Clamps/Supports, Nucleic Acid Sample Preparation, Ready to Ship
-
Laboratory Jack
United Scientific SuppliesStrong, excellent quality laboratory support jack, made of aluminum and stainless steel. Vertical height to 26cm;15cm x 12cm top and base plates. Also available with removable 20cm x 20cm platform and a 45cm long support rod.
-
BIBASE rubber support ring
MilliporeSigmaReversible; can also be stacked upon each other. Three sizes provide six different diameters for round-bottom flasks ranging from 50 to 6,000 mL. Excellent adhesion to glass prevents slippage and also offers thermal and electrical insulation. Available in two rubber types.
-
Platform Jacks
HumboldtThis highly stable jack can be adjusted to any height between 2-1/2" to 10" (64mm to 254mm). The jack will accept loads up to 10 lbs. (45.4 kg). The unit is constructed of aluminum top and bottom plates with a baked-enamel finish and plated steel cross members. Height adjustments are achieved by…
-
Clamp Extension
GSC International, Inc.A cast aluminum clamp with cork lined prongs to hold a flask securely. The jaws open to a maximum of 3". Overall length 9.5".
-
Regular Clamp Holders Stainless steel electro-polished finish or nickel-plated zinc construction. Ideal for holding clamps to lab-frames. Use wherever clamping at 90° is required. Swivel Holders Two rod holders with center swivel capacity allow tilting of clamps at any angle in…
-
Hook Collar Clamps
United Scientific SuppliesHook Collar clamps are ideal for suspending pulleys, balances, etc from support rods or cross members. Available for rods up to 0.5" or 0.75".
-
These economical KECK adapters, clamps, and clips will not scratch glass or corrode—ideal for glass and tubing assembly. All KECK products are color-coded for fast, easy size identification. Use quick disconnect adapters for safe, convenient tubing-to-tubing or tubing-to-glass connections.…
-
Stainless steel electro-polished finish or nickel-plated zinc Large grip adjustment range 2-prong construction Single or dual adjust Designed to securely hold laboratory glassware and apparatus. Extension arm attaches clamp head securely and offers easy positioning in the deepest…
-
Aluminum Lab Frame Lattice Rods
Lee EngineeringL12R-4A : 1/2" X 4" Rod L12R-12A: 1/2" X 12" Rod L12R-24A: 1/2" X 24" Rod L12R-36A: 1/2" X 36" Rod L12R-48A: 1/2" X 48" Rod L12R-72A: 1/2" X 72" Rod L12R-84A: 1/2" X 84" Rod L12R-60A: 1/2" X…
-
Easily attaches top most lab benches Frees up bench space Flexible support arm Support system easily attaches to the side of your lab bench or counter top, which helps utilize more space in your lab. Ultra Flex clamping system is extremely versatile and features a flexible arm that…
-
Universal Clamp with Holder
United Scientific SuppliesClamp features vinyl coated three pronged jaws that open to 2.25" wide. Includes fiberglass sleeves and a clamp holder that can be rotated 360°.
-
Swivel Clamps
OhausUsed to hold apparatus near the lab-frame. Unlike extension clamps, the swivel clamps have an integral holder for attaching to a lab-frame or other apparatus. Built-in holder grips rods up to 19mm (0.75") in diameter and is adjustable for forward or reverse-facing adjustment screws. Shaft…
-
SYNTHWARE Clamp Bosshead
Kemtech AmericaClamp Bosshead, Synthware, For rods up to 15mm diameter, chrome plated finishwith plastic headed screws.
-
stop-it Metal Hose Clamps
BürkleThe materials steel and aluminium ensure that the stop-it metal is extremly heat resistant and sturdy. The hose clip is available in four different sizes, for hose diameters up to max. 30 mm. The hose clip can be used wherever the flow in hoses with liquids or gases needs to be regulated or…
-
Single Burette Clamp
GSC International, Inc.Cast aluminum clamp with nickel plated steel thumb-screw. The clamps jaws have a range of 3/8" x 1-3/8".
-
Wooden Test Tube Clamps
HumboldtThis clamp is constructed from hardwood with a smooth finish and self-closing spring. The clamp will accept tubes up to 3/4" (19mm) in diameter. Overall length is 7" (178mm).
-
Corning offers a stainless steel, two piece, 18" (45.7cm) support rod with a 5/16" (0.8cm) diameter that consists of two 9" rods that screw together. It screws into the base of Corning hot plate and stirrer models PC-400/410/420, PC-400D/410D/420D and PC-600D/610D/620D.
-
Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.
-
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…
-
Stainless Steel Ball & Socket Clamps
Bal SupplyStainless steel Pinch clamps are for use with O-ring and ball and socket clamps All sizes except 1236D18 and 1236D20 have screw locking devices. Only screw locking clamps are recommended for O-ring joints. All clamps are made of 304 –18/8 Stainless Steel.
-
Plastic Joint Clips
Bal SupplyStandard taper keck type joint clips Color coded for easy size identification Will not corrode or scratch glassware Can withstand temperatures up to 302°F (150°C)
-
Cast Iron Support Rings
GSC International, Inc.A cast iron clamp with nickel plated steel set screws. Sold individually. Available in the following sizes: 2" OD 3" OD 4" OD 5" OD 6" OD
-
Table Clamp
HumboldtThe Table Clamp is designed to support meter sticks and other round or square rods, either vertically or horizontally up to 1" (25mm) thick. The Vee's are milled at right angles and the clamp can be mounted on table edges up to 1-3/4" (45mm) thick. Each jaw can be adjusted separately. Heavy cast…
-
Clamp Holders
United Scientific SuppliesClamp holders for rods up to 19mm (0.75") in diameter. Available in Cast Iron or Brass.
-
-
IKA® Mechanical Accessories - Stands
IKA WorksThomas No. 1227W29 Small stand for T 10 basic. Diameter of support rod: 10 mm Dimensions: (W x D) 242 x 355 mm Height: 370 mm Max. load: 0.7 kg Thomas No. 1203D30 With slip resistant foil. Max. load: 5 kg Dimensions: (W x D): 200 x 316 mm Height: 560 mm Thomas No.…
-
Screw Compressor Tubing Clamps
United Scientific SuppliesScrew Compressor Clamps are made fo steel wire and nickel plated. Opens to either 3/4" or 1" and is available as a “closed” or “open” type.
-
Humboldt Test Tube Clamp
HumboldtThe Humboldt Mfg. Co test tube clamp is suitable for use in research facilities and chemical laboratories while conducting experiments. It is made of high quality material which ensures durability and long lasting usage.
-
Lattice Lab System Components
United Scientific SuppliesComponents from Lattice Lab Sets are available individually so sets can be expanded to accommodate customized needs.
-
Thomas Spherical Joint Pinch Clamps
labForce® (powered by Thomas Scientific)For ball-and-socket or O-ring glass joints in universal use for quick, convenient and safe mounting and dismantling of apparatus Strong, linear spring closing action Unique forked-shaped jaws provide uniform compression for safe, leak-free seals Screw-locking device with spring for…
-
Standard Taper Clamps
Bal SupplyThese stainless steel, corrosion resistant clamps use strong spring closed forced jaw designed for securing standard taper joints.
-
Scienceware® Tubing Clamps
SP Bel-ArtScrew Clamp Offers on/off and fine control so accurate it replaces stopcocks in many applications Can be installed without disconnecting tubing Molded of Delrin® plastic Clamp is autoclavable and resistant to acids, alkalis and organic solvents Accepts flexible tubing up to 14mm…