Clamps/Supports, United Scientific Supplies, Nucleic Acid Sample Preparation
-
Support Stands with Rods
United Scientific SuppliesThese support stands with rods come complete with a stamped steel base with black enamel finish and a removeable zinc plated steel rod.
-
Lattice Lab System Components
United Scientific SuppliesComponents from Lattice Lab Sets are available individually so sets can be expanded to accommodate customized needs.
-
Test Tube Clamps
United Scientific SuppliesTest tube clamp for all sizes of test tubes. Available with and without finger grips in both Brass Wire and Steel wire with a brass finish. Note: Wooden test tube holder can accommodate test tubes from 12mm to 25mm in diameter.
-
Buret Clamps
United Scientific SuppliesClamps are die casted from aluminum and feature black rubber sleeves for firm gripping of burettes. The adjustable clamps hold up to 30mm OD burettes which are held in place by the pressure created by the springs. For use with rods up to 19mm diameter.
-
Tripod Stand
United Scientific SuppliesCast iron ring with black enamel finish. Detachable zinc plated legs. Legs are interchangeable.
-
Cast Iron Support Stands with Rods
United Scientific SuppliesThese support stands feature a heavy cast iron base with black enamel finish. Each base includes a removable zinc plated rod.
-
Lincoln-Type Burette Clamp
United Scientific SuppliesThis sinc plated stamped steel burette clamp has a steel thumbscrew and can be used with rods up to 3/4" in diameter. The distance between the two burettes is 7.25"
-
Porcelain Support Stands with Rods
United Scientific SuppliesHeavy porcelain bases with glazed finish to prevent chemicals from seeping into the base. Base includes rubber feet to ensure the base does not slide or damage bench surface. Hole for rod is located in the center of the base. Includes a removable aluminum support rod. Stainless steel support rod is…
-
Burette Clamp
United Scientific SuppliesThis clamp features plastic coverd spring jaws. Accepts burettes up to 35mm OD, and support rods up to 0.5" OD. Available as a single or double burette clamp.
-
Clamp Holders
United Scientific SuppliesClamp holders for rods up to 19mm (0.75") in diameter. Available in Cast Iron or Brass.
-
Square Platform Laboratory Jack
United Scientific SuppliesLaboratory support jacks are constructed of chemically resistant anodized aluminum and stainless steel. The scissor jack design enables height adjustment with a simple turn of the knob. LBJK44 has a 4" x 4" platform that can be vertically adjusted fro
-
Plastic Burette Clamp
United Scientific SuppliesThese clamps are molded in polypropylene, making them completely corrosion proof. The spring loaded jack in the middle provides a vice-like grip to the burette and prevents in from slipping. Two tapered wedges are provided to ensure firm grip on the rods having diameter 0.5" or3/8".…
-
THERMOMETER CLAMP
United Scientific SuppliesThermometer Clamp features adjustable 360° rotating jaw for suspending thermometers. The clamp attaches to rods up to 13mm (1/2") O.D.
-
Plastic Support Stands
United Scientific SuppliesThese non corrosive molded support stands provide excellent alternatives to metal ones. Even the metallic rod has a polypropylene covering making it non corrosive. Each support base comes with a 0.5" diameter 30" long rod.
-
Test Tube Clamp
United Scientific SuppliesSelf closing brass test tube clamp with finger grips and without finger grips
-
FUNNEL HOLDER, DOUBLE, PP, PK/6
United Scientific SuppliesSuspend two funnels simultaneously using this polypropylene holder. These corrosion-resistant holders can be used with 3" to 6" diameter funnels, and include an extra plate to accommodate 1" to 3" diameter funnels. Two tapered wedges are provided to ensure firm grip on rods measuring 1/2" or 3/8" diameter.
-
DELUXE METALWARE KIT
United Scientific SuppliesThis deluxe set includes a support stand (5” x 8”) with support rod (20”), support ring (3”), a 2-prong extension clamp with cork lined jaws and a clamp holder. The support rod includes a 3” long rod to provide more torque when securing the rod to the base plate.
-
3-Prong Heavy Duty Extension Clamp
United Scientific SuppliesThese extension clamps features heavy-duty electroplated zinc alloy construction, dual prong adjustments and addtional fiberglass sleeves. Clamps have a max temperature use of 80°C. CLHD01 - 4" long extension rod is constructed of stainless steel. Prongs open to about 1.75",…
-
Swivel Clamp
United Scientific SuppliesChrome plated steel double clamp. Accepts rods up to 0.75" (19mm) in diameter. One clamp can be rotated 360° about long axis and clamped in any position.
-
4-Prong Extension Clamp
United Scientific SuppliesFeatures a 4-prong die-cast clamp attached to a chrome-plated steel rod. Jaws are lined with cork. Overall length is 8".
-
Heavy Support Stands with Rods
United Scientific SuppliesThese stamped steel bases feature an added steel plate on the back which makes them about 50% heavier than regular stamped steel bases. The steel plate also facilitates a sturdier threading of the rod into the base.
-
-
Screw Compressor Tubing Clamps
United Scientific SuppliesScrew Compressor Clamps are made fo steel wire and nickel plated. Opens to either 3/4" or 1" and is available as a “closed” or “open” type.
-
Round Bottom Flask Stand
United Scientific SuppliesMolded in Polypropylene, this flask stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point of contact. This flask stand can hold round bottom flasks up to 10,000ml capacity. This stackable flask stand can also be autoclaved.
-
Support Stands with Rod and Rings Sets
United Scientific SuppliesEach set contains a stamped steel base and rod along with 2, 3, 4, or 5 cast iron rings with clamps. Sets are shipped in specially designed boxes.
-
Lattice Lab System, Set #3
United Scientific SuppliesThis Lattice Lab System features an assortment of aluminum rods from 18" to 48" long including 10 rods that are 48" long. Assembly is easy and requres only a screwdriver. Support rods are made of hard aluminum and foot plates and hook connectors are made of cast…
-
Cast Iron Tripod Stands
United Scientific SuppliesCast iron ring with black enamel finish. Detachable zinc plated legs. Legs are interchangeable, features removeable rings with 3.5", 4.75", 6.5" Ring O.D., 9" Height.
-
United Scientific™ Chain Clamp
United Scientific SuppliesThis apparatus is useful for holding objects that are too large for standard clamps, such as glass distillation columns and odd shaped glassware. Chain and support band are made of strong chrome-plated brass, and support rod is constructed of stainless steel. Chain is 21” long and can be adjusted…
-
2 Prong Cork, PVC, and Silicone Lined Buret Clamp
United Scientific SuppliesOur deluxe line of two prong burette clamps are made of pressure die casted zinc alloy and are chrome plated. Adjustable to hold up to 60mm OD burettes, these clamps feature double keyed spring type adjustments. Available with an extension rod 8 ¼" (22cm) long, 5/16" (0.8cm) OD, with an overall…
-
United Scientific™ Flask Stand Silicone
United Scientific SuppliesThis silicone flask stand can support round bottom flasks as large as 2000 mL, as well as other items like beakers and dishes. The stand has 12 molded-in steps to provide a secure grip for a wide range of flasks. The silicone material that is heat resistant to 250° C. Flask stand…
-
Single Burette Clamp
United Scientific SuppliesExcellent for holding small objects, The jaws on these burette clamps open from 15mm to 45mm (0.5" to 1.75"). The clamp attaches to rods up to 13mm (0.5"). O.D. Jaws can be rotated and locked at any angle. Available with the jaws coated or uncoated.
-
Extension Clamps
United Scientific Supplies3 pronged extension clamp is 10" long and has rubber tubing covering the prongs Extention Clamp with cork covered jaws, 8" total length 3 Pronged clamp with aluminum rod, 10" long