Clamp holders for rods up to 19mm (0.75") in diameter. Available in Cast Iron or Brass.

This deluxe set includes a support stand (5” x 8”) with support rod (20”), support ring (3”), a 2-prong extension clamp with cork lined jaws and a clamp holder. The support rod includes a 3” long rod to provide more torque when securing the rod to the base plate.

Hook Collar clamps are ideal for suspending pulleys, balances, etc from support rods or cross members. Available for rods up to 0.5" or 0.75".

Laboratory support jacks are constructed of chemically resistant anodized aluminum and stainless steel. The scissor jack design enables height adjustment with a simple turn of the knob. LBJK44 has a 4" x 4" platform that can be vertically adjusted fro

These extension clamps features heavy-duty electroplated zinc alloy construction, dual prong adjustments and addtional fiberglass sleeves. Clamps have a max temperature use of 80°C. CLHD01 - 4" long extension rod is constructed of stainless steel. Prongs open to about 1.75",…

Thermometer Clamp features adjustable 360° rotating jaw for suspending thermometers. The clamp attaches to rods up to 13mm (1/2") O.D.

Heavy cast iron triangular bases with black enamel finish include a zinc plated steel rod.

This clamp features plastic coverd spring jaws. Accepts burettes up to 35mm OD, and support rods up to 0.5" OD. Available as a single or double burette clamp.

The Lattice Lab System is a lightweight flexible set of support rods and clamps that allows a wide range of lab apparatus to be assembled and securely supported. Assembly is easy and requires only a screwdriver. Support rods are made of hard aluminum and foot plates and hook connectors are made of…

Molded in Polypropylene, this flask stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point of contact. This flask stand can hold round bottom flasks up to 10,000ml capacity. This stackable flask stand can also be autoclaved.

Strong, excellent quality laboratory support jack, made of aluminum and stainless steel. Vertical height to 26cm;15cm x 12cm top and base plates. Also available with removable 20cm x 20cm platform and a 45cm long support rod.

These non corrosive molded support stands provide excellent alternatives to metal ones. Even the metallic rod has a polypropylene covering making it non corrosive. Each support base comes with a 0.5" diameter 30" long rod.

Connect this clamp to any support rod and set up to three separate pendulum demonstrations. Includes individual cord clamps.

Each set contains a stamped steel base and rod along with 2, 3, 4, or 5 cast iron rings with clamps. Sets are shipped in specially designed boxes.

This apparatus is useful for holding objects that are too large for standard clamps, such as glass distillation columns and odd shaped glassware. Chain and support band are made of strong chrome-plated brass, and support rod is constructed of stainless steel. Chain is 21” long and can be adjusted…

Support rings with clamp, cast iron.

This Lattice Lab System features an assortment of aluminum rods from 18" to 48" long.  Assembly is easy and requres only a screwdriver.  Support rods are made of hard aluminum and foot plates and hook connectors are made of cast alloy.  Please note: must be shipped by motor…

This Lattice Lab System features an assortment of aluminum rods from 18" to 48" long including 10 rods that are 48" long.  Assembly is easy and requres only a screwdriver.  Support rods are made of hard aluminum and foot plates and hook connectors are made of cast…

Features a 4-prong die-cast clamp attached to a chrome-plated steel rod. Jaws are lined with cork. Overall length is 8".

Clamp with Hook can be rotated and locked in any position. Ideal for supporting suspended thermometers, drying tubes, etc. The clamp attaches to rods up to 13mm (1/2") O.D.

This line of 3-prong extenstion clamps are constructed of pressure die casted zinc alloy and are chrome plated. Clamps open to about 3", have a recommended maximum grip size of about 2.25", and feature double keyed spring-type adjustment screws. Available with an extension rod 8.25"…

Chrome plated steel double clamp. Accepts rods up to 0.75" (19mm) in diameter. One clamp can be rotated 360° about long axis and clamped in any position.

Clamp features vinyl coated three pronged jaws that open to 2.25" wide. Includes fiberglass sleeves and a clamp holder that can be rotated 360°.

Cast aluminum clamp holder for use with rods up to 19mm in diameter. For use when clamping at 90° is required. This clamp features a min to max grip range of 0-21mm and a v-grove bearing length of 55mm.

These clamps are molded in polypropylene, making them completely corrosion proof. The spring loaded jack in the middle provides a vice-like grip to the burette and prevents in from slipping. Two tapered wedges are provided to ensure firm grip on the rods having diameter 0.5" or3/8".…

Cast iron ring with black enamel finish. Detachable zinc plated legs. Legs are interchangeable, features removeable rings with 3.5", 4.75", 6.5" Ring O.D., 9" Height.

Mohr's Pinchcock tubing Clamp is made of steel wire and nickel plated. Available for tubing diameters of 10mm, 13mm, and 16mm.

Suspend two funnels simultaneously using this polypropylene holder. These corrosion-resistant holders can be used with 3" to 6" diameter funnels, and include an extra plate to accommodate 1" to 3" diameter funnels. Two tapered wedges are provided to ensure firm grip on rods measuring 1/2" or 3/8" diameter.

Made of steel wire, zinc plated. Stand has a heavy wire gauze top. Overall height is 5" to accommodate all sizes of burners. Available with or without a ceramic center on wire gauze top.

This stand is ideal for use with alcohol burners. The base is made from 3/16" stainless steel rod with a plated steel mesh top. The stand can be used in either high (5") or low (4") position.

Support rings with clamp, steel rod.

This Lattice Lab System features an assortment of aluminum rods frup to 72" long.  Assembly is easy and requres only a screwdriver.  Support rods are made of hard aluminum and foot plates and hook connectors are made of cast alloy.  Please note: must be shipped by motor…