Same as the 9210E23 series, but caps have Teflon ® overliner bonded to the rubber liner Listings indicate tube length x o.d. in mm

These Nessler tubes are ideal for color comparison and feature cap style stoppers that do not need to be removed to take readings. Shadowless bottom of each tube transmits undistorted light Standard Taper cap style stopper Replacement cap is 15182 (3058L93 & 3058L98) 3058K65 is…

Polypropylene closure Autoclavable Natural For use with the KIM-RAK or other disposable culture tubes.

Excellent choice for general laboratory use Plain top, beaded rim Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

These Nessler tubes are ideal for color comparison. Shadowless bottom of each tube transmits undistorted light Rings and legend are durable white ceramic enamel which correspond with specific volumes of liquid 45315A series is supplied in a matched set of 6 Graduated ring scale of…

For testing ammonia nitrogen “Shadowless” bottom eliminates dark spots caused by distortion of transmitted light. Made of glass specially formulated to be as free of color as possible. Marks have fused-in white filler. Package of six tubes.

Borosilicate glass tubes with fire-polished top rims and uniform wall thicknesses for maximum heat transfer and chemical resistance. The 6 x 50 mm size is often referred to as a “Durham tube” No marking spot Designed from ASTM Specification E982, Type IV requirements …

KIMAX® culture tube intended primarily for use in the testing of milk for the presence of bacteria by the methylene blue reductase test. Smooth, fire-polished rim Graduation line is located at the 10 mL level Durable white ceramic enamel marking spot Described in APHA Standard…

KIMAX® conical bottom centrifuge tube is used for testing of petroleum products according to ASTM D91, D893 and D1796. Tube has a permanent red stripe under the white enamel graduations for easy reading of results Scale and legend are durable white ceramic enamel Top is tooled to…

Borosilicate glass tubes with fire-polished top rims and uniform wall thicknesses for maximum heat transfer and chemical resistance. The 6 x 50 mm size is often referred to as a “Durham tube” No marking spot Designed from ASTM Specification E982, Type IV requirements …

For determination of water and sediment in crude oil Proprietary Permanent Marking Technology Markings and graduations applied using proprietary Lazer-Fused™ technology Superior resistance to aggressive solvents used in separation processing Unmatched readability and line…

Tubes are made from borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. With conical shaped bottoms on the 5, 10, and 15 mL sizes and a bullet-nosed shape on the 50 mL size to withstand centrifugation up to 2980 RCF. The 5, 10, and 15 mL sizes…

Graduated and calibrated to contain Scale is durable white ceramic enamel Made with heavier walled tubing to withstand higher centrifugation speed Top has a screw thread finish Autoclavable cap with rubber liner is included but not attached Replacement cap is 45066B Manufactured…

The top graduation line on unmatched Kimble Nessler Color Comparison Tubes may be any distance from the outside bottom within the range of scale lengths shown in individual descriptions. In matched sets, the top graduation lines of all the tubes in a set will be within the very close limits…

KIMAX tube used for the determination of small quantities of solids in large volumes of liquids. Calibrated to contain. Stem is graduated in 0.01 mL to 0.2 mL and the body has graduations at 25, 50, and 100 mL. Recommended for the determination of free water and sediment in diesel and other…

Can be used in the determination of residues in liquified petroleum (LP) gases, ASTM Method D 2158 Calibrated "to contain" Capacity 100 mL Graduations: 0 to 1 in 0.05 mL Dimensions: 37 mm o.d. x 203 mm L.

Borosilicate Glass Tubes with 1-3/8" Vertical Labels These Chase brand Mark-M™ glass culture tubes feature a permanent vertical ceramic label, fused to the glass, which is easily written on with marker or pencil. Permanent marking spots Borosilicate glass tubes have…

Deep form, of black phenolic resin with cemented rubber liner. As supplied with 4893D11 series Flasks and 9210E23 series Test Tubes. Can be autoclaved for 20 minute periods at 121°C. Rubber liners have been found to be satisfactory for tissue culutre. Cap size shown is GPI thread finish.

Tubes are suitable for tissue culture work and general bacteriological use. Tubes are made from KIMAX-51 borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. Each tube has a chevron marking area. Trays are shrink wrapped in plastic film in modular…

Plain Soda Lime Glass Tube, 18x150mm, Plain

These Chase brand Mark-M™ glass culture tubes feature a permanent vertical ceramic label, fused to the glass, which is easily written on with marker or pencil. Permanent marking spots Labels are located 3/4" from the open end All tubes have sturdy, uniform bottoms and…

Standard Taper KIMAX® tube with a screw thread finish Graduated and calibrated to contain Cap supplied has cemented-in white rubber liner and is packaged separately Scale, legend and marking spot are durable white ceramic enamel Replacement cap for 0493K43 & 0492Y27 is 45066B …

With marking spot and deep form, black phenolic plastic caps with cemented rubber liners Caps are autoclavable; see 9210R18 series for conditions (unattached) Listings indicate tube length x o.d. in mm

These tubes are designed for use with Teledyne Tekmar 2016/2032 Autosamplers and 4100/4200 Automatic Samplers that are equipped with 3/4” diameter mounts. The opening of these disposable tubes is larger and it permits easier sample loading and facilitates the weighing of solid and…

Made with heavier walled tubing to withstand higher centrifugation speeds Top has screw thread finish Cap with rubber liner is included but not attached Replacement cap is 45066B Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438,…

Oil Centrifuge Tube (2623Q31) Kimax® tube used in the determination of bottom sediment and water in petroleum products In accordance with ASTM D 1966, D 96 Stem diameter holds 1.5 mL; capacity 100 mL Calibrated to contain Graduations: from 1.5 to 5 in 1/2 …

Chase brand blood typing tubes feature a permanent ceramic label, fused to the glass, which is easily written on with marker or pencil. Pre-labeled with blood type Convenient package quantities Permanent blue labels placed to allow an unobstructed view of cell suspension …

Made with heavier walled tubing to withstand higher centrifugation speeds. Top is beaded for strength. Graduated and calibrated "to contain". Scale is white ceramic enamel.

With lip and marking spot Made from KG-33 glass tubing Listings indicate length x o.d. in mm.

Standard taper KIMAX tube. Graduated and calibrated "to contain". Top is beaded for strength. Scale, legend and marking spot are printed in durable white ceramic enamel.

Chase brand blood typing tubes feature a permanent ceramic label, fused to the glass, which is easily written on with marker or pencil. Pre-labeled with blood type Convenient package quantities Permanent blue labels placed to allow an unobstructed view of cell suspension …

Heavy wall Screw cap, with round bottom and a slightly constricted neck, finished with screw thread for number 24-410 deep form cap Used for separating neutralized sediment from sputum in the preparation of cultures Available in 35 mL and 50 mL sizes, both of which are 29 mm o.d.…