High impact polystyrene loops and needles are smooth and flexible to facilitate uniform and smooth streaking without damaging the gel surface. Needles are straight and suitable for removal of specimens of single colonies. Packed sterile in safe, tamper-proof, zip-seal resealable bags. Disposable…

Vinyl-covered paper tapes, backed with self-sticking, bacteriostatic adhesive Can be marked with pencil, pen or ball-point; helpful for coding of samples, etc. Tape adheres to glass, metals, polyethylene, Teflon®, wax, rubber, paper and cloth Can withstand temperatures from -55° to 120°C …

Reduce contamination risk HydroLogix Tips (HLT) are designed to reduce sample retention. Molded from virgin polypropylene, they don?t use additives or coatings that may affect sample integrity. All sterile HLT tips are certified PURE. The testing protocols used in PURE certification are…

The only bag featuring the a liquid-tight, PRESS AND CLOSE® adhesive closure system. Simply peel away the release liner and press to close     Separate outside pocket for the requisition slip     It’s the ORIGINAL adhesive closure with NO…

Float in small baths as well as large vessels Brightly-colored, high-density polyethylene foam racks are ideal for floating tubes in water baths, tubs, or beakers. Closed-cell foam resists water absorption so racks can be washed and reused. The blue round rack features unique…

Vinyl-covered paper tapes, backed with self-sticking, bacteriostatic adhesive Can be marked with pencil, pen or ball-point; helpful for coding of samples, etc. Tape adheres to glass, metals, polyethylene, Teflon®, wax, rubber, paper and cloth Unaffected by temperatures from -55° to +120°C …

A faster and easier alternative to gauze filtration in procedures involving dissociation of cells from either clumps or primary tissues      Consistently obtain a more uniform single-cell suspension      Three nylon mesh pore sizes for optimal performance in a…

Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and…

MTC Bio’s SureSeal S™ microcentrifuge tubes are designed for a broad range of research applications, including enzyme digests, DNA isolation/purification, centrifugation, incubation and general sample/reagent storage. With a variety of design advances, SureSeal Tubes improve sample…

High-quality and versatile general purpose color tape ideal for a wide range of applications. This self-adhesive impregnated paper tape is water proof, oil proof and acid resistant. It adheres to virtually any clean and dry surface and peels off easily, leaving no residue. It also accepts…

Nev’s Ink, Inc. Brand Labeling Tape is strong, durable, oil resistant, waterproof, and acid resistant. It can withstand temperatures from -23 to +121 degrees Celsius. (-10 to +250 degrees Fahrenheit.) Our Tape can be written on with pen, pencil, or permanent marker. Tape will stick to most…

Available with 7 capacities of 1.0, 2.0, 5.0, 10.0, 25.0 and 50.0ml 1.0, 2.0, 5.0, 10.0ml are stretched, while 10.0, 25.0 and 50.0ml are ultrasonically welded at tip and mouth-piece Graduations are calibrated for accurate dispensing to within ±1% Different color ring for easy…

UltraTape 1110 is designed specifically for sealing wafer shipping boxes as well as cleanroom packaging and bag sealing. Its specially formulated medium-high adhesive leaves no residue or ghosting on plastic boxes, even after prolonged storage. The tap

Easily color code samples for quick identification, customization and to increase productivity Assorted colored cap tubes come with a free reusable plastic rack (Part numbers 229419 & 229429) Graduations are printed in bold easy-to-read black ink and are accurate to ± 2% Large…

Microtube, 0.65mL, YELLOW PK/1000

Octagon magnetic stirring bars with integral pivot ring are the most commonly used shape. Choose from red, yellow or blue. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Interrupted profile provides greater surface area and…

1.7mL Capless SuperClear® Polypropylene Microcentrifuge Tubes without caps. Resealable bags. Not for vortexing. Without caps Includes side graduations, and frosted writing surface ATP, RNase/DNase and Endotoxin Free (non-pyrogenic) Polypropylene USP Class VI resin High…

1112 is similar to the 1110 product. It is for applications where a medium adhesion tape is preferred. The 1112 tape has the same adhesive system (but different ratio of ingredients) as the 1110 tape, and a medium density as opposed to a low density po

Globe Scientific is pleased to expand on this line of premium quality microcentrifuge tubes with attached snap caps. The polypropylene (PP) tubes are resistant to most chemical reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements.…

Dressing Disposal These red-colored, unprinted, high-density bags are ideal for multiple uses and convenience in disposing of discarded wound-care dressings. Liner HDPE The strong bottom star-seal construction of this bag provides a measure of infection control/protection…

Easy-to-grasp tabs for sample handling and storage Flip polypropylene rack from 96 wells for 0.5 mL tubes on one side to 96 wells for 1.5/2.0 mL tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack. 0.5 mL wells are…

"Banana-peel" plastic wrap features easy opening for aseptic removal and eliminates static cling when wearing latex gloves. You can see the polystyrene pipet through the clear plastic wrap for instant size identification. Plus, space saving packaging reduces storage requirements, waste,…

MTC Bio’s 5mL MacroTube™ family takes all of the conveniences of 1.5mL tubes and scales them up for larger volumes and throughput applications.  In many cases, they  replace 15mL tubes, dramatically reducing plastic waste, storage space and shipping costs.  …

Axygen® Screw caps with O-rings. Available in a variety of colors.

Axygen® 2.0mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…

UltraTape's high tack 1153 tape is ideal for any cleanroom construction application that requires a strong bond. This high adhesion, polyethylene tape is residue-free, easy to tear, and can be written on with a pen. It is offered in a variety of colors including our unique Protocol Tape version…

Crystal-clear polymer facilitates visualization of samples Rated to 20,000 x G Graduations at every 100 μL for easy volume estimation Temperature range: -80°C to +121°C Certified free of detectable RNase, DNase, DNA, PCR inhibitors, and tested pyrogen-free Sterile product…

For consistency and reliability in small-volume liquid handling Gel-Loading Tips with Capillary Ends: Available in three different orifice configurations- 0.5 mm round, 0.4 mm flat and 0.2 mm flat- Costar gel-loading tips cover a wide range of applications. Tips are also available in…

No special locking cap devices needed Over 30,000 x g without cap locks Available in 0.6 mL, 1.5 mL and 2.0 mL Safe sample deposit All three volumes available in siliconized polypropylene The cap of the G-Tube is designed so no special locking device is needed. The cap…

Nev’s Ink, Inc. Brand Labeling Tape is strong, durable, oil resistant, waterproof, and acid resistant. It can withstand temperatures from -23 to +121 degrees Celsius. (-10 to +250 degrees Fahrenheit.) Our Tape can be written on with pen, pencil, or permanent marker. Tape will stick to most…

Nev’s Ink, Inc. Brand Labeling Tape is strong, durable, oil resistant, waterproof, and acid resistant. It can withstand temperatures from -23 to +121 degrees Celsius. (-10 to +250 degrees Fahrenheit.) Our Tape can be written on with pen, pencil, or permanent marker. Tape will stick to most…

Tough and more highly resistant to acids, bases, solvents, and heat onerack® durable racks are molded in a single, continuous piece so no assembly required and there are no detachable pieces. Delrin® fiberglass-reinforced polyoxymethylene (POM) Offers the highest…