively from thermal radiation, an…
-
Standard HGA Graphite Walled Tubes
PerkinElmerThese HGA graphite walled tubes are pyrocoated to provide improved sensitivity and tube-to-tube reproducibility. The walled tube should be used in place of L'vov platform tubes when analyzing refractory elements such as Vanadium. NOTE: The tubes do not have an integrated platform and are not…
-
The spherically shaped platform accommodates up to 50 µL of sample. Graphite tubes with integrated platforms: Provide STPF conditions for volatile and nonvolatile refractory elements due to the significantly higher heating rates of tube and platform, which can be used for all elements. Offer an…
-
Standard HGA Graphite Tubes with Lvov Groove
PerkinElmerThese HGA graphite tubes are pyrocoated to provide improved sensitivity and tube-to-tube reproducibility. They are slotted to accept L'vov platforms, PerkinElmer part number B3001256. PerkinElmer has over four decades of experience in the design/development of graphite furnace systems and…
-
The graphite tube, the heart of the graphite furnace, plays a vital role in the overall stability of an analysis. In order to assure stable analytical conditions from one atomization cycle to the next, and from graphite tube to graphite tube, all graphite parts - contacts, tubes and platforms -…
-
The new Advanced Platform design suspends the platform in the tube using three small pins in a triangular layout. This has the advantage of minimizing wall contact and reducing thermal conduction from the tube walls resulting in even and rapid heating almost exclusively from thermal radiation, an…
-
The spherically shaped platform accommodates up to 50 µL of sample. Graphite tubes with integrated platforms: Provide STPF conditions for volatile and nonvolatile refractory elements due to the significantly higher heating rates of tube and platform, which can be used for all elements. Offer an…
-
Every genuine PerkinElmer consumable and reagent is of high quality and designed specifically for your PerkinElmer instrument. Includes combustion and reduction tubes, reagents and capsules to perform 500 analyses in the CHNS mode. Total amount of runs may vary depending on selected combustion conditions.
-
Quartz Tube with Au/Pt Gauze for Amalgamation System
-
The new Advanced Platform design suspends the platform in the tube using three small pins in a triangular layout. This has the advantage of minimizing wall contact and reducing thermal conduction from the tube walls resulting in even and rapid heating almost exclusively from thermal radiation, an…
-
FIAS-Furnace Sample Transfer Tube, Included in the kit (P/N B3140255)