Oil Centrifuge Tube

Compare Tool

Select up to 3 products

Oil Centrifuge Tube
1 - 29 of 29
Sort
View
Show
  • Kimax® Oil Centrifuge Tube with Permanent Red Stripe and Graduations, 100 mL

    Kimble

    KIMAX® conical bottom centrifuge tube is used for testing of petroleum products according to ASTM D91, D893 and D1796. Tube has a permanent red stripe under the white enamel graduations for easy reading of results Scale and legend are durable white ceramic enamel Top is tooled to…

  • Kimble Oil Centrifuge Tubes

    Kimble

    Oil Centrifuge Tube (2623Q33) In accordance with ASTM D 96 Capacity 125 mL Graduations: from 5 to 10 in 1 from 10 to 25 in 5 at 50 and 100 per ASTM Standard D 96 Fits Thomas number 2525C07 Carrier and 2525C05 Rotor in IEC Centrifuges.

  • Short Oil Centrifuge Tube, TC

    Wilmad LabGlass

    Calibrated "to contain" (TC), this borosilicate glass short oil centrifuge tube is designed to be utilized in the field. It is used in petroleum test methods ASTM D 96 AND API Code 2500. Reference No. ASTM D 96

  • Lazer-Fused™ Petroleum Centrifuge Tubes

    Kimble

    …Lazer-Fused™ 6” Short Cone Centrifuge Tubes For determination of water and sediment in crude oil. 1169H93: Lazer-Fused™ 8" Long Cone Centrifuge Tubes Used in the determination of water and sediment in crude mineral oils, fuel oils and other petroleum products…

  • PYREX® Oil Centrifuge Tube

    Corning

    Graduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…

  • Portable Heated Crude Oil/Petroleum Centrifuge

    LW Scientific

    Made from durable, rugged ABS Plastic, this portable centrifuge is ideal for field use. The Portable Heated Crude Oil Centrifuge from LW Scientific is the perfect solution for oil testing. This newest member of our USA centrifuge initiative features a ZERO-RPM locking lid for safety and digital…

  • Hand-Driven Centrifuge

    Boekel

    …sediment and water in crude oil Speeds up to 2000 RPM 16: 1 gear ratio Portable and lightweight Rugged Wide sweep cast aluminum crank has a spring clutch which assures effortless and safe start up and stopping. Supplied with centrifuge head that holds 2 x 15 ml tubes, two aluminum shields,…

  • Bulb Oil Centrifuge Tube

    Wilmad LabGlass

    Calibrated "to contain" (TC), this Goetz-type borosilicate glass bulb oil centrifuge tube is a pear shaped tube, similar to LG-4420, but it has a lower stem calibrated to hold 1.5mL. Specified in ASTM Method D 96 as suitable for a number of tests on petroleum products. Reference No.…

  • Tube, Centrifuge, Oil, 100ml

    Kimble

    tube used in the determination of water and sediment in crude mineral oils, fuel oils and other petroleum products D1796 and MPMS 10.4 standards); in determination of volume of precipitate formed by centrifuging definite quantities of steam cylinder stocks and black oils and other lubricating oils

  • Oil Centrifuge Tube

    Kimble

    Can be used in the determination of residues in liquified petroleum (LP) gases, ASTM Method D 2158 Calibrated "to contain" Capacity 100 mL Graduations: 0 to 1 in 0.05 mL Dimensions: 37 mm o.d. x 203 mm L.

  • Pyrex Oil Conical Centrifuge Tube

    Corning

    These 100mL PYREX® conical centrifuge tubes have white graduations and are used in accordance with standard methods of testing for water and sediment in petroleum products. These tubes are graduated upward to 0.5mL in divisions of 0.05mL; from 0.5mL to 2mL in divisions of 0.1mL; from 2mL to 3mL…

  • Hettich Rotofix 46 Benchtop Centrifuge

    Hettich Instruments

    …(4600-51). The Rotofix 46 H heated centrifuge provides a temperature range of 1 °C up to +90 °C, an ideal fit for applications such as crude oil testing. A wide variety of rotors, buckets and accessories are available including a universal swing-out rotor for tubes & bottles ranging from 1.5 mL…

  • PYREX® Oil Centrifuge Tubes

    Corning

    Pear-Shaped In accordance with ASTM D 91, D 96; API Standard 2500 Capacity 100 mL Calibrated "to contain" Graduations:  from 0 to 1/2 in 0.05  from 1/2 to 2 in 1/10  from 2 to 3 in 1/5  from 3 to 5 in 1/2  from 5 to 10 in 1  from 10 to 25 in 5  at…

  • Capillary Tip Centrifuge Tube

    Wilmad LabGlass

    Designed for use in ASTM D-2273 and ASTM D-2709, this borosilicate glass capillary tipped long form centrifuge tube is 200mm in length.

  • Rotor Assembly for Long Tubes

    Koehler

    …1209Q14 – 1209Q16 Tube is 8" Marked in mL and can be used with our Oil Test Centrifuge with Long Cone Rotor in conformance with D91, D96, D893, D1796, D4007 Thomas No. 1209Q17 Tube is 8" Marked in mL and can be used with our Oil Test Centrifuge with Long Cone Rotor in…

  • Long Oil Centrifuge Tube, TC

    Wilmad LabGlass

    Calibrated "to contain" (TC), this borosilicate glass long oil centrifuge tube is used for determinations of water and sediment in petroleum and its products, including fuel oils and lubricating oils. See ASTM Methods D 96, D 1796 and D 91 and also API Code 2500. Reference No. ASTM D…

  • Auto Heated Centrifuge

    Koehler

    …4 tubes Pear tube rotor assembly, 115 and 220 Volt fully automated bench top centrifuge with integrated heating system which accommodates a capacity of 4 tubes Finger tube rotor assembly, 115 and 220 Volt fully automated bench top centrifuge with integrated heating system and finger tube

  • Portable Heated Centrifuge

    Koehler

    …Cone Tube Tube is 6" Marked in 200 Parts Every 4 Parts Above 20mL and can be used with our Portable Centrifuge; Oil Test Centrifuge with Short Cone Rotor in conformance with D96 Thomas No. 1209Q00 - Centrifuge Tube Tube is 6" Marked in mLs and can be used with Portable Centrifuge; Oil Test…

  • Centrifuge Tube Oil, 100 ml

    Corning

    These 100mL PYREX® pear-shaped centrifuge tubes are used for determination of water and sediment in petroleum products. They are fabricated from mold-blown blanks to insure uniform shape and greater mechanical strength. The scale and figures are durable white enamel which stand out clearly against…

  • Tube Centrifuge Oil Short

    Kimble

    KIMAX tube designed for field use in testing petroleum. Calibrated to contain. Scale and legend are durable white ceramic enamel. Top is tooled to accept a Snap Cap (28150R-6) Graduated in %. 100 mL equals 200%

  • Tube Centrifuge Oil Stem 200%

    Kimble

    KIMAX tube used in the determination of bottom sediment and water in petroleum products and in the determination of foots in raw linseed oil by the gravimetric method (ASTM D1966). Calibrated to contain Stem diameter holds 1.5 mL Scale and legend are durable white ceramic enamel

  • Ceramic Grind Cyld 5/16"x5/8" angle cut

    SPEX SamplePrep

    Medium ceramic grinding cylinders with angle-cut ends for use with standard 15 mL centrifuge tubes. Useful for mixing samples for extraction methods such as pesticide residue analysis (QuEChERS) or extracting oil from fish and seafood. The angle-cut ends help the cylinders to shear the sample matrix…

  • Capillary Tip Centrifuge Tubes

    Wilmad LabGlass

    This long form 100mL capacity oil centrifuge tube has a capillary tip that makes it ideal for use when only small amounts of solids are present. Made of borosilicate glass, its approximate widest O.D. is 38mm and approximate length is 200mm. Reference No. ASTM D 2709

  • Zero Waste Box: Centrifuge Tubes & Rigid Lab Plastics

    TerraCycle

    Use this box to recycle your used and empty plastic centrifufge tubes and other rigid lab plastics, including plastic bottles, trays and vials. Please choose the size box you'd like to purchase. When you receive your box fill it with the appropriate waste streams. Once full ship your box…

  • Tube 10 ml

    Corning

    These 10mL PYREX® conical centrifuge tubes are used in connection with the Wasserman test. Also used to measure H2O content and potassium ions in oil muds. API RP 13B standard testing method. They are graduated in 0.1 mL divisions up to 4 mL, and 0.2 mL divisions from 4 to 10 mL …

  • AMPLITUBE™ 0.2mL PCR Reaction Tubes with Attached Caps

    Simport

    …resealable safety-lock bags.S Series T325-1V & -2V (Thomas Nos. 1166H58-1166H67): Ideal tube design when centrifugation is necessary. These tubes are identical to the T325-1 & -2 Series but without a contamination shield. Tubes are certified RNase, DNase, Pyrogen and DNA-free.

  • 0.2mL Thin-Wall Micro Reaction Tubes & Strip Caps

    Bio Plas

    …is 200 µL Tubes and Strip Caps are packaged non-sterile and are autoclavable at 121°C, 15 PSI for 15 minutes. Remove from autoclave immediately Strip Tubes and Strip Caps may be easily cut CAUTION: Tubes are not intended for storage or centrifugation of organic solvents;…

  • Ceramic Grind Cyld 3/8"x7/8" angle cut

    SPEX SamplePrep

    Large ceramic grinding cylinders with angle-cut ends for use with standard 50 mL centrifuge tubes. Useful for mixing samples for extraction methods such as pesticide residue analysis (QuEChERS) or extracting oil from fish and seafood. The angle-cut ends help the cylinders to shear the sample matrix…

  • Two-Stage Direct Drive Vacuum Pumps

    Thermo Scientific Precision

    …concentration, centrifugation, freeze-drying, degrassing, cryogenic studies, mass spectrometers, leak detectors, residual gas analyzers, electron microscopes, vacuum coating and deposition, tube evacuation and much more. All pumps are built to reduce heat build-up and keep oil contamination to…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.