Microcentrifuge Tubes 1.5ml

Compare Tool

Select up to 3 products

Microcentrifuge Tubes 1.5ml
1 - 32 of 100
Sort
View
Show
  • Rack Microcentrifuge Tube 1.5mL 96 Pos

    Labconco

    Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 96 each 1.5 ml microcentrifuge tubes, 10.5 mm in diameter

  • Rack Microcentrifuge Tube 1.5mL 18 Pos

    Labconco

    Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 18 each 1.5 ml microcentrifuge tubes, 10.5 mm in diameter Overall…

  • 1.5mL SuperSpin® Microcentrifuge Tubes

    Labcon

    …this tube easy to open and reduces the potential for repetitive strain injury. The cap also includes a special 90° hinge that self-aligns the cap and makes it easier to close while one-handed pipetting. Available in 1.5mL sizes that fit all standard and high capacity rotors. Tubes have flat,…

  • 1.5mL Snap Cap Microcentrifuge Tubes

    Stockwell Scientific

    Max. Force (RCF): 18,000 Brittleness Temp.: 0°C Max. Temp.: 135°C Material: PP Max. Volume: 1.75mL Note: Polypropylene is not recommended for use with Phenol Chloroform. Low temperature storage, multiple spin cycles or organic solvents can affect maximum…

  • Posi-Click™ Low-Binding Microcentrifuge Tubes

    labForce (a Thomas Scientific Brand)

    Low-Binding Posi-Click™ Graduated Microcentrifuge tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Proprietary low-binding or low retention resin maximizes sample recovery Boilproof Fits all standard 0.5,…

  • 1.5mL MaxyClear Snaplock Microcentrifuge Tubes

    Axygen®

    Axygen® 1.5mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…

  • Posi-Click™ Microcentrifuge Tubes Without Caps

    labForce (a Thomas Scientific Brand)

    Posi-Click™ capless tubes are ideal for customers not needing to seal their samples.  With no cap to interfere, collecting from spin columns is easy and mess-free with no caps to break off during centrifugation. Graduated every 100µL for easy volume identification Ultra-clear…

  • Posi-Click™ 1.5 mL Microcentrifuge Tubes

    labForce (a Thomas Scientific Brand)

    1.7mL Posi-Click™ Graduated Microcentrifuge tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 1.5mL centrifuge rotors, racks, and storage boxes Graduated every 100µL for…

  • 1.5mL Graduated Microcentrifuge Tubes with Large Caps

    Crystal-clear polymer facilitates visualization of samples Rated to 20,000 x G Graduations at every 100 μL for easy volume estimation Temperature range: -80°C to +121°C Certified free of detectable RNase, DNase, DNA, PCR inhibitors, and tested pyrogen-free Sterile product…

  • Posi-Click™ 1.7 mL Microcentrifuge Tubes

    labForce (a Thomas Scientific Brand)

    …Graduated Microcentrifuge tubes feature a large easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Frosted Large Cap and writing panel allows for an extra writing room and is resistant to smearing. Boilproof Fits all standard 1.5mL

  • Conical 1.5mL, Screw Cap Microcentrifuge Tube

    Bio Plas

  • Microcentrifuge Tubes without Caps

    Globe Scientific

    These polypropylene (PP) microcentrifuge tubes without cap are resistant to most chemical reagents and can be autoclaved at 130°C. The tubes are offered in 1.5mL and 2mL sizes.

  • 1.5mL SuperClear® Microcentrifuge Tubes with Extra Large Attached Caps

    Labcon

    SuperClear® Polypropylene snap cap microcentrifuge tubes with extra-large top, writing spot, and graduations. Spins to 20,000 RCF. Autoclavable. (122°C) With flat easy open attached extra large snap caps, side graduations, and frosted writing surface ATP, RNase/DNase and Endotoxin…

  • Denville 300D Digital Microcentrifuge w/24 tube angle rotor, 13,300 rpm max.

    Denville

    … The 300D is supplied with s 24 place angle easy access rotor that can accommodate tube sizes of 1.5ml and 2.0ml microcentrifuge tubes. Additional adapters are available for 0.5ml, 0.4ml, and 0.2ml tubes. The rotor is equipped with a cover that easily "snaps" on and off. The 300D is…

  • 1.7 mL Easy-Click Graduated Microcentrifuge Tubes, Small Cap, Clear

    labForce (a Thomas Scientific Brand)

    1.7mL Easy-Click Graduated Microcentrifuge tubes feature a small, easy-to-open cap. Graduated every 100µL for easy volume identification Small cap allows tubes to be spaced closely together in racks and storage boxes Frosted Cap and writing panel allows for an extra writing room and is…

  • Microcentrifuge Tubes with Snap Caps

    Globe Scientific

    These polyropylene microcentrifuge tubes feature attached leak-resistant flat snap caps. Each tube is molded with precise graduation marks for accurate measurements.  Mfr. No. 111562 & 111572 These 1.5mL and 2mL microcentrifuge tubes are lot certified to be RNase free, DNase free,…

  • 1.5mL SuperSlik® Low Retention Microcentrifuge Tubes with Attached Caps

    Labcon

    1.5mL SuperSlik® Polypropylene Microcentrifuge Tubes with Low Protein Binding surface for use with viscous samples. Designed to improve yields. Include flat caps and writing surface. In resealable bags. With flat snap caps, side graduations, and frosted writing surface Ultra low fluid…

  • Siliconized 1.5mL G-Tube, Flat Top Microcentrifuge Tube, Sterile

    Bio Plas

    … Inscribing Patches: All flat top tubes have a textured writing surface on top of the caps. The 1.5ml and 2.0 mL tubes have an additional textured writing surface on the side of the tubes Graduation: The 1.5ml tube is graduated from 0.1 to 1.5ml. The 2.0ml tube is graduated from 0.1 to 2.0ml …

  • Microcentrifuge Tubes in Self-Standing Bags

    Globe Scientific

    Globe Scientific is pleased to expand on this line of premium quality microcentrifuge tubes with attached snap caps. The polypropylene (PP) tubes are resistant to most chemical reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements.…

  • Original Microcentrifuge Tubes, Sterile Microtubes (Individually wrapped),…

    Withstand 17,000 x g Made of polypropylene RNase/DNase free Our original micro tubes were introduced in 1978. Two decades later, thousands of laboratories are still using them, thanks to their broad selection and reputation for reliability. Although we have subsequently introduced…

  • Microcentrifuge Tubes

    Celltreat Scientific

    …Centrifuge tubes have a maximum (RCF) of 16,000g and are packaged in easy opening plastic bags. Conical bottom available in three sizes: 0.5, 1.5 and 2.0mL Self-standing available in 2.0mL Also available in a 1.5mL opaque black tube to protect light sensitive compounds All tubes

  • Microcentrifuge Tubes

    Biotix

    Biotix microcentrifuge tubes are manufactured with medical grade virgin polypropylene for superior clarity. These snapcap tubes are leak resistant, boil proof, and able to withstand 20000 RCF. Try our Microcentrifuge tubes: Sizes include 0.65mL, 1.5mL, and 2.0mL Graduation marks for…

  • Incublock™ Microtube Incubators, PopStopper Plate with attachment rod, fits…

    Denville

    …exhibit unsurpassed temperature uniformity. Thermal transfer to sample tubes is improved, because the aluminum blocks have cavities that are precision machined to match the conical shape of 1.5ml and 0.5ml microcentrifuge tubes. Available in a single or double block version, each unit is supplied…

  • Racks for Microcentrifuge Tubes

    United Scientific Supplies

    Polycarbonate racks hold 1.5ml microcentrifuge tubes. Unique design allows racks to be securely stacked on top of each other. Includes alpha-numeric grid for easy identification of tubes. Autoclavable.

  • Microtube Storage Boxes - 81 x 1.5ml, Black with black lid, Qty: 10

    Denville

    …in all standard 5.25 inch freezer racks Alpha-numerically indexed - right on the box itself Frosted marking panel on 2 sides These new boxes are designed to hold 81 cryogenic vials (1.2 to 2.0ml) or microcentrifuge tubes (1.5 to 2.0ml). 5.13 x 5.13 x 2 inch. For temps to -90°C.

  • Microtube Storage Boxes - 81 x 1.5ml, Orange with natural lid, Qty: 10

    Denville

    …vials (1.2 to 2.0ml) or microcentrifuge tubes (1.5 to 2.0ml). Translucent lid provides a clear view of the A-I and 1-9 index that is permanently printed on each of the box's individual cavities. You don't need the lid on or a separate grid to identify your tubes. 5.13 x 5.13 x 2 inch. For…

  • Microtube Storage Boxes - 81 x 1.5ml, Blue with natural lid, Qty: 10

    Denville

    …vials (1.2 to 2.0ml) or microcentrifuge tubes (1.5 to 2.0ml). Translucent lid provides a clear view of the A-I and 1-9 index that is permanently printed on each of the box's individual cavities. You don't need the lid on or a separate grid to identify your tubes. 5.13 x 5.13 x 2 inch. For…

  • titeSeal™ Microcentrifuge Tubes

    ACTGene, Inc.

    1.5ml and 2.0ml microcentrifuge tubes are easy to open with leak-proof tight seal cap. Withstand 21,000xg. Clear and clarify for easy viewing and graduation with writing area. Certified for DNase, Rnase, DNA, PCR inhibitor, and pyrogen free. Available in sterile and non-sterile choices. …

  • Microtube Storage Boxes - 81 x 1.5ml, Yellow with natural lid, Qty: 10

    Denville

    …vials (1.2 to 2.0ml) or microcentrifuge tubes (1.5 to 2.0ml). Translucent lid provides a clear view of the A-I and 1-9 index that is permanently printed on each of the box's individual cavities. You don't need the lid on or a separate grid to identify your tubes. 5.13 x 5.13 x 2 inch. For…

  • Microtube Storage Boxes - 81 x 1.5ml, Green with natural lid, Qty: 10

    Denville

    …vials (1.2 to 2.0ml) or microcentrifuge tubes (1.5 to 2.0ml). Translucent lid provides a clear view of the A-I and 1-9 index that is permanently printed on each of the box's individual cavities. You don't need the lid on or a separate grid to identify your tubes. 5.13 x 5.13 x 2 inch. For…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.