Glass Tubes With Cap

Compare Tool

Select up to 3 products

Glass Tubes With Cap
1 - 32 of 191
Sort
View
Show
  • Tricorn Columns

    GE Healthcare

    …a 5-mm tube on one side and a 10-mm tube on the other side; and 10-10 is for 10-mm tubes on both sides. Tricorn Packing Equipment includes the Packing Equipment 5/50 (5-mm connector and 50-mm glass tube) or 10/100 (10-mm connector and 100-mm glass tube), EPDM O-rings and bottom unit, cap, and stop…

  • UniPrep Syringeless Filters

    GE Healthcare

    …septum in the cap and can be used to filter larger volumes (1 to 5 ml). The UniPrep Syringeless Filter is selected based on compatibility with the sample in use. In manual operation, the filter-plunger, after the tip comes in contact with the liquid, is slowly pushed into the test tube until it…

  • Whatman UniPrep Syringeless Filters

    GE Healthcare

    …septum in the cap and can be used to filter larger volumes (1 to 5 ml). The UniPrep Syringeless Filter is selected based on compatibility with the sample in use. In manual operation, the filter-plunger, after the tip comes in contact with the liquid, is slowly pushed into the test tube until it…

  • illustra GFX PCR DNA and Gel Band Purification Kits

    GE Healthcare

    …digests. Fast and easy-to-use method with less than 10 min hands-on time. Flexible 10 to 50 ?l elution volume for different DNA concentration needs. Improved column design with increased maximum volume, holding of up to 800 ?l liquid volume (950 ?l without a cap). Highly pure DNA is ready for…

  • PYREX® Screw Cap Culture Tubes with PTFE Lined Phenolic Caps

    Corning

    These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…

  • Culture Tubes, Screw Thread, KG-33 Borosilicate Glass, with Rubber Lined Cap,…

    DWK Life Sciences (Kimble)

    KimCote® plastic-coated culture tube made from tubing with uniform wall thickness for maximum heat transfer and chemical resistance. Thread finish complies with Glass Packaging Institute (GPI) requirements. Cap is not attached. Designed from ASTM E982, Type VI, Class A requirements.

  • Culture, Screw Thread, Borosilicate Glass Tubes

    DWK Life Sciences (Kimble)

    …use. Tubes are made from KIMAX-51 borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. Each tube has a chevron marking area. Trays are shrink wrapped in plastic film in modular trays. Supplied without caps. 73800, 73802 and 73805 for caps.

  • Reaction Monitoring System

    Wilmad LabGlass

    …the sample tube is accessible Permits researchers to run reaction experiments without specialized instruments or equipment Includes an extra black phenolic cap with a white rubber liner for the outer tube allowing for easy sample storage Made from Type 1, Class A Borosilicate Glass

  • Diamond Culture Tube Caps

    Globe Scientific

    These popular caps fit plain end culture tubes and flasks with DeLong style necks or ports. The caps are molded from durable, autoclavable polypropylene (PP). They are available in a full range of five sizes and five colors for easy sample identification and organization. Recommended tube diameter…

  • 12/13mm Snap Cap for Tubes

    Globe Scientific

    …13mm glass evacuated blood collection tubes Fits most 12mm plastic culture tubes Thumb tab for easy removal Polyethylene (LDPE) 1000 caps per sealed bag Assorted colors available These colorful snap on closures are an effective way to recap 13mm blood drawing tubes, glass test tubes

  • Heavy-Duty Graduated Centrifuge Tubes with Screw Caps

    DWK Life Sciences (Kimble)

    …enamel Made with heavier walled tubing to withstand higher centrifugation speed Top has a screw thread finish Autoclavable cap with rubber liner is included but not attached Replacement cap is 45066B Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP…

  • KIMAX Test Tubes with Teflon Liner Caps

    DWK Life Sciences (Kimble)

    Same as the 9210E23 series, but caps have Teflon ® overliner bonded to the rubber liner Listings indicate tube length x o.d. in mm

  • Lysing Matrix B, 2mL Tubes

    MP Biomedicals

    …system. Each impact-resistant 2 mL tube contains 0.1 mm silica spheres. Lysing Matrix B tubes have blue caps and are found in the FastRNA™ Pro Blue Kit and FastProtein™ Blue Matrix. The fast and easy to use protocol ensures successful lysis with even the most challenging samples for…

  • KIMAX Ungraduated Centrifuge Tubes

    DWK Life Sciences (Kimble)

    Heavy wall Screw cap, with round bottom and a slightly constricted neck, finished with screw thread for number 24-410 deep form cap Used for separating neutralized sediment from sputum in the preparation of cultures Available in 35 mL and 50 mL sizes, both of which are 29 mm o.d.…

  • PYREX® Round Bottom Centrifuge Tubes

    Corning

    tube useful for handling of sputum specimens and clinical and microbiological tests Includes phenolic screw cap which has glued-in, white rubber liner 29 x 125 mm. For replacement cap, see Thomas number 2388B73. 2620L52 Heavy wall construction, short conical bottom tube with

  • 16mm Snap Cap for Tubes

    Globe Scientific

    …16mm glass tubes Fits most 16mm glass evacuated blood collection tubes Thumb tab for easy removal Polyethylene (LDPE) 1000 caps per sealed bag Assorted colors available These colorful snap on closures are an effective way to recap 16mm blood drawing tubes and glass test tubes. They…

  • PYREX® Screw Cap Culture Tubes with Phenolic Caps

    Corning

    These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…

  • 13mm O.D. Thin Walled Precision NMR Tubes

    Wilmad LabGlass

    … Made from borosilicate glass that meets the requirement of Type 1 Class A glass from ASTM E438 100% inspection with multiple NIST traceable gauges and optical surface defect checks Include disposable cap Note: Caps are not recommended for use with samples dissolved in chloroform-d…

  • NMR Sample Tubes

    Ampol

    …been required with other manufacturers' tubes may no longer be necessary. All tubes are supplied with end caps. Borosilicate glass Universal use Disposable The UNI-5, universal fit, disposable NMR tube is designed for use with all instruments. Eliminates tube cleaning, allowing…

  • 10mm Screw-Cap NMR Tubes

    Wilmad LabGlass

    Commonly used in sample degasification these tubes can maintain vacuum quality of >10- 4 torr. For better vacuum, please check our Pressure/Vacuum Tube and Quick Pressure Valve Tube. Tube comes complete with open top screw cap and septum. Caps and septa can be ordered separately

  • 15mL Centrifuge Tubes

    Evergreen Scientific

    …outside diameter is 17 mm and the overall length is 120 mm. Strength you can rely on Polypropylene tubes withstand up to 5400 × g and are appropriate for use with stronger acids (except oxidizing acids) or alkalis, alcohols, organic solvents, chlorinated and aromatic hydrocarbons…

  • Tubes 1.6 I.D.X150mm Red Coded

    Chase Instruments

    Chase brand Natelson tubes are manufactured with tapered tips for easy collection of micro blood samples. Designed for use with the Natelson technique Packed in lint-free boxes Ends may be sealed with clay or caps Sodium or lithium heparin is available as a special order Manufactured…

  • Tube Dct No Cap 18-415 20 X 150mm

    DWK Life Sciences (Kimble)

    …use. Tubes are made from KIMAX-51 borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. Each tube has a chevron marking area. Trays are shrink wrapped in plastic film in modular trays. Supplied without caps. 73800, 73802 and 73805 for caps.

  • Culture, Screw Thread, Flat Bottom, Borosilicate Glass Tubes

    DWK Life Sciences (Kimble)

    Tubes are a suitable for tissue culture work and general bacteriological use. With a flat bottom and without a marking area. Flat bottoms contribute to stability when tubes are set on end. Trays are shrink wrapped in plastic film in modular trays. Supplied without caps. See 73800, 73802 and 73805…

  • Heavy-Duty Plain Centrifuge Tubes with Screw Caps

    DWK Life Sciences (Kimble)

    Made with heavier walled tubing to withstand higher centrifugation speeds Top has screw thread finish Cap with rubber liner is included but not attached Replacement cap is 45066B Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438,…

  • PYREX® Disposable Glass Culture Tubes with Marking Spot

    Corning

    …but with marking spot Cap not included Disposable Pyrex® culture tubes have a round bottom and come with a white marking spot. These tubes are designed for both tissue culture and general bacteriological work. These tubes are made from borosilicate glass, sold without caps and bulk…

  • Jacketed CHROMAFLEX® Columns

    DWK Life Sciences (Kimble)

    with ethylene oxide, 2N NaOH or 100% ethanol (autoclaving is not recommended) Columns are supplied complete with glass barrel, water jacket, two end fittings with 20 μm porosity HDPE bed supports, two screw caps, 5 feet (1.5 m) of FEP PTFE tubing (1/16” OD with 1.0 cm; 1/8” OD with

  • PYREX Hybridization Tubes

    Corning

    …hybridization incubators with rotators Three sizes Include GL 45 plug-seal screw caps Graduated A convenient method which requires smaller probe solution volumes. Three lengths (100, 150 and 300 mm) fit most popular hybridization apparatus. Caps have silicone O-rings to ensure…

  • Round Bottom Culture Tubes with Caps

    United Scientific Supplies

    Tubes with round bottoms are manufactured from ASTM E438 Type 1 Class A Borosilicate 3.3 glass. Includes polypropylene autoclavable screw cap with PTFE liner.

  • Tube 100 ml

    Corning

    …in one container. They are also useful for other clinical and microbiological tests. Screw caps resist the effects of temperature and steam. These tubes have a white polypropylene GPI 38-400 threaded cap with a Polytetrafluorethylene (PTFE) liner. For replacement caps, see No. 1261-CO (1234B29).

  • KIMAX Test Tubes With Marking Spot

    DWK Life Sciences (Kimble)

    With marking spot and deep form, black phenolic plastic caps with cemented rubber liners Caps are autoclavable; see 9210R18 series for conditions (unattached) Listings indicate tube length x o.d. in mm

  • Bruker SampleJet NMR Tubes

    Wilmad LabGlass

    Authentic Bruker® SampleJet® cap without code, up to 600 MHz. Do not use with Ceramic spinners.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.