Centrifuge Tubes, Tubes, Amber
-
-
1.5mL SuperSlik® Polypropylene Microcentrifuge Tubes with Low Protein Binding surface for use with viscous samples. Designed to improve yields. Include flat caps and writing surface. In resealable bags. With flat snap caps, side graduations, and frosted writing surface Ultra low fluid…
-
For medium-sized sample volumes. The 16mm tube is compatible with 15 ml centrifuge rotors. Polypropylene. RNase, DNase, Pyrogen and DNA free. Centrifugation up to 25,000 g. Autoclavable. Temp range +121 °C to -196 °C.
-
Microcentrifuge Tubes in Self-Standing Bags
Globe ScientificGlobe Scientific is pleased to expand on this line of premium quality microcentrifuge tubes with attached snap caps. The polypropylene (PP) tubes are resistant to most chemical reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements.…
-
0.5, 1.5 or 2.0 mL capacities Clear or amber Conical bottoms or freestanding Conical microcentrifuge tubes are made from a crystal clear resin that allows users to easily view samples. Polypropylene tubes are suitable for vapor phase liquid nitrogen storage, boiling and…
-
Racked Centrifuge Tubes
United Scientific SuppliesCentrifuge Tube and Rack sets are a convenient solution for organizing and storing Conical Bottom tubes. Racks are made of expanded polystyrene (EPS) and include holes arranged in a zigzag format for easy dispensing. Racks contain 50 of the 15ml tubes or 25 of the 50ml tubes. Sterile tubes are…
-
5.0mL ClickLok™ MCT with insert cavity snap cap, designed for processing medium-sized sample volumes. The 16mm tube is compatible with 15mL centrifuge rotors. Polypropylene. RNase, DNase, Pyrogen and DNA free. Centrifugation up to 25,000 g. Autoclavable. Temp range +121°C to -196°C.
-
For amber microtubes C18001-A,C19043-A,C19053-A Protect light sensitive samples These amber tubes are not sterile, but they are autoclavable. Certified to be free of RNase/DNase, PCR inhibitor, Human DNA, and pyrogens
-
O-ring seal, safe from -80° to +130°C Suitable for vapor phase LN2 Available in light blocking amber Etched marking area on tube and cap Polypropylene These tubes are NOT DNase/RNase/pyrogen free Tubes themselves are autoclavable; caps without o-rings are…
-
G-Tube Microcentrifuge Tube
Bio PlasNo special locking cap devices needed Over 30,000 x g without cap locks Available in 0.6 mL, 1.5 mL and 2.0 mL Safe sample deposit All three volumes available in siliconized polypropylene The cap of the G-Tube is designed so no special locking device is needed. The cap…
-
Screw-Cap Microcentrifuge Tubes
Bio PlasScrew-Cap Microcentrifuge Tubes The Screw-Cap tube is ideal for any sample-processing or storage application imaginable-and especially for working with valuable or hazardous cells and materials. The extraordinary strength, safety and reliability of the Screw-Cap tube lets you perform…
-
Bio Plas Microcentrifuge Tube
Bio PlasThese microcentrifuge tubes feature a flat top cap which provides a positive and secure seal when closed, thus providing maximum protection for contents. Fabricated with virgin polypropylene for excellent chemical resistant qualities and good clarity. These tubes have high impact strength and will…
-
Eppendorf Safe-Lock Tubes are the result of 50 years of continuous improvement and development. The original Safe-Lock tubes protect your sample with excellent centrifugation stability, feature perfect sealing properties, and reliably prevent sample evaporation. Trust in the original Eppendorf…
-
5mL SuperClear® snap cap centrifuge tubes are an efficient alternative to 15mL tubes. Designed to fit the same rotors as our 15mL centrifuge tubes, you can use these tubes in procedures that require smaller sample volumes. The interior surfaces are ultra-smooth with low retention…
-
Flex Tubes® Microcentrifuge Tubes
EppendorfThe easy–open, easy–close design of the Flex Tubes® provides convenient, ergonomic, and reliable one-handed operation. Whether sample preparation, centrifugation or storage – the Flex Tubes® fit perfectly into your workflows! The easy-to-open, securely closing, Flex…
-
-
Axygen® 2.0mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…
-
5.0mL ClickLok™ MCT with snap cap, designed for processing medium-sized sample volumes. The 16mm tube is compatible with 15mL centrifuge rotors. Polypropylene. RNase, DNase, Pyrogen and DNA free. Centrifugation up to 25,000 g. Autoclavable. Temp range +121°C to -196°C.
-
Microcentrifuge Tubes
United Scientific SuppliesMade from high-quality virgin polypropylene, these microcentrifuge tubes are RNase, DNase, and Pyrogen free for safer use in molecular biology and other biochemical applications. Include a connected snap cap, large molded-in graduations, and a frosted surface for easier writing. Autoclavable tubes…
-
2.0mL SuperClear® Polypropylene snap cap microcentrifuge tubes with graduations. Tubes have frosted side labeling surface and a thin membrane cap that can be pierced easily by a syringe. Resealable bag. Spins to 20,000 RCF. Autoclavable. (122°C) With flat attached snap caps, side…
-
Centrifuge Tubes
United Scientific SuppliesPolypropylene tubes include blue HDPE leak-proof screw caps. The tubes and caps feature specially-designed flat threads for vacuum-type closure that is leak-free at a press of >700mm Hg. Highly smooth hydrophobic internal surfaces minimize wall effect. Silk-screen graduations and a frosted…
-
SuperSpin™ tubes feature an extra-thick and durable wall that can withstand centrifugation to 40,000 x G. The ultra-clear polypropylene resin gives you a clear view of the pellet as well as correct color rendition. Designed with ergonomic caps and smooth surfaces that make this tube easy to…
-
Premium quality, 1.5 mL tubes Leak tested to 20,000 RCF Attached lid Uniform lid membrane thickness Frosted writing area Attached lids provide a tight leakproof seal, can be easily opened and allow trouble-free piercing. Tubes are leak tested to 20,000 RCF for 20 minutes…
-
Snap Cap Microcentrifuge Tubes
Globe ScientificThe Globe Scientific snap cap microcentrifuge tube is made of polypropylene material which offers durability and good chemical resistance. It is used in scientific laboratories to store small volume of chemical samples and reagents.
-
5mL Snap Cap MACROcentrifuge Tubes
Globe ScientificAn efficient and economic alternative to 15mL conical tubes when working with sample volumes between 2.0mL and 5.0mL. With the same diameter and conical shape as a 15mL tube, the shorter 5.0mL macrocentrifuge tubes: Reduce total cost to the lab for purchase and use Reduce…