Whirl-Pak® Sample Collection Tools – Swings Samplers and Sludge Nabbers – are intentionally designed for those collecting samples from a horizontal flowing stream to make sample collection of liquids fast and easy. The Sludge Judge® is designed to take accurate readings of…

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner. close-it has been…

UltraSnap ® is a user-friendly, all-in-one ATP sampling test used with Hygiena ® luminometers. This pen-sized sample collection device is easy to use, small, and environmentally friendly. In addition, UltraSnap ® uses a unique liquid-stable reagent providing superior accuracy,…

The LaboPlast® Bio disposable scoop made of green PE is produced in our clean room of class 7 (10,000) and individually wrapped in bio-PE film for disposable use. Green PE bio-plastic has all the suitable properties of conventional polyethylene but is manufactured from renewable raw…

Extendable for sampling tank trucks or drums Top spin bar and bottom valve plate mechanism provide positive seal for sample retention along with greater control for releasing sample. Modular design has extra flexibility by permitting connection of several sections to form larger sampling…

The SteriPlast® sample scoop made of polystyrene is produced and assembled in our clean room of class 7 (10,000, except for the 1000 ml scoop), individually wrapped for disposable use and then sterilised by gamma rays. The sample scoop is ideal for powders, granulates and pastes. The…

Impermeable to gases; low sample loss in storage Low memory of previous sample; can be reused Tough, flexible, fatigue-resistant Large sample port for flushing; three convenient eyelets These bags are fabricated from 2 mil thick PVF (Tedlar) film, a material that is inert…

Dynalon’s new versatile modular liquid handling series fits all your needs. Whether sampling from drums or rail cars, stirring vats or dipping chemicals from a bath... we have the configuration to fill your requirements. Components are available piecemeal, as intuitive kits or buy the…

The ChemoSampler was developed for sampling aggressive liquids, e.g. acids, alkalis, detergents. The samples are drawn directly into the screw-on original sampling bottle. The tamperproof bottle closure of these bottles with original safety ring ensures unadulterated sample transport. Samples can…

Easily transfer small quantities of materials with this trough-style spoon. Available in plain, polished stainless steel or with Teflon® FEP coating 17cm (6.7") length useful for reaching into containers Square trough-type spoon end: 44 x 8.9mm (1.75 x 0.35")

The SteriWare LiquiThief is simple to use and comes with the added advantage that there is no cleaning validation and no cleaning. The sampler is made in a cleanroom so you simply unwrap and use. If you want to buy a disposable liquid sampler then the LiquiThief is the sampler of choice. The…

The PerkinElmer sample tray cover is installed on the auto sampler tray of AS-800 and AS-900 absorption instruments to cover the sample cups.

Biocide free cellulose sponges in a variety of pre-hydrated dilutions for sample collection. Our hydra sponges are pre-moistened for convenience, durable, biocide-free cellulose maintains organism viability. Benefits: Improved consistency Increased accuracy of results Reduced…

Q-Swab is a ready-to-use sample collection and delivery device for environmental surface sampling. Money and time are saved by eliminating pipettes and broth preparation required with other sample collection methods. Each of the broths offered in Q-Swab are self-contained, gamma irradiated and held…

The PerkinElmer Sample Tray for PerkinElmer AS-93 plus/S10 Autosampler (rinsing-port rack) with rinsing port location (location 0), 8 locations for 50 mL solution containers, and 29 locations for 15 mL solution containers.

Clear body made of Teflon with precision ground ball check Easily disassembled for cleaning No threads for contaminants to lodge Ultra-secure handle will not detach accidentally Available in 1 or 3 foot lengths 1 3/4” o.d. for 2” or larger wells Capacity…

Burkle DispoPipette for taking samples of liquids which are low in viscosity. (21mm diameter) These single-use DispoSamplers are available in packs of 20 each. They are used to take target point samples, all-layer and cross-sectional samples of liquids, viscous substances, powders, crystals,…

The Mawi DNA Technologies blood collection kit with a capacity of 600 uL is used for the collection, storage and transportation of blood for the laboratory analysis of serum.

Sampler for pourable bulk goods up to approx. 1 cm in diameter. This makes it possible, for example, to remove hazel nuts, blends of tea, grain or similar items from large sacks. Also for coarse-grained bulk goods Made of stainless steel AISI 316L (1.4404) Special geometry of the tip

SterilEnz Samplers were designed to solve the problem involving contamination of the critical access point on single-use products. Samplers are widely used on Single-Use Bioreactor Bags and a variety of other sampling systems SterilEnz Samplers are made using our Anti-Slip Luer Boot …

The fume hood can be connected to an in-house laboratory exhaust system or used with the SPB blower unit (N9308022). Fume hoods come flat packed to save transport costs and can be assembled in minutes without tools.

Tube Adapter 50 ml pkg.6

Ergonomic curved handle offers easy handling Double bagged for extra protection from contamination Ideal for use in multi-zone cleanrooms FDA-grade material; safe for food, drug, and cosmetic contact Gamma irradiated sterile These sterile polystyrene (PS) sampling spoons feature a long…

Unique spatula both scoops material and instantly displays weight. Balance with digital display is located in the easy-grip handle. The weighing range is 0 to 300.0 grams and 0 to 10.580 ounces. Readability is 0.1 gram and 0.005 ounce. Level position repeatability is 0.1 gram and accuracy is…

The range of Steriware Volumetric Spoons has both sterile and non-sterile options available in a range of different sizes from 1ml up to 20ml. Moulded and packed in a cleanroom, we ensure the highest standards of cleanliness and hygiene. These FDA conforming HDPE spoons are ready to be used…

Ideal for scooping out fixed volumes of powder. These Measuring Scoops are made from high quality 316 stainless steel. The scoop bowls are accurately machined from solid stainless steel. Key Features: Manufactured in 316L Stainless Steel Accurately measures powders Note: These are…

These multi-purpose Stainless Steel Clamp Containers from Sampling Systems are ideal in a wide range of hygienic applications. 316L Stainless Steel Crevice free interior Secured with lid, clamp and silicone seal (FDA Acceptable grade)# Wide 4" (100mm) diameter tri-clamp lid BS 4825-3 …

The SteriWare™ Disposable Powder Funnel is ideal for transferring powders. Available both sterile & non-sterile. Made from chemically resistant, food grade HDPE. Key Features: Moulded & packed in a Class 100,000 Cleanroom Individually bagged Made from FDA, EC…

Sample cups are of heavy-duty construction to prevent cracking or tipping. Their conical design allows for use of nearly the entire sample. Translucent; preferred for most solvents.

Heavy nylon line calibrated from 0 to 20 meters in 1 meter increments Lower end of line is fitted with brass hook for attachment to sampling devices, Secchi disk, etc. With removable 2-lb (0.91-kg) lead weight Top end of line is attached to a foam plastic float which also serves as…

Measuring scoops of polypropylene and polyethylene in a variety of sizes. Volume marked in mL on the handle.

This kit includes: Type K1 Standard Nebulizer (N0777707) 1-slot Quartz Torch (N0790131) 2.0 mm Alumina Injector (N0791183) Baffled Cyclonic Spray Chamber (N0791352)