SP Bel-Art Test Tube Racks
-
Poxygrid® 50mL Centrifuge Tube Racks
SP Bel-Art50mL Multiple Tube Holders Made of epoxy-coated steel wire, these racks hold up to thirty-six 50mL centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223°C…
-
Scienceware® Floating Centrifuge Tube Racks
SP Bel-ArtAllows Superior Temperature Control of Samples Open style floating rack provides tubes with maximum contact with the water and better circulation of the water bath around the tubes, allowing superior temperature control of samples. Work on the benchtop, float in the water bath …
-
Spectro Cell Rack
SP Bel-ArtWells hold standard cells with a 12.5mm cross-section; however, some plastic cells may not fit. Steam autoclavable at 121º C (250º F). Overall dimensions 209 x 70 x 35mm (8 1/4" x 2 3/4" x 1 3/8 "). Polypropylene rack holds twenty 10mm lightpath Spectrophotometer cells in numbered wells The…
-
Scienceware® Hydrometer Racks
SP Bel-ArtPolypropylene racks Top and middle plates have 25 mm diameter holes; bottom plate has wells tapering from 25 to 9 mm to hold hydrometer bulb Overall height is 251 mm Steam autoclavable at 121°C 6040A10 has top plate of 143 mm high for short hydrometers
-
Scienceware® No-Wire™ Test Tube Half Racks
SP Bel-ArtCompact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods. Available in 5 grid sizes to accommodate the full range of laboratory test tubes Steam autoclavable at 121°C (250°F) Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")
-
Poxygrid® Hybridization Bottle Racks
SP Bel-ArtProtects and Stores Hybridizing Bottles Heavy-duty rack protects your expensive bottles keeping them from rolling, tipping and striking against one another. Holds 150mm and 300mm long bottles with ample space in between to allow for the screw cap diameter and provide convenient handling. …
-
Made especially for use with beakers and waterbaths, these space-saving racks are ideal for small quantities of tubes and perfect for use in microbiology and immunology labs. They are molded of buoyant TPX® brand polymethylpentene with tiny bubbles throughout for additional buoyancy. Insert…
-
Microcentrifuge Floating Racks
SP Bel-ArtCompact and Economical Incubate up to twenty-four 1.5ml microcentrifuge tubes in a water bath. Easy to load Microtubes are held snugly and then released when the rack is pressed down on a benchtop Dimensions: 11.9 x 7.8cm (4-11/16 x 3-1/16")
-
Lab-Aire® II Glove Holder
SP Bel-ArtRealize faster drying time by placing wet laboratory gloves on the convenient Lab-Aire® II Glove Holder. Keeps gloves open for external as well as internal drying Helps to extend glove life by maintaining their shape, preventing bending, cracking and moisture buildup Significantly…
-
Scienceware® Rack Slanter
SP Bel-ArtTilt your test tube rack to 25°, 35° or 45° to reduce hand strain when working with pipettors. Also ideal for creating agar slant tubes or use with the Mini-Magnifier to aid in the viewing of Petri dishes. Base legs have predetermined slots that stand slides in and out of to…
-
Scienceware® 3mm NMR Sample Tube Rack
SP Bel-ArtSturdy, stable polypropylene rack is made specifically for organizing and protecting 3mm O.D. thin-walled Nuclear Magnetic Resonance tubes. Holds up to 72 tubes in a 6 x 12 array. Hemispherical wells in the lower deck cradle tubes Sturdy, stable polypropylene construction Handles at…
-
Scienceware® Round Bottom Flask Support
SP Bel-ArtRound-bottom flasks of any size up to 10 liters are cradled securely in the stepped concentric rings of this holder. Can be stacked together for convenient storage Polypropylene plastic rack; not affected by spilled acids, alkalis or other corrosive liquids Steam autoclavable at…
-
Adjustable Microplate Tilting Stand
SP Bel-ArtMinimize Pipetting Errors Make precise additions of liquid components to microplate wells by adjusting plates to the most convenient angle. The angular presentation of the plate and clear acrylic platform beneath allows you to easily judge which wells have received liquid addition by…
-
24-Hole Scintillation Vial Rack Takes 24 vials up to 30 mm o.d. Autoclavable; non-scratching Molded cutouts in end panels form handles For start to finish preparation Height to top of upper shelf: 44 mm. Overall dimensions: 298 x 127 x 95 mm high. Height to top of upper shelf is 1-3/4".
-
Dry It - No Matter How Much Space You Have Small, compact footprint enables placement where it is needed most Dries labware quickly by providing continous warm air circulation High storage capacity to accommodate up to 76 peg positions for all types of labware Selector knob allows…
-
Dry it - No Matter How Much Space You Have High storage capacity to accommodate up to 114 peg positions for all types of labware Single-sided benchtop models fit against a wall, conserving bench space Double-sided benchtop models provide twice the capacity with a slightly larger…
-
Safely transport, incubate and store Petri dishes and contact plates, and helps to streamline benchtop sample processing. Configured in 6 columns with bottom access slots for easy removal of plates Center divider with built-in handle has ample space for labeling Up to four racks can…
-
Scienceware® Floating Cryotube Rack
SP Bel-ArtPolypropylene Autoclavable 20 places Rack accepts 12mm tubes Rack can be used for holding cryotubes during work or incubation. It floats in water and can be used for quickly thawing frozen cells in a water bath. Rack has handle for easy handling. The filled rack unloads easily by…
-
Scienceware® No-Wire™ Test Tube Racks
SP Bel-ArtGreat alternative to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions…
-
Conical Tube Holder
SP Bel-ArtMove tube and rack with one hand, insert or remove tube from the holder with one hand. Support either a 15 or 50mL conical tube while allowing a view of the tube’s entire contents. Steam autoclavable at 121°C (250°F). Chemical-resistant polypropylene.
-
Unique tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Patent pending. Immobilizing tabs prevent tube tops from popping open during boiling Holds up to twelve…
-
No-Wire™ Micro Tube Racks
SP Bel-ArtSteam autoclavable at 121°C (250°F) Dimensions: 128mm x 105mm x 43mm H (5.08" x 4.15" x 1.70") Available in 2 sizes to hold either 0.5 or 1.5ml tubes. Open sides, ideal for use in a tray of crushed ice. Easy to assemble. 1226C36: holds tubes: 0.5 mL micro, places: 63, rows: 7 x…
-
Three Styles to Suit Your Needs Choose from 3 styles of epoxy-coated aluminum rack to hold Gilson Pipetman® pipettors. Provides storage and easy access for up to 10 pipettors plus up to two Pipet-Aid® pipettes 0211J40 (H18962-0001) for desktop storage 1226D30 …
-
Scienceware® 50mL Tube Holders
SP Bel-ArtPolystyrene construction. Leave both hands free for pipetting and other critical tasks Non-Grip Style safely supports a 50ml conical centrifuge tube and permits the tube to freely be removed Grip Style gently grips the tube and moves with the tube when it is lifted from the bench top
-
Unique tabs keep tubes in place and caps closed to protect your samples from loss and contamination. Patent pending Prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Fits most 1000ml beakers …
-
Scienceware® Thermometer Rack
SP Bel-ArtPolypropylene thermometer rack holds up to 25 thermometers in a vertical position Hole diameters in top and middle plates are 7.9 mm ( 5/16") Bottom plate has 3.2 mm ( 1/8”) diameter drain holes. Overall dimensions: 149 x 213 x 251 mm (5 7/8 x 8 3/8 x 9 7/8”)
-
Round Microcentrifuge Floating Racks
SP Bel-ArtPerfectly Sized for Beakers Molded of steam autoclavable polypropylene, these racks fit 400ml or 1000ml beakers. Choose from 8 or 20 place racks with 10.8mm holes for 1.5ml microtubes. Tubes remain completely immersed in a beaker while tops rest above the rack Unload by lightly…
-
Scienceware® Separatory Funnel Rack
SP Bel-ArtThe Scienceware® Separatory Funnel Rack allows the use of a variety of funnel sizes for a different experiments. With adjustable diameter funnel slots, this rack accepts funnel sizes from 100cc to 1000cc. In addition, the two support tiers can be independently adjusted to any height on long…
-
Scienceware® Radioimmunoassay Tube Racks
SP Bel-ArtOrganize over 100 samples in one rack Polyethylene racks provide practical methods of pipetting and storing a large number of samples Using alternate rows and rotating tubes makes it easy to keep track of the last tube filled Can be used in clinical labs for storage of samples Steam…
-
Scienceware® Poxygrid® B.O.D. Bottle Rack
SP Bel-ArtThese racks have 12 places (3 x 4 rows) for 300mL Biological Oxygen Demand Bottles. Stackable for storage or refrigeration allowing 16.7cm (6-9/16") between racks Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)