Low Binding Tubes

Compare Tool

Select up to 3 products

Low Binding Tubes
1 - 32 of 128
Sort
View
Show
  • Cryobank And Bank-It Vials

    Thermo Scientific Nunc

    … CryoTubes have a low binding surface for high sample recovery with low concentration samples. Cryobank vials are for cells and proteins. Bank-It vials are for DNA samples. Working volumes are 0.5 or 1.0 mL. Tubes are for use in the vapor phase of liquid nitrogen and 169 tubes can be stored in a…

  • Vivaspin Turbo 15

    Sartorius

    low protein binding; and Cellulose Triacetate (CtA) with high hydrophilicity and very low non specific binding. Vivaspin TURBO 15: The fastest ultrafiltration device in the market! Sample concentration from 2 to 15 ml in swing bucket or fixed angle rotors accepting 50 ml centrifuge tubes. Twin…

  • …loss is essential for low protein concentrations to enable further analysis. Minimal protein/DNA binding = maximum recovery rate = minimal protein/DNA loss Low DNA binding tubes: centrifugation to 30,000 x g* (2 ml to 25,000 x g*) Low protein binding tubes: centrifugation to 20,000…

  • Vivaspin 6

    Sartorius

    …membrane (HY) for extremely low protein binding; and Cellulose Triacetate (CtA) with high hydrophilicity and very low non specific binding. Vivaspin 6: Sample concentration from 2 to 6 ml in swing bucket or fixed angle rotors accepting 15 ml centrifuge tubes. Twin vertical membranes for…

  • tubes: Sizes include 0.65mL, 1.5mL, and 2.0mL Graduation marks for convenient reference and verification Snapcap which clicks closed to ensure a non-leaking seal. The Cap can be partially closed to make constant opening and closing with your thumb easy and secure. Available in low

  • …Polypropylene Microcentrifuge Tubes with Low Protein Binding surface for use with viscous samples. Designed to improve yields. Include flat caps and writing surface. In resealable bags. With flat snap caps, side graduations, and frosted writing surface Ultra low fluid retention ATP,…

  • CryoELITE™ Cryogenic Storage Vials

    DWK Life Sciences (Wheaton)

    …unique identifier for traceability Bottom format allows unrestricted view of 2D bar code for convenient automated scanning Made from low binding, cryogenic grade virgin polypropylene Lot certified RNase/DNase and Endotoxin Free providing assurance of product integrity Conical well…

  • …dry bath block heaters, tube racks and thermal shakers/vortexers. The 16mm tube diameter is identical to the diameter of standard 15ml tubes, which nsures further compatibility with centrifuge rotors, etc. In many applications, these tubes have replaced 15ml tubes, dramatically reducing plastic…

  • 0.5mL SuperSlik® Polypropylene Microcentrifuge Tubes with Low Protein Binding surface. Include flat caps and writing surface. In resealable bags With flat snap caps, side graduations, and frosted writing surface Ultra low fluid retention ATP, RNase/DNase and Endotoxin Free…

  • Posi-Click™ Low-Binding Microcentrifuge Tubes

    labForce (a Thomas Scientific Brand)

    Low-Binding Posi-Click™ Graduated Microcentrifuge tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Proprietary low-binding or low retention resin maximizes sample recovery Boilproof Fits all standard 0.5,…

  • Biotube System

    Simport

    …as low as -80°C Holds tubes in an 8 x 12 format Ideal for all PCR applications: EIA, RIA, cell harvesting, etc. All components are made of the highest quality polypropylene to assure low protein binding. Rack cover has an alphanumeric numbering system for identifying each tube and…

  • …U.S. Pharmacopoeia (USP) toxicity tests. Low protein binding: Corning engineers and scientists are continually searching for materials and processes that minimize labware-induced interference, such as protein binding. Quality packaging: Falcon tubes, in addition to offering bioanalytical-grade…

  • …odorless, non-cytotoxic and non-hemolytic Contains no phthalate plasticizers or peroxides that can leach out into transported fluid Low binding suface to minimize absorption of proteins and food products Autoclavable; also can be sterilized by gamma radiation, EtO and chemical procedures…

  • Vivaspin 2

    Sartorius

    …membrane (HY) for extremely low protein binding; and Cellulose Triacetate (CtA) with high hydrophilicity and very low non specific binding. Vivaspin 2: Sample concentration from 400 µl to 2ml in swing bucket or fixed angle rotors accepting 15 ml centrifuge tubes. Available in PES, CtA, and…

  • …adsorption of DNA/RNA. The columns can be used following the "bind-wash-elute" procedure, DNA/RNA binding under high chaotropic salt conditions and elution under low salt conditions. High yield and quality . The capacity of a single column is up to 20 µg, the…

  • These Costar® low binding microcentrifuge tubes feature a bonded polymer technology that reduces protein and nucleic acid binding, resulting in better sample recovery. They are made of natural (uncolored) polypropylene and are certified RNase-/DNase-free. -Supplied nonsterile and are…

  • Micro Centrifuge tubes are manufactured using high purity virgin Polypropylene (PP) conforming to US FDA 21 CFR free from natural rubbers and heavy metals. Advanced superhydrophobic material conforming retention level 10 time lesser and reduces protein and nucleic acid binding, resulting in a better…

  • …need low profile tubes. In terms of evaporation, loss of PCR volume is less than 3%. These tubes are highly transparent, thus, making them ideal for applications where the optical qPCR signal is obtained through the bottom of the tube. Capp 0.1 mL tubes can be ordered as individual tubes with caps…

  • … Material: low binding virgin polypropylene Polished tubes for excellent transparency With internal thread for screw caps Tubes laser-labelled with…

  • … Material: low binding virgin polypropylene Polished tubes for excellent transparency With internal thread for screw caps Tubes laser-labelled with…

  • Liquid Phase Immunoassay Tubes

    Thermo Scientific Nunc

    MiniSorp surface Molded from special polyethylene formulation For liquid phase immunoasssays, including RIA, for storing of reagents, or collecting chromatographic fractions Mini-Sorp™ is a polyethylene-based material that provides a low-binding surface.

  • These Costar® 1.7mL low binding microcentrifuge tubes feature a bonded polymer technology that reduces protein and nucleic acid binding, resulting in better sample recovery. They are made of natural (uncolored) polypropylene and are certified RNase-/DNase-free. -Supplied nonsterile and are…

  • Vivaspin 15

    Sartorius

    …membrane (HY) for extremely low protein binding; and Cellulose Triacetate (CtA) with high hydrophilicity and very low non specific binding. Vivaspin 15: Sample concentration from 2 to 15 ml in swing bucket or fixed angle rotors accepting 50 ml centrifuge tubes. Recoveries in excess of 95%.…

  • Vivaspin 500

    Sartorius

    …modified regenerated cellulose membrane (HY) for extremely low protein binding; and Cellulose Triacetate (CtA) with high hydrophilicity and very low non specific binding. Vivaspin 500: Sample concentration from 100 to 500 µl in fixed angle rotors accepting 2.2 ml centrifuge tubes.

  • Low adhesion surface minimizes liquid retention RNase, DNase, enzyme free No surface lubricants to contaminate samples Autoclavable Denville SlipTech™ disposables are injection molded with scientifically blended resins to minimize liquid retention and ensure optimum…

  • …the thread. The high screw cap is a big plus for manual handling. Material: low binding virgin polypropylene Polished tubes for excellent transparency With internal thread for screw caps Tubes laser-labelled with data matrix code (2D), easily legible thanks to excellent contrast…

  • …the thread. The high screw cap is a big plus for manual handling. Material: low binding virgin polypropylene Polished tubes for excellent transparency With internal thread for screw caps Tubes laser-labelled with data matrix code (2D), easily legible thanks to excellent contrast…

  • Vivaspin 20

    Sartorius

    …membrane (HY) for extremely low protein binding; and Cellulose Triacetate (CtA) with high hydrophilicity and very low non specific binding. Vivaspin 20: Sample concentration from 2 to 20 ml in swing bucket or fixed angle rotors accepting 50 ml centrifuge tubes. Twin vertical membranes for…

  • …(PES) membrane for high flow and low binding Two membrane pore sizes: 0.22 or 0.45μm Centrifuge Tube Filter systems include tube filter, centrifuge tube and cap Eliminate a sample transfer step by filtering directly into a 50mL tube Centrifuge Tube Filter Systems are packaged sterile…

  • Autofil® Centrifuge Tube Stand

    Foxx Life Sciences

    Foxx Life Sciences' Centrifuge Tube Stands are intended for use with centrifuge tubes. They are made from Class VI, FDA Grade, BPA-Free Polystyrene, and are conveniently sold in packs of 5. Autofil tube stand can hold one 15ml or 50ml tube Can also be used with the Autofil Centrifuge…

  • …the thread. The high screw cap is a big plus for manual handling. Material: low binding virgin polypropylene Polished tubes for excellent transparency With internal thread for screw caps Tubes laser-labelled with data matrix code (2D), easily legible thanks to excellent contrast…

  • … Material: low binding virgin polypropylene Polished tubes for excellent transparency With internal thread for screw caps Tubes laser-labelled with…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.