For ball-and-socket or O-ring glass joints in universal use for quick, convenient and safe mounting and dismantling of apparatus Strong, linear spring closing action Unique forked-shaped jaws provide uniform compression for safe, leak-free seals Screw-locking device with spring for…

Standard taper keck type joint clips Color coded for easy size identification Will not corrode or scratch glassware Can withstand temperatures up to 302°F (150°C)

The Humboldt Mfg. Co test tube clamp is suitable for use in research facilities and chemical laboratories while conducting experiments. It is made of high quality material which ensures durability and long lasting usage.

The Table Clamp is designed to support meter sticks and other round or square rods, either vertically or horizontally up to 1" (25mm) thick. The Vee's are milled at right angles and the clamp can be mounted on table edges up to 1-3/4" (45mm) thick. Each jaw can be adjusted separately. Heavy cast…

These extension clamps features heavy-duty electroplated zinc alloy construction, dual prong adjustments and addtional fiberglass sleeves. Clamps have a max temperature use of 80°C. CLHD01 - 4" long extension rod is constructed of stainless steel. Prongs open to about 1.75",…

The materials steel and aluminium ensure that the stop-it metal is extremly heat resistant and sturdy. The hose clip is available in four different sizes, for hose diameters up to max. 30 mm. The hose clip can be used wherever the flow in hoses with liquids or gases needs to be regulated or…

Stainless steel Pinch clamps are for use with O-ring and ball and socket clamps All sizes except 1236D18 and 1236D20 have screw locking devices. Only screw locking clamps are recommended for O-ring joints. All clamps are made of 304 –18/8 Stainless Steel.

Reversible; can also be stacked upon each other. Three sizes provide six different diameters for round-bottom flasks ranging from 50 to 6,000 mL. Excellent adhesion to glass prevents slippage and also offers thermal and electrical insulation. Available in two rubber types.

Clamp holders for rods up to 19mm (0.75") in diameter. Available in Cast Iron or Brass.

Screw Compressor Clamps are made fo steel wire and nickel plated. Opens to either 3/4" or 1" and is available as a “closed” or “open” type.

Used to hold apparatus near the lab-frame. Unlike extension clamps, the swivel clamps have an integral holder for attaching to a lab-frame or other apparatus. Built-in holder grips rods up to 19mm (0.75") in diameter and is adjustable for forward or reverse-facing adjustment screws. Shaft…

Thomas No. 1227W29 Small stand for T 10 basic. Diameter of support rod: 10 mm Dimensions: (W x D) 242 x 355 mm Height: 370 mm Max. load: 0.7 kg Thomas No. 1203D30 With slip resistant foil. Max. load: 5 kg Dimensions: (W x D): 200 x 316 mm Height: 560 mm Thomas No.…

Regular Clamp Holders Stainless steel electro-polished finish or nickel-plated zinc construction. Ideal for holding clamps to lab-frames. Use wherever clamping at 90° is required. Swivel Holders Two rod holders with center swivel capacity allow tilting of clamps at any angle in…

These economical KECK adapters, clamps, and clips will not scratch glass or corrode—ideal for glass and tubing assembly. All KECK products are color-coded for fast, easy size identification. Use quick disconnect adapters for safe, convenient tubing-to-tubing or tubing-to-glass connections.…

Clamp features vinyl coated three pronged jaws that open to 2.25" wide. Includes fiberglass sleeves and a clamp holder that can be rotated 360°.

All stainless steel screw mechanism and anodized aluminum top and bottom plates.

This clamp is constructed from hardwood with a smooth finish and self-closing spring. The clamp will accept tubes up to 3/4" (19mm) in diameter. Overall length is 7" (178mm).

A cast iron clamp with nickel plated steel set screws. Sold individually. Available in the following sizes: 2" OD 3" OD 4" OD 5" OD 6" OD

Stainless steel electro-polished finish or nickel-plated zinc Large grip adjustment range 2-prong construction Single or dual adjust Designed to securely hold laboratory glassware and apparatus. Extension arm attaches clamp head securely and offers easy positioning in the deepest…

A cast aluminum clamp with cork lined prongs to hold a flask securely. The jaws open to a maximum of 3". Overall length 9.5".

Cast iron bases with gray enamel finish. The base is 3mm thick with a welded plate on the mounting hole. This gives the support rod 10mm of screw support, which is three times thicker than other traditional stands. The support rod includes an 80mm long rod to provide more torque when securing the…

Cast aluminum clamp with nickel plated steel thumb-screw. The clamps jaws have a range of 3/8" x 1-3/8".

Clamp Retort, 3 Prong, Powder coated 3 Prong, Powder coated clamp Over all Length 10" Prongs have 2" of PVC coating. Clamping tommy-bar screw through swivels, Clamping tommy-bar screw through swivels, mounted on 5.625" rod. Rod dia. 8 mm (0.315") Jaw…

Easily attaches top most lab benches Frees up bench space Flexible support arm Support system easily attaches to the side of your lab bench or counter top, which helps utilize more space in your lab. Ultra Flex clamping system is extremely versatile and features a flexible arm that…

This highly stable jack can be adjusted to any height between 2-1/2" to 10" (64mm to 254mm). The jack will accept loads up to 10 lbs. (45.4 kg). The unit is constructed of aluminum top and bottom plates with a baked-enamel finish and plated steel cross members. Height adjustments are achieved by…

Strong, excellent quality laboratory support jack, made of aluminum and stainless steel. Vertical height to 26cm;15cm x 12cm top and base plates. Also available with removable 20cm x 20cm platform and a 45cm long support rod.

Corning offers a 7/16" (1.1cm) diameter by 6 1/2" (16.5cm) support clamp for Corning Cat. No. 6795PR and 400188 temperature probes. Support has two openings, 1/3" (9mm) and 0.15" (3.75mm), for holding probes. It is designed to be used with a boss head clamp (Corning Cat. No. 440140) or standard…

These stainless steel, corrosion resistant clamps use strong spring closed forced jaw designed for securing standard taper joints.

Hook Collar clamps are ideal for suspending pulleys, balances, etc from support rods or cross members. Available for rods up to 0.5" or 0.75".

Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.

Clamp Bosshead, Synthware, For rods up to 15mm diameter, chrome plated finishwith plastic headed screws.

Components from Lattice Lab Sets are available individually so sets can be expanded to accommodate customized needs.