2ml Microcentrifuge Tube

Crystal-clear polymer facilitates visualization of samples Rated to 20,000 x G Graduations at every 100 μL for easy volume estimation Temperature range: -80°C to +121°C Certified free of detectable RNase, DNase, DNA, PCR inhibitors, and tested pyrogen-free Sterile product…

Natural, Polypropylene Non-Sterile, Bulk Bag, 1,000 Tubes/Bag, 5 Bags/Case Grad Lines: Yes Certified RNase/DNase Free Certified Human DNA Free Certified PCR Inhibitor Free Certified Pyrogen Free

2.0mL SuperClear® Polypropylene snap cap microcentrifuge tubes with graduations. Tubes have frosted side labeling surface and a thin membrane cap that can be pierced easily by a syringe. Resealable bag. Spins to 20,000 RCF. Autoclavable. (122°C) With flat attached snap caps, side…

Axygen® 2.0mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…

Unattached HDPE rim seal caps provide a tight secure seal Polypropylene Self-standing Sterile Withstands a maximum RCF of 20,000 xg

… The 300D is supplied with s 24 place angle easy access rotor that can accommodate tube sizes of 1.5ml and 2.0ml microcentrifuge tubes. Additional adapters are available for 0.5ml, 0.4ml, and 0.2ml tubes. The rotor is equipped with a cover that easily "snaps" on and off. The 300D is…

…Centrifuge tubes have a maximum (RCF) of 16,000g and are packaged in easy opening plastic bags. Conical bottom available in three sizes: 0.5, 1.5 and 2.0mL Self-standing available in 2.0mL Also available in a 1.5mL opaque black tube to protect light sensitive compounds All tubes…

…compatible with both 1.5ml and 2.0ml microcentrifuge tubes. Racks lock together on each side so that several can be attached for larger experiments. Each hole has molded in numbers for sample indentification. Ergonomic design provides easy insertion and removal and of tubes. Include rubber stopper…

Stackable polycarbonate racks are compatible with both 1.5ml and 2.0ml microcentrifuge tubes. Each hole has molded in numbers and letters for sample identification. Ergonomic design provides easy insertion and removal and of tubes. Can be used in wide temperature range (-135 °C to 135 °C).…

1.5ml and 2.0ml microcentrifuge tubes are easy to open with leak-proof tight seal cap. Withstand 21,000xg. Clear and clarify for easy viewing and graduation with writing area. Certified for DNase, Rnase, DNA, PCR inhibitor, and pyrogen free. Available in sterile and non-sterile choices. …

Unique tabs keep tubes in place and caps closed to protect your samples from loss and contamination. Patent pending   Prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Fits most 1000ml beakers …

…contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Patent pending. Immobilizing tabs prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered…

…Graduated Microcentrifuge tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Proprietary low-binding or low retention resin maximizes sample recovery Boilproof Fits all standard 0.5, 1.5, and 2.0mL centrifuge…

From the SureSeal family of sterile tubes you trust comes MTC Bio’s new 2.0mL screw cap microcentrifuge tubes. Made from ultra-clear polypropylene, with crisp printed graduations, SureSeal 2mL screw-cap tubes offer the best visualization of sample on the market today! May be centrifuged at up…

BRAND microcentrifuge tubes fit most common rotors and may be spun up to 30,000 RCF (g) (10,000 x g for 0.5mL; 20,000 x g for 1.5mL; 30,000 x g for 1.5mL and 2.0mL with lid closure at 20°C for 20 min). Manufactured from virgin polypropylene, these highly translucent tubes are free from flash,…

…Tube is made of inert virgin-polypropylene copolymer, to minimize the risk of altering samples Universal use - Accommodates all fixed angle head microcentrifuges (0.5ml and 2.0ml upright models require adapter Cat. No. 4212). Will withstand maximum G-forces of all current microcentrifuge…

2.0mL Posi-Lock™ Graduated Microcentrifuge tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 2.0mL centrifuge rotors, racks, and storage boxes Graduated every 100µL for…

…ml rotor Loaded with features, the Spectrafuge 24D has precise digital microprocessor control and an innovative rotor design. The rotor places tubes on a plateau, where the user can easily grip the tops. A powerful and quiet brushless motor accelerates to a maximum speed of 13,330 rpm/ 16,000 x…

…tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Raised handle for easy lifting without…

Posi-Lock™ capless tubes are ideal for customers not needing to seal their samples.  With no cap to interfere, collecting from spin columns is easy and mess-free with no caps to break off during centrifugation. Graduated every 100µL for easy volume identification Ultra-clear…

…Packed 500 in a bag and 10 bags in a pack. All style of tubes and caps are autoclavable. Tubes can be centrifuged to 20,000 RCF. Available in 0.5mL, 1.5mL, and 2.0ml sizes in both conical and freestanding versions. 2.0ml and 1.5ml Tubes have a side writing surface and graduations on some versions.…

Axygen® 2.0mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…

Reduced noise Single rotor Speeds to 14,000 rpm The centrifuge 5418 is an 18-place microcentrifuge for 1.5/2.0 mL tubes. The 5418 can reach a maximum rcf of 16,873 x g/14,000 rpm. Design allows safe centrifugation of hazardous materials. High speed motors generate g-force…

…Ducting system supplies a continuous flow of ambient air to the rotor chamber to keep the rotor cool and to prevent significant rises in sample temperature. Complete and ready to operate unit includes a 18 x 1.5/2.0 mL rotor. Adapters are available for 500, 450, 250 and 200 µL cycling tubes.

…14,000 rpm and 16,058 xg Swing out rotor options for tubes and plates Indicator Light, easily view cycle status Unique EZ-Scroll™ touch pad The Z287-A exceeds the limitations set forth by traditional microcentrifuges which are restricted solely to fixed angle rotors for…

…Packed 500 in a bag and 10 bags in a pack. All style of tubes and caps are autoclavable. Tubes can be centrifuged to 20,000 RCF. Available in 0.5mL, 1.5mL, and 2.0ml sizes in both conical and freestanding versions. 2.0ml and 1.5ml Tubes have a side writing surface and graduations on some versions.…

These polyropylene microcentrifuge tubes feature attached leak-resistant flat snap caps. Each tube is molded with precise graduation marks for accurate measurements.  Mfr. No. 111562 & 111572 These 1.5mL and 2mL microcentrifuge tubes are lot certified to be RNase free, DNase free,…

…Patches: All flat top tubes have a textured writing surface on top of the caps. The 1.5ml and 2.0 mL tubes have an additional textured writing surface on the side of the tubes Graduation: The 1.5ml tube is graduated from 0.1 to 1.5ml. The 2.0ml tube is graduated from 0.1 to 2.0ml Finish: The…